T959 Flash Problem - GSM-Forum

kamransohail786 · 01-04-2013, 20:33

Hi,i have just flash T959 with NS-Pro....after flash i have following error on screen after power on....

E:Can't mount /dev/block/st110 (Invalid argument)
E:Copy_dbdata_media:Can't mount DBDATA:
copy default media content failed.

How i can solve this problem.thanks

Elco · 01-04-2013, 22:00

PLZ check the exact model of your phone: T959, T959V, T959P and use the firmware for that exact model.

shawn4life · 01-04-2013, 22:16

Quote:

Originally Posted by kamransohail786

Hi,i have just flash T959 with NS-Pro....after flash i have following error on screen after power on....

E:Can't mount /dev/block/st110 (Invalid argument)
E:Copy_dbdata_media:Can't mount DBDATA:
copy default media content failed.

How i can solve this problem.thanks

which service provider the phone was from ?

kamransohail786 · 01-04-2013, 23:56

Quote:

Originally Posted by Elco

PLZ check the exact model of your phone: T959, T959V, T959P and use the firmware for that exact model.

Hi,Elco... phone is T959 and i used the same model firmware......i also flashed the phone with Odin3..ver 1.85... by selecting PIT....s1_odin_20100512.pit....and PDA file....but after flash phone start and stuck in Recovery Mode with above errors...Now how i can solve this problem.Thanks

Elco · 01-05-2013, 03:13

1. what was the initial phone state? why did you flashed the phone?
2. what firmware was originaly on the phone?
3. What firmware you flashed on that phone?

kamransohail786 · 01-05-2013, 11:24

Quote:

Originally Posted by Elco

1. what was the initial phone state? why did you flashed the phone?
2. what firmware was originaly on the phone?
3. What firmware you flashed on that phone?

phones was working fine...only specific application is not running...so i flashed it
original firmware was 2.1
i flashed it with T959UVJI6 and then
i flashed it with Odin3-v1.85 with these files

1- s1_odin_20100512.pit
2- and select PDA as T959UVJI6 and then second time with T959UVKB1

Elco · 01-05-2013, 13:27

Quote:

Originally Posted by kamransohail786

1- s1_odin_20100512.pit

That was you BIG mistake

You should NOT use pit file, unless the phone is damaged in some way.
The i9000 pit that you used damaged the phone.

Download T959 pit file from NsPro support area (firmwares->T959) and flash the phone again using that pit.

Next time when you flash a phone, DONT USE PIT FILE!!! Use only firmware file.

01-04-2013, 20:33	#1 (permalink)
kamransohail786 No Life Poster Join Date: Jan 2004 Location: Pakistan Posts: 779 Member: 49285 Status: Offline Thanks Meter: 51	T959 Flash Problem Hi,i have just flash T959 with NS-Pro....after flash i have following error on screen after power on.... E:Can't mount /dev/block/st110 (Invalid argument) E:Copy_dbdata_media:Can't mount DBDATA: copy default media content failed. How i can solve this problem.thanks

01-04-2013, 22:00	#2 (permalink)
Elco No Life Poster Join Date: Dec 2002 Location: Romania Posts: 10,018 Member: 19254 Status: Offline Sonork: 100.72990 Thanks Meter: 25,395	PLZ check the exact model of your phone: T959, T959V, T959P and use the firmware for that exact model.

01-05-2013, 03:13	#5 (permalink)
Elco No Life Poster Join Date: Dec 2002 Location: Romania Posts: 10,018 Member: 19254 Status: Offline Sonork: 100.72990 Thanks Meter: 25,395	1. what was the initial phone state? why did you flashed the phone? 2. what firmware was originaly on the phone? 3. What firmware you flashed on that phone?