elco or anybody can help me - GSM-Forum

headszone1 · 08-29-2012, 17:12

i have 1 samsung i5503t saying too many attempted to signin can you tell me how to hard reset it or flash it

Elco · 08-29-2012, 17:31

Unlock it using latest NsPro version

headszone1 · 08-29-2012, 17:39

Quote:

Originally Posted by Elco

Unlock it using latest NsPro version

i have the latest version but which model i should select to unlock it and instruction how to do it

PratikM · 08-29-2012, 17:49

Yes.......(nspro)
br.
PratikM

headszone1 · 08-29-2012, 18:06

i am using nspro but what next remember its a samsung i5503t and i dont see that in model list is i5500 is the same thing and the problem it say too many attempted try

godwin · 08-29-2012, 18:39

tried this

1. REMOVE BATTERY & PUT IT BACK

2. HOLD VOLUME UP BUTTON & MIDDLE BUTTON (HOME BUTTON)

3. WHILE HOLDING THIS TWO BUTTON PRESS POWER BUTTON AND REALEASE(PRESS POWER BUTTON ONLY ONCE)

4.IT WILL POP UP WITH HARD RESET MENU

5. SCROLL DOWN TO FACTORY RESET WITH VOLUME DOWN BUTTON THEN PRESS CENTER BUTTON OR HOME BUTTON

6. THEN PRESS VOLUME DOWN BUTTON TO SELECT YES FACTORY SETTINGS THEN PRESS CENTER BUTTON

7. SELECT REBOOT DEVICE AND PRESS CENTER BUTTON

headszone1 · 08-29-2012, 18:48

Quote:

Originally Posted by godwin

tried this

1. REMOVE BATTERY & PUT IT BACK

2. HOLD VOLUME UP BUTTON & MIDDLE BUTTON (HOME BUTTON)

3. WHILE HOLDING THIS TWO BUTTON PRESS POWER BUTTON AND REALEASE(PRESS POWER BUTTON ONLY ONCE)

4.IT WILL POP UP WITH HARD RESET MENU

5. SCROLL DOWN TO FACTORY RESET WITH VOLUME DOWN BUTTON THEN PRESS CENTER BUTTON OR HOME BUTTON

6. THEN PRESS VOLUME DOWN BUTTON TO SELECT YES FACTORY SETTINGS THEN PRESS CENTER BUTTON

7. SELECT REBOOT DEVICE AND PRESS CENTER BUTTON

this does not work i have tired a million time

unlock.mk · 08-29-2012, 18:53

1: start without sim and type *#7284#
select usb

2: restart your phone

3: go to setting > application > development > select USB debugging

4: connect usb cable then select KIES mode

or

1. Enter code *#7284# - choise phone usb.
2. Enter code *#9090# - choise usb diag. (or *#197328640# -> 9 -> 4 -> usb diag ) then reboot phone
3. Connect cable. Setup drivers
4. Select Diagnostic port in port settings
5. Press Unlock SP button.

copied from another section, but it may help u to unlock it with NsPro

headszone1 · 08-29-2012, 19:14

Quote:

Originally Posted by unlock.mk

1: start without sim and type *#7284#
select usb

2: restart your phone

3: go to setting > application > development > select USB debugging

4: connect usb cable then select KIES mode

or

1. Enter code *#7284# - choise phone usb.
2. Enter code *#9090# - choise usb diag. (or *#197328640# -> 9 -> 4 -> usb diag ) then reboot phone
3. Connect cable. Setup drivers
4. Select Diagnostic port in port settings
5. Press Unlock SP button.

copied from another section, but it may help u to unlock it with NsPro

you guys or not listening to me too many pattern attempted that is the problem i cant dial ntn

Elco · 08-29-2012, 20:35

Quote:

Originally Posted by headszone1

i have the latest version but which model i should select to unlock it and instruction how to do it

Select i5500 on NsPro.
Connect the phone to NsPro S7070 RJ45 cable
Go to service jobs and perform both operations.

Post the result.

headszone1 · 08-29-2012, 20:44

Quote:

Originally Posted by Elco

Select i5500 on NsPro.
Connect the phone to NsPro S7070 RJ45 cable
Go to service jobs and perform both operations.

Post the result.

thanks elco you are the best thank you alot

08-29-2012, 17:12	#1 (permalink)
headszone1 No Life Poster Join Date: May 2011 Location: tropical island Posts: 1,455 Member: 1568769 Status: Offline Sonork: 161.1167 Thanks Meter: 208	elco or anybody can help me i have 1 samsung i5503t saying too many attempted to signin can you tell me how to hard reset it or flash it

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HELP!!! BACKGROUND SCREEN LOGO	Michael Go	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	11-23-2017 08:11
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29
How can I do a Welcome note for my 6110 a dosn't have any one ?	Viper	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	06-27-2015 11:57
Eeprom dump lost, help needed.	CAMILO	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	11-29-2010 19:04
Help with 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-25-2009 16:29

08-29-2012, 17:31	#2 (permalink)
Elco No Life Poster Join Date: Dec 2002 Location: Romania Posts: 10,018 Member: 19254 Status: Offline Sonork: 100.72990 Thanks Meter: 25,395	Unlock it using latest NsPro version

08-29-2012, 17:49	#4 (permalink)
PratikM Insane Poster Join Date: Aug 2012 Location: OWN PLACE Posts: 75 Member: 1803639 Status: Offline Sonork: 100 Thanks Meter: 6	Yes.......(nspro) br. PratikM

08-29-2012, 18:06	#5 (permalink)
headszone1 No Life Poster Join Date: May 2011 Location: tropical island Posts: 1,455 Member: 1568769 Status: Offline Sonork: 161.1167 Thanks Meter: 208	i am using nspro but what next remember its a samsung i5503t and i dont see that in model list is i5500 is the same thing and the problem it say too many attempted try

08-29-2012, 18:39	#6 (permalink)
godwin No Life Poster Join Date: Jun 2005 Location: Ghana Age: 39 Posts: 2,005 Member: 153893 Status: Offline Thanks Meter: 266	tried this 1. REMOVE BATTERY & PUT IT BACK 2. HOLD VOLUME UP BUTTON & MIDDLE BUTTON (HOME BUTTON) 3. WHILE HOLDING THIS TWO BUTTON PRESS POWER BUTTON AND REALEASE(PRESS POWER BUTTON ONLY ONCE) 4.IT WILL POP UP WITH HARD RESET MENU 5. SCROLL DOWN TO FACTORY RESET WITH VOLUME DOWN BUTTON THEN PRESS CENTER BUTTON OR HOME BUTTON 6. THEN PRESS VOLUME DOWN BUTTON TO SELECT YES FACTORY SETTINGS THEN PRESS CENTER BUTTON 7. SELECT REBOOT DEVICE AND PRESS CENTER BUTTON

08-29-2012, 18:53	#8 (permalink)
unlock.mk No Life Poster Join Date: Oct 2011 Location: Macedonia Posts: 1,196 Member: 1671934 Status: Offline Thanks Meter: 247	1: start without sim and type #7284# select usb 2: restart your phone 3: go to setting > application > development > select USB debugging 4: connect usb cable then select KIES mode or 1. Enter code #7284# - choise phone usb. 2. Enter code #9090# - choise usb diag. (or #197328640# -> 9 -> 4 -> usb diag ) then reboot phone 3. Connect cable. Setup drivers 4. Select Diagnostic port in port settings 5. Press Unlock SP button. copied from another section, but it may help u to unlock it with NsPro