6111 flashing ok with phoenix 136

[ramos]

Hi to everybody,
i just success to flash 6111 with latest release of phoenix.
I kow that the firmware 0D is not ready but i installed successfully by using the trick to register manually the 2 dll.
As you can see i used latest 6111 datapackage (not uploaded yet in support).
For people who tried to flash this model with DKU-2,i think it's no need to try,only FBUS flashing is available (it's only my opinion i have no info about it).

[Gsm-W]

Originally Posted by ramos

Hi to everybody,
i just success to flash 6111 with latest release of phoenix.
I kow that the firmware 0D is not ready but i installed successfully by using the trick to register manually the 2 dll.
As you can see i used latest 6111 datapackage (not uploaded yet in support).
For people who tried to flash this model with DKU-2,i think it's no need to try,only FBUS flashing is available (it's only my opinion i have no info about it).

Can you share the trick ?? How you do it ??

Best Regard
Gsm-W

[Royslade]

The trick is already in this forum... Check this link: http://forum.gsmhosting.com/vbb/show...6&postcount=16
Copy these dll's and write over the originals in the C:\Program Files\Nokia\Phoenix\Framework directory. With these files the latest Phoenix can be used by PBB.

BR Roy

[Chevka]

Now I'm using phoenix_service_sw_2005_44_4_120 if I want to install phoenix_service_sw_2006_12_5_136, Do I have to Uninstall the older version first or just install the new one???

Btw, can you use phoenix_service_sw_2006_12_5_136 with PKD-1RD Mode or FLS-4S mode??
because if i use the PKD-1RD Mode allways appear error message about Deskey..

thank you in advance,

[ramos]

Originally Posted by Chevka

Now I'm using phoenix_service_sw_2005_44_4_120 if I want to install phoenix_service_sw_2006_12_5_136, Do I have to Uninstall the older version first or just install the new one???

Btw, can you use phoenix_service_sw_2006_12_5_136 with PKD-1RD Mode or FLS-4S mode??
because if i use the PKD-1RD Mode allways appear error message about Deskey..

thank you in advance,

First i uninstall older version (i used 123)
After i install the version 136,reboot the system and wait for the register finish.If all is good you must have 2 dll not registered in the report.
Copy fthe 2 files scripcontex.dll and context.dll in C:\

run the command console and execute:

C:\WINDOWS\system32\regsvr32.exe c:\scriptcontext.dll
C:\WINDOWS\system32\regsvr32.exe c:\context.dll


After that run the PBB v136 and all will be good (130 or higher version is needed for flashing some models with latest datapackage eg 6111).
Thanks to Pmdos34 for this trick.