5310 china dead - GSM-Forum

mvtamele · 08-23-2008, 17:07

hi ppl i got 1 5310 that is dead cos power failure i was farmating it(ffs:safe) what to do now? it was 67 0/0 percent is it dead completely?
here is the log:

COM3 [VCP0] selected
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:A103:0001
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: HB5M411B1.7.1.1.10T10M0218_M411B
Version: X225B_HW
detecting structure #2...
0 done
44 byte(s) read
imei: 35865301239138
connection Ok
building list...
done
items to clear: 200

tsarkh · 08-23-2008, 19:32

As U Can Know The Firmware Of It U Can Try To Get The Same Verion From Support Site And Flash It

But First To Be Safe Read Full Flash Of It And Keep It

Before U Flash The Flash File U Get From Support Try To Format Complete

So 1 - Read Full Flash
2 - Do Format Complete
3 - If That Does Not Help Try To Flash It With The Same Version From Support

Good Flashing For All

08-23-2008, 17:07	#1 (permalink)
mvtamele Freak Poster Join Date: Nov 2005 Location: Mozambique, Maputo Posts: 196 Member: 201534 Status: Offline Thanks Meter: 7	5310 china dead hi ppl i got 1 5310 that is dead cos power failure i was farmating it(ffs:safe) what to do now? it was 67 0/0 percent is it dead completely? here is the log: COM3 [VCP0] selected Action: reset settings Model: Autodetect 6205-6227 NOR Checking data, wait... Phone should be Switched OFF ! Press and HOLD Power button now ! 19200 autodetect Initializing[6225:8A03:8A00]... CPU: MT6225 high speed boot enabled chip: 0001:A103:0001 Connecting, wait... Release Power button now ! Phone detected, wait... Hardware: MT6225,E03 Date: 2006.06.14 Version: 1.0 Version: HB5M411B1.7.1.1.10T10M0218_M411B Version: X225B_HW detecting structure #2... 0 done 44 byte(s) read imei: 35865301239138 connection Ok building list... done items to clear: 200

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
5310 china phone dead for infinity box the problem only hung up	lilong_lee	Infinity-Box	10	12-20-2009 22:56
5310 China RM-303 Dead problem while reading eeprom	mobilekeeper	Chinese Models & Cloned Phones	8	08-31-2009 09:03
5310 china dead cannot detected correct firmware	bogg7	Infinity-Box	2	04-14-2009 10:25
Bad software on Nokia 5310 china	asad_nomy7	Infinity-Box	8	02-18-2009 17:10
5310 china phone unknown firmware	markali2006	Infinity-Box	2	05-20-2008 08:55

08-23-2008, 19:32	#2 (permalink)
tsarkh No Life Poster Join Date: Jul 2005 Location: France Age: 48 Posts: 6,857 Member: 165812 Status: Offline Sonork: 100:1627635 Thanks Meter: 4,267	As U Can Know The Firmware Of It U Can Try To Get The Same Verion From Support Site And Flash It But First To Be Safe Read Full Flash Of It And Keep It Before U Flash The Flash File U Get From Support Try To Format Complete So 1 - Read Full Flash 2 - Do Format Complete 3 - If That Does Not Help Try To Flash It With The Same Version From Support Good Flashing For All