GSM-Forum - ADB Drivers For SPD SC7730 Need

GSM-Forum (https://forum.gsmhosting.com/vbb/)

- Infinity-Box (https://forum.gsmhosting.com/vbb/f296/)

- - ADB Drivers For SPD SC7730 Need (https://forum.gsmhosting.com/vbb/f296/adb-drivers-spd-sc7730-need-2016635/)

ADB Drivers For SPD SC7730 Need

Dear Friends,

I Need ADB Drivers For SPD SC7730/SC7737.

I Tried With Possible Drivers But It Didn't Work.

I Tried With These, Android_WinUSB_ADB_Drivers, SP_Drivers_v1.5, ADB Driver, Android-1.0-USB-WINDOWS_4, Etc.

Even When I Connect Qualcomm Or MediaTek Cellphones It's Tacking Competently ADB Drivers.

What Should I Do Now ?.

Hello. On Windows driver installing promport - select
1. "Search drivers on this PC"
2. "Select driver from installed driver list on this PC"
3. Select "ADB Interface" or "Android Device" and then select vendor and "Composite" or "Debug Bridge" driver.

Accept forced install. Done.

I install Samsung driver 2 year ago and never used any other for adb - with Nokia, Samsung, chinese and etc.

My Dear Best Friend,

Operation : Read FullFlash [ v1.06 ]

Code:

1. Remove battery. Insert battery back

2. Press and hold 'VolumeUp' and 'VolumeDown' keys

3. Insert cable
 

 ====  Wait for phone...
 

Phone found! [ 4 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SC7730/7731 eMMC Loader v1.1 Inf 

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!
 

FlashMode Set : Ok!

Detected eMMC Flash , Structure detect Ok!
 

[eMMC_READER] : Step #1 Passed!

[eMMC_READER] : Step #2 Failed!

Error_Info : Connect Failed! ADBAuth not passed? Keep screen unlocked! Repeat procedure again!
 

Reconnect Power/Cable!

After "Step #1 Passed" Cellphone Automatically Power On With Blank LCD So, How To Press "Unlock" Or "Accept" Key ?.

Re-insert battery and power on phone.

My Dear Best Friend,

Finally It Worked.

Operation : Read FullFlash [ v1.06 ]

Code:

1. Remove battery. Insert battery back

2. Press and hold 'VolumeUp' and 'VolumeDown' keys

3. Insert cable
 

 ====  Wait for phone...
 

Phone found! [ 4 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SC7730/7731 eMMC Loader v1.1 Inf 

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!
 

FlashMode Set : Ok!

Detected eMMC Flash , Structure detect Ok!
 

[eMMC_READER] : Step #1 Passed!

[eMMC_READER] : Step #2 Passed!

[eMMC_READER] : Step #3 Passed!
 

Phone found! [ 4 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SC7730/7731 eMMC Loader v1.1 Inf 

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!
 
 

Model Name  : scx35_sp7731geacuccspecBplus_UUI_dt

Model Brand : Karbonn

Model Device: scx35_sp7731gea

AndrVersion : 4.4.2

BaseBand CPU: SP7731GEA

Project Ver : UTLA5Starv1006_20-05-2015

Model Ext   : Karbonn A5*
 

[Read Mode] : HSUSB Enabled!
 

[eMMC_READER] : Reading Firmware Now ... 
 

[Read Ok] : u-boot-spl-16k.bin

[Read Ok] : u-boot.bin

[Read Ok] : prodnv.img

[Read Ok] : sc7731g_CP0_modem.bin

[Read Ok] : DSP_DM_Gx.bin

[Read Ok] : nvitem.bin

[Read Ok] : sc7731g_modem_CP2_WCN_14E_W15.11_Release.bin

[Read Ok] : nvitem_wcn.bin

[Read Ok] : logo_480x800.bin

[Read Ok] : fblogo_480x800.bin

[Read Ok] : boot.img

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : recovery.img

[Read Ok] : userdata.img
 

Firmware Size : 988 MiB

Saved to : D:\InfinityBox\CM2SPD\Flash\SP7731GEA_scx35_sp7731gea_4.4.2_UTLA5Starv1006_20-05-2015\

Done!
 

Elapsed: 01:03:49
 

Reconnect Power/Cable!

My Questions : Why It Took Too Much Time ?. Where Am I Wrong ?.

@ mygsm world,
It is SPD CPU.
It is slow by its concept and require more time...

It will take from next one near 25-30 minutes. Normally - 15-18.

Quote:

Originally Posted by JayDi (Post 11436005)

It will take from next one near 25-30 minutes. Normally - 15-18.

@jaydi,

Means from next version even more faster from current ver???

Quote:

Originally Posted by chandanps18 (Post 11436085)

@jaydi,

Means from next version even more faster from current ver???

no bro Spd Cpu always read very slow

Quote:

Originally Posted by chandanps18 (Post 11436085)

@jaydi,

Means from next version even more faster from current ver???

2x times faster. 25-30 minutes against one hour.
Will be 3x times , but later.