After successful flash X1u still dead - GSM-Forum

amol_sm · 05-08-2009, 09:10

Hello,

I receive X1u in dead condition. When i receive this set i try to power on the set when only keypad light glow.....when i relese the power key light is off.
Then i ty to flash the set with TIANYU23_07A_PMJ_PCB01_GPRS_MT6223P_S00.932318_898 _V0004.BIN

before i flash the set the original firmware is Micromax-X1u_TIANYU23_07A_PMJ_PCB01_GPRS_MT6223P_S00.932318 _898_V0010__fullflash_part_1_of_1...

After that complete flash phone still same condition as before.

How to solve this problem Infinity Team

Here is the flashing Log....

Quote:

COM6 [VCP0] selected
module v2.73
Device: Micromax-X1u
Checking data, wait...
advanced flash detection enabled
Action: write NOR flash
"smart write" active
write: Firmware
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
ffs/eeprom backup enabled, it may takes several minutes !
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6223:8A05:8A00]...
CPU: MT6223
chip: 0011:A31F:000C
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 98009600000000:2AEA0000000000
flash: AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud ...
460800
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 detection finished
identification#1 protocol ver: 04
ver. sw 1: TIANYU23_07A_PMJ_PCB01_GPRS_MT6223P_S00.932318_898 _V0010.BIN
ver. sw 2: 932318_898_V0010, 00000000
ffs offset/size: 00600000/00200000
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
sim-lock status: unknown
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: Micromax-X1u_TIANYU23_07A_PMJ_PCB01_GPRS_MT6223P_S00.932318 _898_V0010__ffs...
file saved: C:\Documents and Settings\Amol\Desktop\Micromax-X1u_TIANYU23_07A_PMJ_PCB01_GPRS_MT6223P_S00.932318 _898_V0010__ffs_20090508-131720.B0E.bin
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
Area: Firmware
flash: 98009600000000:2AEA0000000000
Write: Firmware
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
Write Done
Finalization ...
Finalization Done
Finished, time used: 276 sec
Remove/Install battery now !

rajesh_ch · 05-08-2009, 09:22

try to format ffs.if handset is still dead.& then flash with another version & post result.

wbr.
rajesh ch.

amol_sm · 05-08-2009, 09:43

Quote:

Originally Posted by rajesh_ch

try to format ffs.if handset is still dead.& then flash with another version & post result.

wbr.
rajesh ch.

Did u read my first post...

I flash the set with new version & problem remain same

**InfinitySupport** · 05-09-2009, 19:44

There is no any problems with flash process.
What to do:
1. it is need to try to flash phone with other firmware
2. check phone hardware !

baba bagela · 12-14-2009, 09:04

plz help me sir micromax x1u display problem. set is OK. i changed display but display show blue plz help me thanx advance plz jaldi

**InfinitySupport** · 12-20-2009, 20:11

Quote:

Originally Posted by baba bagela

plz help me sir micromax x1u display problem. set is OK. i changed display but display show blue plz help me thanx advance plz jaldi

Hello,

It may be that you need to flash phone with another firmware that has support for your LCD type.

roony86 · 02-15-2012, 09:51

any body help me
my X1u keypad not working and also battery put set auto start then key not working.
pls help me any one

YellowBoss · 02-15-2012, 13:51

Quote:

Originally Posted by roony86

any body help me
my X1u keypad not working and also battery put set auto start then key not working.
pls help me any one

Hello,

Did you check phone hardware already ?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
W850 still white screen after successful flash..	addictz	Sony Ericsson	17	06-02-2010 05:27
kp 199 after done flash not on dead still	Master Software	Z3X-Team Products	1	01-21-2010 19:23
S5233S Dead After Successfully Flashing..	LoveLess	SPT BOX	7	11-29-2009 12:18
K1s after success unlocked but still locked!!!	Brod Aries	Smart-Clip	12	07-08-2008 10:02

05-08-2009, 09:22	#2 (permalink)
rajesh_ch No Life Poster Join Date: Oct 2007 Location: india Posts: 1,760 Member: 618404 Status: Offline Thanks Meter: 311	try to format ffs.if handset is still dead.& then flash with another version & post result. wbr. rajesh ch.

05-09-2009, 19:44	#4 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	There is no any problems with flash process. What to do: 1. it is need to try to flash phone with other firmware 2. check phone hardware !

12-14-2009, 09:04	#5 (permalink)
baba bagela Insane Poster Join Date: Nov 2008 Posts: 62 Member: 913400 Status: Offline Thanks Meter: 2	plz help me sir micromax x1u display problem. set is OK. i changed display but display show blue plz help me thanx advance plz jaldi

02-15-2012, 09:51	#7 (permalink)
roony86 Junior Member Join Date: Apr 2011 Location: coochbewhar Age: 39 Posts: 22 Member: 1550627 Status: Offline Thanks Meter: 1	any body help me my X1u keypad not working and also battery put set auto start then key not working. pls help me any one