GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   Infinity-Box (https://forum.gsmhosting.com/vbb/f296/)
-   -   Alcatel c701 good work i am tested (https://forum.gsmhosting.com/vbb/f296/alcatel-c701-good-work-i-am-tested-495439/)

nafanya 01-28-2008 12:20
Alcatel c701 good work i am tested
 
COM1 selected
Device: Alcatel OT-C701
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: reset
Boot...
Press and HOLD Power button now !
Connecting, wait...
Initializing[6226:8A03:8A02]...
CPU: MT6226
chip: 0031:8C67:A000
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22302200:2BEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x008000 00FEx020000 0004x008000] 32Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
115200
Set baud Done
Identification...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: G:\Program Files\InfinityBox\MModule\backup_security\id.44961 943.[JRD26_06A_PCB01_GPRS_MT6226_S02.MAUI_06A_W06_52_SP 1_V17.BIN_E564E5A7].rpl
New firmware detected:
JRD26_06A_PCB01_GPRS_MT6226_S02.MAUI_06A_W06_52_SP 1_V17.BIN

- make "Repair security area" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
identification#1 detection finished
device-id:
identification#1 protocol ver: 05
ver. sw1: JRD26_06A_PCB01_GPRS_MT6226_S02.MAUI_06A_W06_52_SP 1_V17.BIN
ver. sw2: MAUI.06A.W06.52.SP1.V17
ffs offset/size: 01200000/00E00000
detect device identification#2...
detection phase #1...
detect device identification#2 finished
reading [eeprom[JRD26_06A_PCB01_GPRS_MT6226_S02.MAUI_06A_W06_52_SP 1_V17.BIN]]...
file saved: G:\Program Files\InfinityBox\MModule\backup_eeprom[JRD26_06A_PCB01_GPRS_MT6226_S02.MAUI_06A_W06_52_SP 1_V17.BIN]_20080128-140625.B0E.bin
flash: 01227E22302200:2BEA0000000000
Identification Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
formatting...
flash: 01227E22302200:2BEA0000000000
Write Done
file saved: G:\Program Files\InfinityBox\MModule\backup_system_log_449619 43_JRD26_06A_PCB01_GPRS_MT6226_S02.MAUI_06A_W06_52 _SP1_V17.BIN_E564E5A7_20080128-140841.B0X.bin
Finished, time used: 1660 sec
Remove/Install battery now !

InfinitySupport 01-28-2008 21:50
Thank you very much for good test report !

Please, send
backup_system_log_449619 43_JRD26_06A_PCB01_GPRS_MT6226_S02.MAUI_06A_W06_52 _SP1_V17.BIN_E564E5A7_20080128-140841.B0X.bin
and flash backup to [email protected]

.:iTRi:. 01-28-2008 23:18
goood work team hope see more alcatel phones supported ... e101.e227...

JC_BY 01-30-2008 15:13
Cool! With last update I could reset counter on C701 and allowed to enter NCK code!
Code:
COM7 [VCP7] selected
Device: Alcatel OT-C701
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: repair security area
Boot...
Press and HOLD Power button now !
Connecting, wait...
Initializing[6226:8A03:8A02]...
CPU: MT6226
chip: 0031:A6C8:A000
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22302200:2BEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x008000 00FEx020000 0004x008000] 32Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
460800
Set baud Done
Identification...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\MModule\backup_security\id.116FB371.[JRD26_06A_PCB01_GPRS_MT6226_S02.MAUI_06A_W06_52_SP1_V17.BIN_6DAFF008].rpl
New firmware detected:
JRD26_06A_PCB01_GPRS_MT6226_S02.MAUI_06A_W06_52_SP1_V17.BIN

- make "Repair security area" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
identification#1 detection finished
device-id: 116FB371
identification#1 protocol ver: 05
ver. sw1: JRD26_06A_PCB01_GPRS_MT6226_S02.MAUI_06A_W06_52_SP1_V17.BIN
ver. sw2: MAUI.06A.W06.52.SP1.V17
ffs offset/size: 01200000/00E00000
detect device identification#2...
detection phase #1...
detect device identification#2 finished
security area#2 calculation...
error: security area#2 can't be calculated
file saved: C:\Program Files\InfinityBox\MModule\backup_system_log_116FB371_JRD26_06A_PCB01_GPRS_MT6226_S02.MAUI_06A_W06_52_SP1_V17.BIN_6DAFF008_20080130-144746.B0X.bin
Finished, time used: 34 sec
Remove/Install battery now !
WARNING ! Settings will be cleared, user data erased, Imei set to default value !
Make flash backup before this procedure !

Do you want to continue ?
COM7 [VCP7] selected
Action: reset settings
Model: Alcatel OT-C701
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200
Initializing[6226:8A03:8A02]...
CPU: MT6226
chip: 0031:A6C8:A000
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E03
Date: 2005.04.12
Version: 1.0
Version: MAUI.06A.W06.52.SP1.V17
Version: JRD26_06A_HW
45 byte(s) read
imei: 35320501429057
connection Ok
building list...
done
items to clear: 322
warning: wrong packet cs
295 of 322 items cleared
building list...
done
27 items remains
Finished, time used: 151 sec
Remove/Install battery now !
COM7 [VCP7] selected
Action: read codes
Model: Alcatel OT-C701
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200
Initializing[6226:8A03:8A02]...
CPU: MT6226
chip: 0031:A6C8:A000
Connecting, wait...
error: can't finalize test mode
repeat operation and HOLD phone "Power" button long time !
error: operation failed !
Finished, time used: 95 sec
Remove/Install battery now !
COM7 [VCP7] selected
Action: read codes
Model: Alcatel OT-C701
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200
Initializing[6226:8A03:8A02]...
CPU: MT6226
chip: 0031:A6C8:A000
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E03
Date: 2005.04.12
Version: 1.0
Version: MAUI.06A.W06.52.SP1.V17
Version: JRD26_06A_HW
45 byte(s) read
imei: 35320501429057
connection Ok
176 byte(s) read
Phone lock: Off
Network lock: Off
Network subset lock: Off
Service provider lock: Off
Corporate lock: Off
IMSI lock: Off
Auto lock: Off
Phone code: 1234
Finished, time used: 11 sec
Remove/Install battery now !

.:ramtelecom:. 01-30-2008 18:50
Quote:
Originally Posted by JC_BY (Post 3052323)
Cool! With last update I could reset counter on C701 and allowed to enter NCK code!
Code:
COM7 [VCP7] selected
Device: Alcatel OT-C701
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: repair security area
Boot...
Press and HOLD Power button now !
Connecting, wait...
Initializing[6226:8A03:8A02]...
CPU: MT6226
chip: 0031:A6C8:A000
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22302200:2BEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x008000 00FEx020000 0004x008000] 32Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
460800
Set baud Done
Identification...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\MModule\backup_security\id.116FB371.[JRD26_06A_PCB01_GPRS_MT6226_S02.MAUI_06A_W06_52_SP1_V17.BIN_6DAFF008].rpl
New firmware detected:
JRD26_06A_PCB01_GPRS_MT6226_S02.MAUI_06A_W06_52_SP1_V17.BIN

- make "Repair security area" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
identification#1 detection finished
device-id: 116FB371
identification#1 protocol ver: 05
ver. sw1: JRD26_06A_PCB01_GPRS_MT6226_S02.MAUI_06A_W06_52_SP1_V17.BIN
ver. sw2: MAUI.06A.W06.52.SP1.V17
ffs offset/size: 01200000/00E00000
detect device identification#2...
detection phase #1...
detect device identification#2 finished
security area#2 calculation...
error: security area#2 can't be calculated
file saved: C:\Program Files\InfinityBox\MModule\backup_system_log_116FB371_JRD26_06A_PCB01_GPRS_MT6226_S02.MAUI_06A_W06_52_SP1_V17.BIN_6DAFF008_20080130-144746.B0X.bin
Finished, time used: 34 sec
Remove/Install battery now !
WARNING ! Settings will be cleared, user data erased, Imei set to default value !
Make flash backup before this procedure !

Do you want to continue ?
COM7 [VCP7] selected
Action: reset settings
Model: Alcatel OT-C701
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200
Initializing[6226:8A03:8A02]...
CPU: MT6226
chip: 0031:A6C8:A000
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E03
Date: 2005.04.12
Version: 1.0
Version: MAUI.06A.W06.52.SP1.V17
Version: JRD26_06A_HW
45 byte(s) read
imei: 35320501429057
connection Ok
building list...
done
items to clear: 322
warning: wrong packet cs
295 of 322 items cleared
building list...
done
27 items remains
Finished, time used: 151 sec
Remove/Install battery now !
COM7 [VCP7] selected
Action: read codes
Model: Alcatel OT-C701
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200
Initializing[6226:8A03:8A02]...
CPU: MT6226
chip: 0031:A6C8:A000
Connecting, wait...
error: can't finalize test mode
repeat operation and HOLD phone "Power" button long time !
error: operation failed !
Finished, time used: 95 sec
Remove/Install battery now !
COM7 [VCP7] selected
Action: read codes
Model: Alcatel OT-C701
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200
Initializing[6226:8A03:8A02]...
CPU: MT6226
chip: 0031:A6C8:A000
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E03
Date: 2005.04.12
Version: 1.0
Version: MAUI.06A.W06.52.SP1.V17
Version: JRD26_06A_HW
45 byte(s) read
imei: 35320501429057
connection Ok
176 byte(s) read
Phone lock: Off
Network lock: Off
Network subset lock: Off
Service provider lock: Off
Corporate lock: Off
IMSI lock: Off
Auto lock: Off
Phone code: 1234
Finished, time used: 11 sec
Remove/Install battery now !
Thanks For Info , Very Good News ;)


All times are GMT +1. The time now is 20:27.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.13058 seconds with 6 queries

SEO by vBSEO