GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 06-22-2009, 08:12   #1 (permalink)
No Life Poster
 
amol_sm's Avatar
 
Join Date: Sep 2006
Posts: 2,929
Member: 343326
Status: Offline
Thanks Meter: 1,463
All Spice New version detected is Here


Hello to all,
I started this thread for Spice Mobile phones new version detected.
So please share here all new detected firmware.

Here is first......
Spice S580
More info is below.
Code:
Brand - Spice
Model - S580
Sw Ver - SPICE_PCB01_GPRS_MT6223_S00.KAA602FM_INA_EN_HI_2_02_A17.BIN
Read detailed info Log....
Code:
COM5 [VCP0] selected
module  v2.82
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: read/check detailed information
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6223:8A05:8A00]...
CPU: MT6223
high speed boot On
chip: 0011:0F7D:000C
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 01227E22212201:29EA0000000000
flash: Amd AMD/Fujitsu std [def 0080x020000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22212201:29EA0000000000
flash: Amd AMD/Fujitsu std [def 0080x020000] 16Mb
detecting chip #02 in region #00...
flash: 01227E22212201:29EA0000000000
flash: Amd AMD/Fujitsu std [def 0080x020000] 16Mb
detecting chip #03 in region #00...
flash: 01227E22212201:29EA0000000000
flash: Amd AMD/Fujitsu std [def 0080x020000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
460800
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: 01227E22212201:29EA0000000000
flash: Amd AMD/Fujitsu std [def 0080x020000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22212201:29EA0000000000
flash: Amd AMD/Fujitsu std [def 0080x020000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\id.5C3A285B.[SPICE_PCB01_GPRS_MT6223_S00.KAA602FM_INA_EN_HI_2_02_A17.BIN_6D8469B7].rpl
====================
New firmware detected (v.2.82, database date: unknown): 
SPICE_PCB01_GPRS_MT6223_S00.KAA602FM_INA_EN_HI_2_02_A17.BIN

This firmware is missing in support area. If this phone is good and working:

- make "Read full flash" operation
- send "system_log_..." file to support: [email protected]
- send flash backup files to support: [email protected]
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
device-id: 5C3A285B
identification#1 protocol ver: 04
ver. sw 1: SPICE_PCB01_GPRS_MT6223_S00.KAA602FM_INA_EN_HI_2_02_A17.BIN
ver. sw 2: KAA602FM_INA_En_Hi_2.02.A17, 48967B92
ffs offset/size: 00900000/00700000
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00900000
flash: 01227E22212201:29EA0000000000
checking area [00000000]: 00000000-00FFFFFF...
ffs/eeprom found near: 009E0000
Detected ffs/eeprom address is non-standard: 009E0000

Posible reasons: 
1. ffs/eeprom is Ok but address is non-standard
2. ffs/eeprom is damaged and can't be detected
3. ffs/eeprom is Ok but detected incorrectly (f.e. unknown ffs/eeprom structure)

If you are not sure that detected address is correct:
1. press "NO" (and select standard address or terminate current operation)
2. make full flash backup for emergency case
3. repeat required operation

Are you sure that detected ffs/eeprom address is correct ?
autodetected ffs/eeprom address confirmed by user: 009E0000
detecting ffs/eeprom size...
ffs/eeprom size: 00620000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:009E0000-00FFFFFF
detecting ffs/eeprom structure pass 1...
.........................
detect standard fat location pass #1...
........................................
detect extended fat location pass #1...
.................................
detect standard fat offset pass #1...
detect standard fat data...
fat layout detection complete
ffs/eeprom detected ok: element #1
detecting ffs/eeprom structure pass 2...
.........................
detect standard fat location pass #1...
........................................
detect extended fat location pass #1...
.................................
detect standard fat offset pass #1...
detect standard fat data...
fat layout detection complete
ffs/eeprom detected ok element #2
Check firmware integrity Done
Check firmware content ...
detecting firmware build...
.................................
firmware build: 200810222047
detecting product-id...
................................................................
done
detecting languages...
..............................
language parameters detected
detected languages: En Hi
Check firmware content Done
Backup required data ...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\SPICE_PCB01_GPRS_MT6223_S00.KAA602FM_INA_EN_HI_2_02_A17__system_log_5C3A285B_6D8469B7_20090621-174109.B0X.bin
Finished, time used: 90 sec
Remove/Install battery now !
Read full flash Log.....
Code:
COM5 [VCP0] selected
module  v2.82
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: read NOR flash
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6223:8A05:8A00]...
CPU: MT6223
high speed boot On
chip: 0011:0F7D:000C
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 01227E22212201:29EA0000000000
flash: Amd AMD/Fujitsu std [def 0080x020000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22212201:29EA0000000000
flash: Amd AMD/Fujitsu std [def 0080x020000] 16Mb
detecting chip #02 in region #00...
flash: 01227E22212201:29EA0000000000
flash: Amd AMD/Fujitsu std [def 0080x020000] 16Mb
detecting chip #03 in region #00...
flash: 01227E22212201:29EA0000000000
flash: Amd AMD/Fujitsu std [def 0080x020000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
460800
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: 01227E22212201:29EA0000000000
flash: Amd AMD/Fujitsu std [def 0080x020000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22212201:29EA0000000000
flash: Amd AMD/Fujitsu std [def 0080x020000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\id.5C3A285B.[SPICE_PCB01_GPRS_MT6223_S00.KAA602FM_INA_EN_HI_2_02_A17.BIN_6D8469B7].rpl
====================
New firmware detected (v.2.82, database date: unknown): 
SPICE_PCB01_GPRS_MT6223_S00.KAA602FM_INA_EN_HI_2_02_A17.BIN

This firmware is missing in support area. If this phone is good and working:

- make "Read full flash" operation
- send "system_log_..." file to support: [email protected]
- send flash backup files to support: [email protected]
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
device-id: 5C3A285B
identification#1 protocol ver: 04
ver. sw 1: SPICE_PCB01_GPRS_MT6223_S00.KAA602FM_INA_EN_HI_2_02_A17.BIN
ver. sw 2: KAA602FM_INA_En_Hi_2.02.A17, 48967B92
ffs offset/size: 00900000/00700000
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00900000
flash: 01227E22212201:29EA0000000000
checking area [00000000]: 00000000-00FFFFFF...
ffs/eeprom found near: 009E0000
Detected ffs/eeprom address is non-standard: 009E0000

Posible reasons: 
1. ffs/eeprom is Ok but address is non-standard
2. ffs/eeprom is damaged and can't be detected
3. ffs/eeprom is Ok but detected incorrectly (f.e. unknown ffs/eeprom structure)

If you are not sure that detected address is correct:
1. press "NO" (and select standard address or terminate current operation)
2. make full flash backup for emergency case
3. repeat required operation

Are you sure that detected ffs/eeprom address is correct ?
autodetected ffs/eeprom address confirmed by user: 009E0000
detecting ffs/eeprom size...
ffs/eeprom size: 00620000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:009E0000-00FFFFFF
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: SPICE_PCB01_GPRS_MT6223_S00.KAA602FM_INA_EN_HI_2_02_A17__fullflash...
file saved: C:\Documents and Settings\Amol\Desktop\SPICE_PCB01_GPRS_MT6223_S00.KAA602FM_INA_EN_HI_2_02_A17__fullflash_20090621-175800.B0M.bin
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\SPICE_PCB01_GPRS_MT6223_S00.KAA602FM_INA_EN_HI_2_02_A17__system_log_5C3A285B_6D8469B7_20090621-175936.B0X.bin
Finished, time used: 1073 sec
Remove/Install battery now !
Full readed flash file is here.....on RapidShare server.
http://rapidshare.com/files/24725802...175800.B0M.bin

File sent to [email protected]
  Reply With Quote
The Following User Says Thank You to amol_sm For This Useful Post:
Old 06-24-2009, 08:28   #2 (permalink)
No Life Poster
 
amol_sm's Avatar
 
Join Date: Sep 2006
Posts: 2,929
Member: 343326
Status: Offline
Thanks Meter: 1,463
Firmware detected on Spice S580

Here is more detailed info....
Code:
Brand - Spice
Model - S580
Sw Ver - SPICE_PCB01_GPRS_MT6223_S00.KAB602FM_INA_EN_HI_2_02_B12.BIN
Here is the read detailed info Log
Code:
COM5 [VCP1] selected
module  v2.82
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: read/check detailed information
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6223:8A05:8A00]...
CPU: MT6223
high speed boot On
chip: 0011:01D9:000C
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 01227E22212201:29EA0000000000
flash: Amd AMD/Fujitsu std [def 0080x020000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22212201:29EA0000000000
flash: Amd AMD/Fujitsu std [def 0080x020000] 16Mb
detecting chip #02 in region #00...
flash: 01227E22212201:29EA0000000000
flash: Amd AMD/Fujitsu std [def 0080x020000] 16Mb
detecting chip #03 in region #00...
flash: 01227E22212201:29EA0000000000
flash: Amd AMD/Fujitsu std [def 0080x020000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
460800
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: 01227E22212201:29EA0000000000
flash: Amd AMD/Fujitsu std [def 0080x020000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22212201:29EA0000000000
flash: Amd AMD/Fujitsu std [def 0080x020000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\id.2972C20B.[SPICE_PCB01_GPRS_MT6223_S00.KAB602FM_INA_EN_HI_2_02_B12.BIN_E0F81189].rpl
====================
New firmware detected (v.2.82, database date: unknown): 
SPICE_PCB01_GPRS_MT6223_S00.KAB602FM_INA_EN_HI_2_02_B12.BIN

This firmware is missing in support area. If this phone is good and working:

- make "Read full flash" operation
- send "system_log_..." file to support: [email protected]
- send flash backup files to support: [email protected]
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
device-id: 2972C20B
identification#1 protocol ver: 04
ver. sw 1: SPICE_PCB01_GPRS_MT6223_S00.KAB602FM_INA_EN_HI_2_02_B12.BIN
ver. sw 2: KAB602FM_INA_En_Hi_2.02.B12, 76EE071F
ffs offset/size: 00900000/00700000
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00900000
flash: 01227E22212201:29EA0000000000
checking area [00000000]: 00000000-00FFFFFF...
ffs/eeprom found near: 009E0000
Detected ffs/eeprom address is non-standard: 009E0000

Posible reasons: 
1. ffs/eeprom is Ok but address is non-standard
2. ffs/eeprom is damaged and can't be detected
3. ffs/eeprom is Ok but detected incorrectly (f.e. unknown ffs/eeprom structure)

If you are not sure that detected address is correct:
1. press "NO" (and select standard address or terminate current operation)
2. make full flash backup for emergency case
3. repeat required operation

Are you sure that detected ffs/eeprom address is correct ?
autodetected ffs/eeprom address confirmed by user: 009E0000
detecting ffs/eeprom size...
ffs/eeprom size: 00620000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:009E0000-00FFFFFF
detecting ffs/eeprom structure pass 1...
.........................
detect standard fat location pass #1...
........................................
detect extended fat location pass #1...
.................................
detect standard fat offset pass #1...
detect standard fat data...
fat layout detection complete
ffs/eeprom detected ok: element #1
detecting ffs/eeprom structure pass 2...
.........................
detect standard fat location pass #1...
........................................
detect extended fat location pass #1...
.................................
detect standard fat offset pass #1...
detect standard fat data...
fat layout detection complete
ffs/eeprom detected ok element #2
Check firmware integrity Done
Check firmware content ...
detecting firmware build...
.................................
firmware build: 200811131826
detecting product-id...
................................................................
done
detecting languages...
...............................
language parameters detected
detected languages: En Hi
Check firmware content Done
Backup required data ...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\SPICE_PCB01_GPRS_MT6223_S00.KAB602FM_INA_EN_HI_2_02_B12__system_log_2972C20B_E0F81189_20090624-120044.B0X.bin
Finished, time used: 94 sec
Remove/Install battery now !
Here is the read full flash Log
Code:
COM5 [VCP1] selected
module  v2.82
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: read NOR flash
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6223:8A05:8A00]...
CPU: MT6223
high speed boot On
chip: 0011:01D9:000C
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 01227E22212201:29EA0000000000
flash: Amd AMD/Fujitsu std [def 0080x020000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22212201:29EA0000000000
flash: Amd AMD/Fujitsu std [def 0080x020000] 16Mb
detecting chip #02 in region #00...
flash: 01227E22212201:29EA0000000000
flash: Amd AMD/Fujitsu std [def 0080x020000] 16Mb
detecting chip #03 in region #00...
flash: 01227E22212201:29EA0000000000
flash: Amd AMD/Fujitsu std [def 0080x020000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
460800
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: 01227E22212201:29EA0000000000
flash: Amd AMD/Fujitsu std [def 0080x020000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22212201:29EA0000000000
flash: Amd AMD/Fujitsu std [def 0080x020000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\id.2972C20B.[SPICE_PCB01_GPRS_MT6223_S00.KAB602FM_INA_EN_HI_2_02_B12.BIN_E0F81189].rpl
====================
New firmware detected (v.2.82, database date: unknown): 
SPICE_PCB01_GPRS_MT6223_S00.KAB602FM_INA_EN_HI_2_02_B12.BIN

This firmware is missing in support area. If this phone is good and working:

- make "Read full flash" operation
- send "system_log_..." file to support: [email protected]
- send flash backup files to support: [email protected]
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
device-id: 2972C20B
identification#1 protocol ver: 04
ver. sw 1: SPICE_PCB01_GPRS_MT6223_S00.KAB602FM_INA_EN_HI_2_02_B12.BIN
ver. sw 2: KAB602FM_INA_En_Hi_2.02.B12, 76EE071F
ffs offset/size: 00900000/00700000
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00900000
flash: 01227E22212201:29EA0000000000
checking area [00000000]: 00000000-00FFFFFF...
ffs/eeprom found near: 009E0000
Detected ffs/eeprom address is non-standard: 009E0000

Posible reasons: 
1. ffs/eeprom is Ok but address is non-standard
2. ffs/eeprom is damaged and can't be detected
3. ffs/eeprom is Ok but detected incorrectly (f.e. unknown ffs/eeprom structure)

If you are not sure that detected address is correct:
1. press "NO" (and select standard address or terminate current operation)
2. make full flash backup for emergency case
3. repeat required operation

Are you sure that detected ffs/eeprom address is correct ?
autodetected ffs/eeprom address confirmed by user: 009E0000
detecting ffs/eeprom size...
ffs/eeprom size: 00620000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:009E0000-00FFFFFF
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: SPICE_PCB01_GPRS_MT6223_S00.KAB602FM_INA_EN_HI_2_02_B12__fullflash...
file saved: C:\Documents and Settings\Amol\Desktop\SPICE_PCB01_GPRS_MT6223_S00.KAB602FM_INA_EN_HI_2_02_B12__fullflash_20090624-121427.B0M.bin
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\SPICE_PCB01_GPRS_MT6223_S00.KAB602FM_INA_EN_HI_2_02_B12__system_log_2972C20B_E0F81189_20090624-121615.B0X.bin
Finished, time used: 813 sec
Remove/Install battery now !
Here is the full read flash file link....http://rapidshare.com/files/24801467...121427.B0M.bin
File sent to [email protected]
  Reply With Quote
The Following User Says Thank You to amol_sm For This Useful Post:
Old 07-01-2009, 13:39   #3 (permalink)
No Life Poster
 
amol_sm's Avatar
 
Join Date: Sep 2006
Posts: 2,929
Member: 343326
Status: Offline
Thanks Meter: 1,463
Hello,
New version detected on 580
Here is the more info as follow......


Read detailed info
Code:
COM5 [VCP0] selected
module  v2.75
Device: Spice-S580
Checking data, wait...
advanced flash detection enabled
Action: read/check detailed information
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6223:8A05:8A00]...
CPU: MT6223
chip: 0011:3305:000C
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 01227E22212201:29EA0000000000
flash: Amd AMD/Fujitsu std [def 0080x020000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud ...
460800
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: C:\Program Files\InfinityBox\MModule\backup_security\id.BFBBEF18.[SPICE_PCB01_GPRS_MT6223_S00.KAA602FM_INA_EN_HI_2_02_A17.BIN_6D8469B7].rpl
====================
New firmware detected (v.2.75, database date: unknown): 
SPICE_PCB01_GPRS_MT6223_S00.KAA602FM_INA_EN_HI_2_02_A17.BIN

This firmware is missing in support area. If this phone is good and working:

- make "Read full flash" operation
- send "system_log_..." file to support: [email protected]
- send flash backup files to support: [email protected]
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
device-id: BFBBEF18
identification#1 protocol ver: 04
ver. sw 1: SPICE_PCB01_GPRS_MT6223_S00.KAA602FM_INA_EN_HI_2_02_A17.BIN
ver. sw 2: KAA602FM_INA_En_Hi_2.02.A17, 48967B92
ffs offset/size: 00900000/00700000
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
sim-lock status: unknown
Check firmware integrity Done
Check firmware content ...
detecting firmware build...
.................................
firmware build: 200810222047
detecting product-id...
................................................................
done
detecting languages...
..............................
language parameters detected
detected languages: En Hi
Check firmware content Done
Backup required data ...
file saved: C:\Program Files\InfinityBox\MModule\backup_security\Spice-S580_SPICE_PCB01_GPRS_MT6223_S00.KAA602FM_INA_EN_HI_2_02_A17__system_log_BFBBEF18_6D8469B7_20090701-170431.B0X.bin
Finished, time used: 43 sec
Remove/Install battery now !
Read full flash Log
Code:
COM5 [VCP0] selected
module  v2.75
Device: Spice-S580
Checking data, wait...
advanced flash detection enabled
Action: read NOR flash
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6223:8A05:8A00]...
CPU: MT6223
chip: 0011:3305:000C
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 01227E22212201:29EA0000000000
flash: Amd AMD/Fujitsu std [def 0080x020000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud ...
460800
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: C:\Program Files\InfinityBox\MModule\backup_security\id.BFBBEF18.[SPICE_PCB01_GPRS_MT6223_S00.KAA602FM_INA_EN_HI_2_02_A17.BIN_6D8469B7].rpl
====================
New firmware detected (v.2.75, database date: unknown): 
SPICE_PCB01_GPRS_MT6223_S00.KAA602FM_INA_EN_HI_2_02_A17.BIN

This firmware is missing in support area. If this phone is good and working:

- make "Read full flash" operation
- send "system_log_..." file to support: [email protected]
- send flash backup files to support: [email protected]
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
device-id: BFBBEF18
identification#1 protocol ver: 04
ver. sw 1: SPICE_PCB01_GPRS_MT6223_S00.KAA602FM_INA_EN_HI_2_02_A17.BIN
ver. sw 2: KAA602FM_INA_En_Hi_2.02.A17, 48967B92
ffs offset/size: 00900000/00700000
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
sim-lock status: unknown
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: Spice-S580_SPICE_PCB01_GPRS_MT6223_S00.KAA602FM_INA_EN_HI_2_02_A17__fullflash_part_1_of_1...
file saved: C:\Documents and Settings\Amol\Desktop\Spice-S580_SPICE_PCB01_GPRS_MT6223_S00.KAA602FM_INA_EN_HI_2_02_A17__fullflash_part_1_of_1_20090701-171733.B0X.bin
file saved: C:\Program Files\InfinityBox\MModule\backup_security\Spice-S580_SPICE_PCB01_GPRS_MT6223_S00.KAA602FM_INA_EN_HI_2_02_A17__system_log_BFBBEF18_6D8469B7_20090701-171807.B0X.bin
Finished, time used: 769 sec
Remove/Install battery now !
File sent to [email protected]
Here is the readed full flash file on RapidShare server....http://rapidshare.com/files/25066791...f_1_20090701-1
  Reply With Quote
The Following User Says Thank You to amol_sm For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
New version detected on China phone is here amol_sm Infinity-Box 108 09-20-2010 21:22
New version detected on China phone is here. hmyeamin Chinese Models & Cloned Phones 11 04-22-2010 08:39
ALFALFATEL H1A new firmwear detected is here Deepakranasaria Infinity-Box 0 09-11-2009 12:38
New version detected on Spice S7 model......But it Say... amol_sm Infinity-Box 19 06-15-2009 16:56
Here is China New version detected . . . amol_sm Infinity-Box 8 05-08-2008 20:12

 



All times are GMT +1. The time now is 11:06.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.24789 seconds with 9 queries

SEO by vBSEO