Moto cdma W200 Dead after unlock Pls' Help - GSM-Forum

utada-hikaru · 01-24-2009, 04:30

I have Motorola W200 with HUTCH Thailand.
I want to Change Sim To CAtCDMA.

I Try to unlock This Phone (W200) with CDMA_DMTOOL_v2.1

And use Cable Panasonic-X60, Motorola-T191 In RJ45 (Infinity)

But My program not have W200 model It's Have W210 A67unlook_TV.hex

It's Work but error 99% not complete

My W200 is dead... Can't power on. not show charging

I have InfinityBox And Try to flash this phone (W200)

with
-w200_Main_HGM.2.0.10.B2M.bin
-w200_LPH_A66_ASIA8_011_En_Thai.B2P.bin
-w200_Flex_FFN_A66_0514_014.B2F.bin

but not connect

COM2 [VCP0] selected
Device: Motorola-W200
Checking data, wait...
connection mode: Standard connection
Action: Flash write
"safe mode" enabled
Write: Firmware
Write: Flex/Customization
Write: Language pack
Skip: FFS/File system
Skip: Eeprom
Connect...
Phone must be Powered-Off
Connecting, wait...
Press and HOLD Power button now !
Connecting, wait...
error: unexpected answer:
error: can't load bootcode
Connect Fail
Finished, time used: 10 sec
Remove/Install battery now !

How to repair this phone

Thank's

**InfinitySupport** · 01-24-2009, 17:53

Hello,

What flash files you have used with DMTOOL flashing ?

utada-hikaru · 01-28-2009, 03:26

I Don't have any flash file with DMTool.

Use InfinityBox Only Can fix this Problem?

Thank's For ryply me .

**InfinitySupport** · 01-28-2009, 08:05

Hello,

If phone was killed with DMTOOL (bootcode erased) there is no any software method to repair this phone, it is need to desolder flash chip and program it with external flash programmer.

01-24-2009, 04:30	#1 (permalink)
utada-hikaru Junior Member Join Date: Sep 2005 Location: ThaiLanD Age: 37 Posts: 21 Member: 184581 Status: Offline Thanks Meter: 0	Moto cdma W200 Dead after unlock Pls' Help I have Motorola W200 with HUTCH Thailand. I want to Change Sim To CAtCDMA. I Try to unlock This Phone (W200) with CDMA_DMTOOL_v2.1 And use Cable Panasonic-X60, Motorola-T191 In RJ45 (Infinity) But My program not have W200 model It's Have W210 A67unlook_TV.hex It's Work but error 99% not complete My W200 is dead... Can't power on. not show charging I have InfinityBox And Try to flash this phone (W200) with -w200_Main_HGM.2.0.10.B2M.bin -w200_LPH_A66_ASIA8_011_En_Thai.B2P.bin -w200_Flex_FFN_A66_0514_014.B2F.bin but not connect COM2 [VCP0] selected Device: Motorola-W200 Checking data, wait... connection mode: Standard connection Action: Flash write "safe mode" enabled Write: Firmware Write: Flex/Customization Write: Language pack Skip: FFS/File system Skip: Eeprom Connect... Phone must be Powered-Off Connecting, wait... Press and HOLD Power button now ! Connecting, wait... error: unexpected answer: error: can't load bootcode Connect Fail Finished, time used: 10 sec Remove/Install battery now ! How to repair this phone Thank's

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Moto C 140 Dead On Unlock,need Help	sartaj	Infinity-Box	9	10-21-2007 06:04
w200 dead after unlock with setool	saeedhex	Cruiser Suite	2	05-31-2007 15:36
Sony Ericsson Z200 dead after unlock need help please	tle2	Sony Ericsson	28	01-03-2007 17:15
C55 dead after UNLOCKS plz help	x4ce	E-Gold Based Phones	3	12-06-2003 15:47
T28 dead after unlocking pleas help	simbirley	Old Ericsson Phones & Sony Phones	10	05-10-2001 18:00

01-24-2009, 17:53	#2 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Hello, What flash files you have used with DMTOOL flashing ?

01-28-2009, 03:26	#3 (permalink)
utada-hikaru Junior Member Join Date: Sep 2005 Location: ThaiLanD Age: 37 Posts: 21 Member: 184581 Status: Offline Thanks Meter: 0	I Don't have any flash file with DMTool. Use InfinityBox Only Can fix this Problem? Thank's For ryply me .

01-28-2009, 08:05	#4 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Hello, If phone was killed with DMTOOL (bootcode erased) there is no any software method to repair this phone, it is need to desolder flash chip and program it with external flash programmer.