calibrate tutch screen 100% ok
 

COM3 [VCP0] selected
module v2.81
Action: touchscreen calibration
mode: 1
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:BC03:3FAE
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: DIJING_ILI9320_OV7660_MIR_BR26_05.27
Version: BR26_05C_HW
detecting structure #2...
done
60 byte(s) read
imei: 13579024681122
warning: current phone imei is incorrect !
It's need to repair imei for correct phone functionality !
connection Ok
detecting structure #5 (mode-1)...
0 1 done
204 byte(s) read
reading data #2...
writing data...
verification...
verification Ok
Finished, time used: 15 sec
Remove/Install battery now !



thankss infinity team








nazmul hossain

nice to see log.
but it should be posted in sticky threzd
http://forum.gsmhosting.com/vbb/showthread.php?t=541620

good work..........
thankss infinity team

Hey,
I don't really know what is wrong with my ininity and pinfinder.
I never succeded to calibrate touchscreen of any chinesse phone . never pass this level...

COM4 [VCP0] selected
module v2.82
Action: touchscreen calibration
mode: 1
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:C141:E5B4
status: FF
Connecting at 19200, wait...






and at the end ........


COM4 [VCP0] selected
module v2.82
Action: touchscreen calibration
mode: 1
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:C141:E5B4
status: FF
Connecting at 19200, wait...
error: can not finalize test mode
repeat operation and HOLD phone "Power" button long time !
error: operation failed !
Finished, time used: 82 sec
Remove/Install battery now !

Can anyone help me ?????///

No doubt infinity is the best device for china mobiles

try 5 modes one by one.

hello!

have you modified your Infinity box for better work with Pinfinder?
there must be Diode shorted. This will dramaticly increase output power.
Missing this power can be reason of mentioned above behavior

hi
 

my dear frind i have the s88 model not calibrated show the log the after touchscreen calibration is ok but after same log show pls hlp me

The same to me
 

please help it's the same to me i can't celebrate any phone
help Infinity help

hello!

post your logs please

i need to know what diode is to be shorted, please uploada picture for demo.

thanks....but I daily removes celebration screen problem with infinity of many sets... with version 8.2

hello!

this information (with pictures) is available in Pinfinder User Manual
http://www.infinity-box.biz/download..._PinFinder.pdf

no picture there just blank white please reload.