can t flash tecno KG5J disconnect an reconnect - Page 2 - GSM-Forum

YellowBoss · 09-29-2022, 22:30

Quote:

Originally Posted by atou

broom error
can t give correct info and can t flashed

have you tried with beta version 2.36?

matengo · 09-30-2022, 06:22

Quote:

Originally Posted by YellowBoss

What is your the same problem friend?
please explain

The phone has admin lock. I have admin unlock file but I can't flash I think it's because the phone is updated to latest version.

atou · 09-30-2022, 11:47

Quote:

Originally Posted by YellowBoss

have you tried with beta version 2.36?

yes check already thx if yu can i am on telegram +22796883952 skype kadilliassou

thx

MrGami · 10-03-2022, 13:52

Quote:

Originally Posted by atou

broom error
can t give correct info and can t flashed

The Problem is that the brom is blocked

InfinityHelp · 10-03-2022, 15:54

@atou
You can post everything here or to Infinity Telegram chat

atou · 10-03-2022, 17:04

Quote:

Originally Posted by MrGami

The Problem is that the brom is blocked

YES i think no solution yet

InfinityHelp · 10-03-2022, 17:42

Quote:

Originally Posted by atou

YES i think no solution yet

Try with this version https://infinity-box.com/?r=100202
and post sw log text

atou · 10-03-2022, 18:17

Quote:

Originally Posted by InfinityHelp

Try with this version https://infinity-box.com/?r=100202
and post sw log text

Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.36
Load IDBase v312457 Ok

Server unavailable
Username or Password is wrong - set it via Settings
https://infinity-box.com/?r=100166

Load IDBase v312457 Ok
Operation : Identify Device [ v2.36 ]

Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode : FLASH
[+] SecureData Backup
[+] AutoBoot
[+] Read Deep Info: PRL, HW, DEBUG
[+] FireFly : AutoEMI
[+] FireFly : FireFly UNI-Proto
[+] Smart Service
Wait...

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM9)
MODE : PRELOADER PORT
PORT : 9
Waiting BOOT ack...
PRELOADER : ACK confirmed
BROM : Init BROM
BROM init passed
CHIP: MT6761 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0200 EVOL: 0x0000 HWC: 0x0717
CODE: Merlot
TYPE: MODERN [RAPHAEL]

BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0xFF|0x03
BROM : PRELOADER PORT
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Looking for suitable BootChain in DA...
AGENT : [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_A llInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA...
BROM : Reset Interface
PTFN : MediaTek PreLoader USB VCOM (Android) (COM9)
MODE : PRELOADER PORT
PORT : 9
Waiting BOOT ack...
PRELOADER : ACK confirmed
BROM : Init BROM
BROM init passed
CHIP: MT6761 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0200 EVOL: 0x0000 HWC: 0x0717
CODE: Merlot
TYPE: MODERN [RAPHAEL]

BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0xFF|0x03
BROM : PRELOADER PORT
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Looking for suitable BootChain in DA...
AGENT : [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_A llInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA...

BROM : 0x00007024 : DA SEND ERROR
ERROR : SECURE BOOT : SELECTED DA NOT SUPPORTED IN CURRENT DEVICE STATE!
INFO : PRELOADER Level : CORRECT DA required : PL/PL_CRYPTO/SWSEC
Retrieve device config...

Try loaders:

1. 0_base/BASE_v2112/MTK_AllInOne_DA.bin

Ok

Error : Fail to init protocol
>>> Remove battery and cable. Check cable/connection/drivers and repeat operation!

Reconnect Power/Cable now

InfinityHelp · 10-04-2022, 15:09

As per given log I can say that this HW was booted well with CM2MT2 earlier.
Probably it was booted with Test Point or with Local SLA option checked. Try it.

atou · 10-04-2022, 19:22

gui: Wide
S/N: 5B933493 v0153
Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.36
Load IDBase v312457 Ok

Server unavailable
Username or Password is wrong - set it via Settings
https://infinity-box.com/?r=100166

Load IDBase v312457 Ok
Operation : Change KG state [ v2.36 ]

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN: MediaTek PreLoader USB VCOM (Android) (COM9)
MODE: PRELOADER PORT
PORT: 9
Waiting BOOT ack...
PRELOADER : ACK confirmed
BROM: Init BROM
BROM init passed
CHIP: MT6761 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0200 EVOL: 0x0000 HWC: 0x0717
CODE: Merlot
TYPE: MODERN [RAPHAEL]

BROM: SecLevel : 0x00000005
BROM: SecMode : SBC+SDA
BROM: BROM|BL : 0xFF|0x03
BROM: PRELOADER PORT
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Looking for suitable BootChain in DA...
AGENT : [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_A llInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA...
BROM : Reset Interface
PTFN: MediaTek PreLoader USB VCOM (Android) (COM9)
MODE: PRELOADER PORT
PORT: 9
Waiting BOOT ack...
PRELOADER : ACK confirmed
BROM: Init BROM
BROM init passed
CHIP: MT6761 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0200 EVOL: 0x0000 HWC: 0x0717
CODE: Merlot
TYPE: MODERN [RAPHAEL]

BROM: SecLevel : 0x00000005
BROM: SecMode : SBC+SDA
BROM: BROM|BL : 0xFF|0x03
BROM: PRELOADER PORT
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Looking for suitable BootChain in DA...
AGENT : [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_A llInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA...

BROM : 0x00007024 : DA SEND ERROR
ERROR : SECURE BOOT : SELECTED DA NOT SUPPORTED IN CURRENT DEVICE STATE!
INFO : PRELOADER Level : CORRECT DA required : PL/PL_CRYPTO/SWSEC
Retrieve device config...

Try loaders:

1. 0_base/BASE_v2112/MTK_AllInOne_DA.bin

Ok

Error : Fail to init protocol
>>> Remove battery and cable. Check cable/connection/drivers and repeat operation!

Reconnect Power/Cable now

Operation : Identify Device [ v2.36 ]

Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: FLASH
[+] SecureData Backup
[+] AutoBoot
[+] Read Deep Info: PRL, HW, DEBUG
[+] FireFly : AutoEMI
[+] FireFly : FireFly UNI-Proto
[+] Smart Service
[-] Local SLA
Wait...

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN: MediaTek PreLoader USB VCOM (Android) (COM9)
MODE: PRELOADER PORT
PORT: 9
Waiting BOOT ack...
PRELOADER : ACK confirmed
BROM: Init BROM
BROM init passed
CHIP: MT6761 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0200 EVOL: 0x0000 HWC: 0x0717
CODE: Merlot
TYPE: MODERN [RAPHAEL]

BROM: SecLevel : 0x00000005
BROM: SecMode : SBC+SDA
BROM: BROM|BL : 0xFF|0x03
BROM: PRELOADER PORT
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Looking for suitable BootChain in DA...
AGENT : [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_A llInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA...
BROM : Reset Interface
PTFN: MediaTek PreLoader USB VCOM (Android) (COM9)
MODE: PRELOADER PORT
PORT: 9
Waiting BOOT ack...
PRELOADER : ACK confirmed
BROM: Init BROM
BROM init passed
CHIP: MT6761 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0200 EVOL: 0x0000 HWC: 0x0717
CODE: Merlot
TYPE: MODERN [RAPHAEL]

BROM: SecLevel : 0x00000005
BROM: SecMode : SBC+SDA
BROM: BROM|BL : 0xFF|0x03
BROM: PRELOADER PORT
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Looking for suitable BootChain in DA...
AGENT : [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_A llInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA...

BROM : 0x00007024 : DA SEND ERROR
ERROR : SECURE BOOT : SELECTED DA NOT SUPPORTED IN CURRENT DEVICE STATE!
INFO : PRELOADER Level : CORRECT DA required : PL/PL_CRYPTO/SWSEC
Retrieve device config...

Try loaders:

1. 0_base/BASE_v2112/MTK_AllInOne_DA.bin

Ok

Error : Fail to init protocol
>>> Remove battery and cable. Check cable/connection/drivers and repeat operation!

Reconnect Power/Cable now

gui: Wide log
gui: Default
gui: Wide
Operation : Identify Device [ v2.36 ]

Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: FLASH
[+] SecureData Backup
[+] AutoBoot
[+] Read Deep Info: PRL, HW, DEBUG
[+] FireFly : AutoEMI
[+] FireFly : FireFly UNI-Proto
[+] Smart Service
[+] Local SLA
Wait...

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection...

PTFN: MediaTek PreLoader USB VCOM (Android) (COM9)
MODE: PRELOADER PORT
PORT: 9
Waiting BOOT ack...
PRELOADER : ACK confirmed
BROM: Init BROM
BROM init passed
CHIP: MT6761 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0200 EVOL: 0x0000 HWC: 0x0717
CODE: Merlot
TYPE: MODERN [RAPHAEL]

BROM: SecLevel : 0x00000005
BROM: SecMode : SBC+SDA
BROM: BROM|BL : 0xFF|0x03
BROM: PRELOADER PORT
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Looking for suitable BootChain in DA...
AGENT : [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_A llInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA...
BROM : Reset Interface
PTFN: MediaTek PreLoader USB VCOM (Android) (COM9)
MODE: PRELOADER PORT
PORT: 9
Waiting BOOT ack...
PRELOADER : ACK confirmed
BROM: Init BROM
BROM init passed
CHIP: MT6761 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0200 EVOL: 0x0000 HWC: 0x0717
CODE: Merlot
TYPE: MODERN [RAPHAEL]

BROM: SecLevel : 0x00000005
BROM: SecMode : SBC+SDA
BROM: BROM|BL : 0xFF|0x03
BROM: PRELOADER PORT
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Looking for suitable BootChain in DA...
AGENT : [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_A llInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA...

BROM : 0x00007024 : DA SEND ERROR
ERROR : SECURE BOOT : SELECTED DA NOT SUPPORTED IN CURRENT DEVICE STATE!
INFO : PRELOADER Level : CORRECT DA required : PL/PL_CRYPTO/SWSEC
Retrieve device config...

Try loaders:

1. 0_base/BASE_v2112/MTK_AllInOne_DA.bin

Ok

Error : Fail to init protocol
>>> Remove battery and cable. Check cable/connection/drivers and repeat operation!

Reconnect Power/Cable now

atou · 10-04-2022, 19:41

https://forum.gsmhosting.com/vbb/f29...nnect-3055868/
the same problem

InfinityHelp · 10-04-2022, 21:30

you may try with test-point
If test-point gives no result it may be some kind of unsupported cpu version

atou · 10-05-2022, 11:06

Quote:

Originally Posted by InfinityHelp

you may try with test-point
If test-point gives no result it may be some kind of unsupported cpu version

no have testpoint
can someone send if have

zishhaider · 10-10-2022, 01:35

Sorry for jumping into old thread. But sadly September patch closed the brom. Only preloader mode available. Techo is closing doors like vivo and oppo. Next is infinix. Going back to old time when oppo was being done remotely.

YellowBoss · 10-14-2022, 09:32

we need sw log text for all models https://infinity-box.com/?r=100202

10-10-2022, 01:35	#29 (permalink)
zishhaider No Life Poster Join Date: Jan 2009 Location: Root tunnel Age: 36 Posts: 2,250 Member: 952111 Status: Offline Sonork: I'm not using now. Thanks Meter: 713	Sorry for jumping into old thread. But sadly September patch closed the brom. Only preloader mode available. Techo is closing doors like vivo and oppo. Next is infinix. Going back to old time when oppo was being done remotely. Last edited by zishhaider; 10-10-2022 at 01:35. Reason: Spelling

10-03-2022, 15:54	#20 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	@atou You can post everything here or to Infinity Telegram chat

10-04-2022, 15:09	#24 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	As per given log I can say that this HW was booted well with CM2MT2 earlier. Probably it was booted with Test Point or with Local SLA option checked. Try it.

10-04-2022, 19:22	#25 (permalink)
atou No Life Poster Join Date: Sep 2010 Posts: 2,173 Member: 1388609 Status: Offline Sonork: atou Thanks Meter: 156	gui: Wide S/N: 5B933493 v0153 Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.36 Load IDBase v312457 Ok Server unavailable Username or Password is wrong - set it via Settings https://infinity-box.com/?r=100166 Load IDBase v312457 Ok Operation : Change KG state [ v2.36 ] 1. Power Off the device 2. Wait 20 seconds 3. Connect USB cable to device Waiting for device connection... PTFN: MediaTek PreLoader USB VCOM (Android) (COM9) MODE: PRELOADER PORT PORT: 9 Waiting BOOT ack... PRELOADER : ACK confirmed BROM: Init BROM BROM init passed CHIP: MT6761 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0200 EVOL: 0x0000 HWC: 0x0717 CODE: Merlot TYPE: MODERN [RAPHAEL] BROM: SecLevel : 0x00000005 BROM: SecMode : SBC+SDA BROM: BROM\|BL : 0xFF\|0x03 BROM: PRELOADER PORT AGENT : 0_base : BASE_v2112 \| Manual : Disabled AGENT : Looking for suitable BootChain in DA... AGENT : [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_A llInOne_DA.bin AGENT : Found MT6761 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA... BROM : Reset Interface PTFN: MediaTek PreLoader USB VCOM (Android) (COM9) MODE: PRELOADER PORT PORT: 9 Waiting BOOT ack... PRELOADER : ACK confirmed BROM: Init BROM BROM init passed CHIP: MT6761 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0200 EVOL: 0x0000 HWC: 0x0717 CODE: Merlot TYPE: MODERN [RAPHAEL] BROM: SecLevel : 0x00000005 BROM: SecMode : SBC+SDA BROM: BROM\|BL : 0xFF\|0x03 BROM: PRELOADER PORT AGENT : 0_base : BASE_v2112 \| Manual : Disabled AGENT : Looking for suitable BootChain in DA... AGENT : [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_A llInOne_DA.bin AGENT : Found MT6761 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA... BROM : 0x00007024 : DA SEND ERROR ERROR : SECURE BOOT : SELECTED DA NOT SUPPORTED IN CURRENT DEVICE STATE! INFO : PRELOADER Level : CORRECT DA required : PL/PL_CRYPTO/SWSEC Retrieve device config... Try loaders: 1. 0_base/BASE_v2112/MTK_AllInOne_DA.bin Ok Error : Fail to init protocol >>> Remove battery and cable. Check cable/connection/drivers and repeat operation! Reconnect Power/Cable now Operation : Identify Device [ v2.36 ] Platform: MTK SmartPhone - MT65/67/68/81/83/87 \| Helio G/P/X Mode: FLASH [+] SecureData Backup [+] AutoBoot [+] Read Deep Info: PRL, HW, DEBUG [+] FireFly : AutoEMI [+] FireFly : FireFly UNI-Proto [+] Smart Service [-] Local SLA Wait... 1. Power Off the device 2. Wait 20 seconds 3. Connect USB cable to device Waiting for device connection... PTFN: MediaTek PreLoader USB VCOM (Android) (COM9) MODE: PRELOADER PORT PORT: 9 Waiting BOOT ack... PRELOADER : ACK confirmed BROM: Init BROM BROM init passed CHIP: MT6761 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0200 EVOL: 0x0000 HWC: 0x0717 CODE: Merlot TYPE: MODERN [RAPHAEL] BROM: SecLevel : 0x00000005 BROM: SecMode : SBC+SDA BROM: BROM\|BL : 0xFF\|0x03 BROM: PRELOADER PORT AGENT : 0_base : BASE_v2112 \| Manual : Disabled AGENT : Looking for suitable BootChain in DA... AGENT : [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_A llInOne_DA.bin AGENT : Found MT6761 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA... BROM : Reset Interface PTFN: MediaTek PreLoader USB VCOM (Android) (COM9) MODE: PRELOADER PORT PORT: 9 Waiting BOOT ack... PRELOADER : ACK confirmed BROM: Init BROM BROM init passed CHIP: MT6761 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0200 EVOL: 0x0000 HWC: 0x0717 CODE: Merlot TYPE: MODERN [RAPHAEL] BROM: SecLevel : 0x00000005 BROM: SecMode : SBC+SDA BROM: BROM\|BL : 0xFF\|0x03 BROM: PRELOADER PORT AGENT : 0_base : BASE_v2112 \| Manual : Disabled AGENT : Looking for suitable BootChain in DA... AGENT : [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_A llInOne_DA.bin AGENT : Found MT6761 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA... BROM : 0x00007024 : DA SEND ERROR ERROR : SECURE BOOT : SELECTED DA NOT SUPPORTED IN CURRENT DEVICE STATE! INFO : PRELOADER Level : CORRECT DA required : PL/PL_CRYPTO/SWSEC Retrieve device config... Try loaders: 1. 0_base/BASE_v2112/MTK_AllInOne_DA.bin Ok Error : Fail to init protocol >>> Remove battery and cable. Check cable/connection/drivers and repeat operation! Reconnect Power/Cable now gui: Wide log gui: Default gui: Wide Operation : Identify Device [ v2.36 ] Platform: MTK SmartPhone - MT65/67/68/81/83/87 \| Helio G/P/X Mode: FLASH [+] SecureData Backup [+] AutoBoot [+] Read Deep Info: PRL, HW, DEBUG [+] FireFly : AutoEMI [+] FireFly : FireFly UNI-Proto [+] Smart Service [+] Local SLA Wait... 1. Power Off the device 2. Wait 20 seconds 3. Connect USB cable to device Waiting for device connection... PTFN: MediaTek PreLoader USB VCOM (Android) (COM9) MODE: PRELOADER PORT PORT: 9 Waiting BOOT ack... PRELOADER : ACK confirmed BROM: Init BROM BROM init passed CHIP: MT6761 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0200 EVOL: 0x0000 HWC: 0x0717 CODE: Merlot TYPE: MODERN [RAPHAEL] BROM: SecLevel : 0x00000005 BROM: SecMode : SBC+SDA BROM: BROM\|BL : 0xFF\|0x03 BROM: PRELOADER PORT AGENT : 0_base : BASE_v2112 \| Manual : Disabled AGENT : Looking for suitable BootChain in DA... AGENT : [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_A llInOne_DA.bin AGENT : Found MT6761 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA... BROM : Reset Interface PTFN: MediaTek PreLoader USB VCOM (Android) (COM9) MODE: PRELOADER PORT PORT: 9 Waiting BOOT ack... PRELOADER : ACK confirmed BROM: Init BROM BROM init passed CHIP: MT6761 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0200 EVOL: 0x0000 HWC: 0x0717 CODE: Merlot TYPE: MODERN [RAPHAEL] BROM: SecLevel : 0x00000005 BROM: SecMode : SBC+SDA BROM: BROM\|BL : 0xFF\|0x03 BROM: PRELOADER PORT AGENT : 0_base : BASE_v2112 \| Manual : Disabled AGENT : Looking for suitable BootChain in DA... AGENT : [0656ff20] C:\InfinityBox\CM2MT2\boot\0_base\BASE_v2112\MTK_A llInOne_DA.bin AGENT : Found MT6761 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA... BROM : 0x00007024 : DA SEND ERROR ERROR : SECURE BOOT : SELECTED DA NOT SUPPORTED IN CURRENT DEVICE STATE! INFO : PRELOADER Level : CORRECT DA required : PL/PL_CRYPTO/SWSEC Retrieve device config... Try loaders: 1. 0_base/BASE_v2112/MTK_AllInOne_DA.bin Ok Error : Fail to init protocol >>> Remove battery and cable. Check cable/connection/drivers and repeat operation! Reconnect Power/Cable now

10-04-2022, 19:41	#26 (permalink)
atou No Life Poster Join Date: Sep 2010 Posts: 2,173 Member: 1388609 Status: Offline Sonork: atou Thanks Meter: 156	https://forum.gsmhosting.com/vbb/f29...nnect-3055868/ the same problem

10-04-2022, 21:30	#27 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	you may try with test-point If test-point gives no result it may be some kind of unsupported cpu version

10-14-2022, 09:32	#30 (permalink)
YellowBoss Product Supporter Join Date: Jun 2009 Location: private Posts: 36,475 Member: 1043909 Status: Offline Thanks Meter: 60,926	we need sw log text for all models https://infinity-box.com/?r=100202