Cect Q380 supported? - GSM-Forum

lix_DAVAO · 02-06-2009, 01:59

unit is Cect Q380 with Spreadtrum CPU SC6600D5-180G cannot be detected by Pinfinder. I think because it's not in the list of supported cpu.

pls support this unit this is common unit already

TIA

InfinityHelp · 02-06-2009, 11:57

hello!

did you select SPD processor type in pinfinder?

lix_DAVAO · 02-07-2009, 02:03

yes sir many times tried. is my box a problem? it can detect other cpu type especially MTK but not yet ever success in SPD.

lix_DAVAO · 02-07-2009, 02:12

pinfinder log

software version: 1.17
cable type: 1x18 (L18A)
platform: SPD: Spreadtrum SC6600M, SC6600R
searching adapter at COM3...
adapter found, version: 2000
pins: 18, plain
power cycles: 1
activation cycles: 10
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now (not required but recommended) !
detecting pins...
failed to detect pins
time required: 26 sec
Power Off !
Set parameter to value 20 (or more) and repeat operation (parameter "Finder activation tries")

InfinityHelp · 02-07-2009, 12:02

hello!

does phone is able to be powered On from box power?

bochot_2009 · 02-12-2009, 10:39

can anyone know how to repair keypad failure??? pls help me.......

02-06-2009, 01:59	#1 (permalink)
lix_DAVAO Freak Poster Join Date: May 2005 Age: 45 Posts: 441 Member: 144091 Status: Offline Thanks Meter: 73	Cect Q380 supported? unit is Cect Q380 with Spreadtrum CPU SC6600D5-180G cannot be detected by Pinfinder. I think because it's not in the list of supported cpu. pls support this unit this is common unit already TIA

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cect Q380 Pinout	EMOTION BBSR	Infinity-Box	15	09-26-2008 05:49
Urgent need pinout for Iphone cect Q380	vpriya	Infinity-Box	14	05-14-2008 16:30
i need pinout of cect q380	shripalkawdia	Infinity-Box	11	03-13-2008 18:29
cect Q380 pin out	kamalakar	Infinity-Box	3	01-09-2008 16:01
pin out cect Q380	rajus	Infinity-Box	1	11-26-2007 19:07

02-06-2009, 11:57	#2 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! did you select SPD processor type in pinfinder?

02-07-2009, 02:03	#3 (permalink)
lix_DAVAO Freak Poster Join Date: May 2005 Age: 45 Posts: 441 Member: 144091 Status: Offline Thanks Meter: 73	yes sir many times tried. is my box a problem? it can detect other cpu type especially MTK but not yet ever success in SPD.

02-07-2009, 02:12	#4 (permalink)
lix_DAVAO Freak Poster Join Date: May 2005 Age: 45 Posts: 441 Member: 144091 Status: Offline Thanks Meter: 73	pinfinder log software version: 1.17 cable type: 1x18 (L18A) platform: SPD: Spreadtrum SC6600M, SC6600R searching adapter at COM3... adapter found, version: 2000 pins: 18, plain power cycles: 1 activation cycles: 10 power-off delay: 20 start Rx/Tx: 1/1 Loading configuration... Initializing... Press and HOLD phone Power button now (not required but recommended) ! detecting pins... failed to detect pins time required: 26 sec Power Off ! Set parameter to value 20 (or more) and repeat operation (parameter "Finder activation tries")

02-07-2009, 12:02	#5 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! does phone is able to be powered On from box power?

02-12-2009, 10:39	#6 (permalink)
bochot_2009 Junior Member Join Date: Feb 2009 Posts: 28 Member: 969769 Status: Offline Thanks Meter: 3	can anyone know how to repair keypad failure??? pls help me.......