GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   Infinity-Box (https://forum.gsmhosting.com/vbb/f296/)
-   -   cect t999 pinout ok. rebuild error (https://forum.gsmhosting.com/vbb/f296/cect-t999-pinout-ok-rebuild-error-515849/)

sancakaziz 03-21-2008 17:03
cect t999 pinout ok. rebuild error
 
hii rebuild mode3 erorrr
Quote:
COM25 [VCP2] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: imei
imei write method: mode-3
new imei: 353***********
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6205:8B00]...
CPU: MT6205
high speed boot enabled
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
detecting chip #01 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
detecting chip #02 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
detecting chip #03 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
detecting chip #04 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
detecting chip #05 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
detecting chip #06 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
detecting chip #07 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
number of flash chip/regions detected: 08/01
Initialize Done
Set baud...
921600
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
detecting chip #01 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 00400000
detect device identification#1...
detection phase #1...
.
detection phase #2...
.................................................. .................................................. ............................
warning: identification#1 information not found, possible reasons:
.old firmware type w/o identification#1 data
.damaged firmware
.damaged hardware
if phone works fine just ignore this warning
detect device identification#1 finished
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset assigned: 00380000
flash: 01227E221A2201:18E59F00000000
checking area[00000000]: 00000000-003FFFFF...
eeprom/ffs found near: 00380000
detecting eeprom/ffs size...
eeprom/ffs size: 00080000
ffs chip: 00
eeprom/ffs area: 00000000:00380000-003FFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [eeprom]...
warning: wrong data size at 0x003BD800, retry...
warning: wrong data size at 0x003BD800, retry...
warning: wrong data size at 0x003BD800, retry...
warning: wrong data size at 0x003BD800, retry...
warning: wrong data size at 0x003BD800, retry...
warning: wrong data size at 0x003BD800, retry...
warning: wrong data size at 0x003BD800, retry...
warning: wrong data size at 0x003BD800, retry...
warning: wrong data size at 0x003BD800, retry...
error: too many retries during read operation
Probably errors exist during flash read operation.
Do you want to repeat read operation ?
operation canceled by user
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_eeprom_200 80321-175819.B0E.bin
error: wrong answer: BB
error: no any expected answer: wrong answer after chip id request
error: wrong answer: BB
error: wrong answer: BB
error: no any expected answer: wrong answer after chip cfi request
error: wrong answer: BB
error: no any expected answer: wrong answer after chip id request
Backup required data Done
Patch required data...
2 step(s) required to finalize
Patch required data Done
Special operation...
Special operation Done
Write...
error: wrong answer: BB
error: no any expected answer: wrong answer after chip id request
error: wrong answer: BB
error: wrong answer: BB
error: no any expected answer: wrong answer after chip cfi request
error: wrong answer: BB
error: no any expected answer: wrong answer after chip id request
Write Fail
Finished, time used: 145 sec
Remove/Install battery now !

InfinitySupport 03-21-2008 17:32
Hello,

You must use not 921600 but 115200 baud !

sancakaziz 03-25-2008 16:59
1 Attachment(s)
help me please imei rebuild error
Quote:
COM25 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: imei
imei write method: mode-3
new imei: 350448011234561
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6205:8B00]...
CPU: MT6205
high speed boot enabled
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
detecting chip #01 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
detecting chip #02 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
detecting chip #03 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
detecting chip #04 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
detecting chip #05 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
detecting chip #06 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
detecting chip #07 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
number of flash chip/regions detected: 08/01
Initialize Done
Set baud...
460800
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
detecting chip #01 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 00400000
detect device identification#1...
detection phase #1...
.
detection phase #2...
.................................................. .................................................. ............................
warning: identification#1 information not found, possible reasons:
.old firmware type w/o identification#1 data
.damaged firmware
.damaged hardware
if phone works fine just ignore this warning
detect device identification#1 finished
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset assigned: 00380000
flash: 01227E221A2201:18E59F00000000
checking area[00000000]: 00000000-003FFFFF...
eeprom/ffs found near: 00380000
detecting eeprom/ffs size...
eeprom/ffs size: 00080000
ffs chip: 00
eeprom/ffs area: 00000000:00380000-003FFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [eeprom]...
warning: wrong data size at 0x003D9000, retry...
warning: wrong data size at 0x003D9000, retry...
warning: wrong data size at 0x003D9000, retry...
warning: wrong data size at 0x003D9000, retry...
warning: wrong data size at 0x003D9000, retry...
warning: wrong data size at 0x003D9000, retry...
warning: wrong data size at 0x003D9000, retry...
warning: wrong data size at 0x003D9000, retry...
warning: wrong data size at 0x003D9000, retry...
error: too many retries during read operation
Probably errors exist during flash read operation.
Do you want to repeat read operation ?
error: wrong answer: 3B
Probably errors exist during flash read operation.
Do you want to repeat read operation ?
error: wrong answer: C3
Probably errors exist during flash read operation.
Do you want to repeat read operation ?
operation canceled by user
error: wrong answer: 3B
error: no any expected answer: wrong answer after chip id request
error: wrong answer: 3B
error: wrong answer: C3
error: no any expected answer: wrong answer after chip cfi request
error: wrong answer: 3B
error: no any expected answer: wrong answer after chip id request
Backup required data Done
Patch required data...
imei is not detected !
What to do:
1. Power-On phone
2. wait 20-30 sec
3. Power-Off by "Power" button, don't remove battery !
4. Repeat "imei repair" procedure again
If imei can't be detected:
1. make "complete" ffs format
2. Power-On phone
3. wait 20-30 sec
4. Power-Off by "Power" button, don't remove battery !
5. Repeat "imei repair" procedure again
If imei can't be detected: read flash and send to support: [email protected]
Patch required data Fail
Finished, time used: 141 sec
Remove/Install battery now !

sancakaziz 03-25-2008 17:25
detail information phone

Quote:
COM25 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: read/check detailed information
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6205:8B00]...
CPU: MT6205
high speed boot enabled
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
detecting chip #01 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
detecting chip #02 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
detecting chip #03 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
detecting chip #04 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
detecting chip #05 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
detecting chip #06 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
detecting chip #07 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
number of flash chip/regions detected: 08/01
Initialize Done
Set baud...
921600
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
detecting chip #01 in region #00...
flash: 01227E221A2201:18E59F00000000
flash: Amd AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 00400000
detect device identification#1...
detection phase #1...
.
detection phase #2...
.................................................. .................................................. ............................
warning: identification#1 information not found, possible reasons:
.old firmware type w/o identification#1 data
.damaged firmware
.damaged hardware
if phone works fine just ignore this warning
detect device identification#1 finished
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset assigned: 00380000
flash: 01227E221A2201:18E59F00000000
checking area[00000000]: 00000000-003FFFFF...
eeprom/ffs found near: 00380000
detecting eeprom/ffs size...
eeprom/ffs size: 00080000
ffs chip: 00
eeprom/ffs area: 00000000:00380000-003FFFFF
detecting ffs structure pass 1...
.........
detect standard fat location pass #1...
.........
detect standard fat offset pass #1...
detect standard fat data...
fat layout detection complete
ffs element #1 detected ok
detecting ffs structure pass 2...
.........
detect standard fat location pass #1...
.........
detect standard fat offset pass #1...
detect standard fat data...
fat layout detection complete
ffs element #2 detected ok
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
Finished, time used: 49 sec
Remove/Install battery now !

InfinityHelp 03-25-2008 22:10
hello!

and what gives method-1, method-2?

GSMSAMI 03-27-2008 22:45
please pinout cect t999

iduo success 04-06-2009 12:04
pin out cect-t999
ceck------tx=11,rx=10. or reverse
enjoy!

valiu 04-17-2009 09:40
and second procesor pinout??

InfinityHelp 04-18-2009 20:17
Quote:
Originally Posted by valiu (Post 4363417)
and second procesor pinout??
hello!

i can teach how to test second CPU pinout with multimeter.

.::sravan::. 05-18-2009 20:09
hi
 
cect-t999 flash file pls give me any one

.::sravan::. 05-19-2009 08:35
pls any one hlp me urgent

InfinityHelp 05-19-2009 21:08
Quote:
Originally Posted by sravankumar2009 (Post 4481498)
pls any one hlp me urgent
hello!

please make "read detailed information" and post here your phone version.
only after this we can advice flash file

unlockfahim 08-25-2010 09:45
cect-t999 flash file mtk 6205 please any body give me

InfinityHelp 08-26-2010 09:27
Quote:
Originally Posted by unlockfahim (Post 6251855)
cect-t999 flash file mtk 6205 please any body give me
hello!

can you post here required software version read in "read detailed information" mode ?


All times are GMT +1. The time now is 17:53.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.17322 seconds with 6 queries

SEO by vBSEO