china nktel a200 problem plz help
 

dear infinity team i have china nktel a200 model phone with dull disply mean disply is poor and its 100% software prob. i flash it with same phones flash file but that time result is white disply what can i do there is not suppoorded flash file in support area.

phones orignal flash file-KCM25_GEMINI_PCB01_GPRS_MT6225_S00.K7_PBLCD_GC0316 _T19_V2_0.BIN
i flash with this file-flash[N66_ABROAD_PCB01_GPRS_MT6225_S00.N66_ABROAD_2ADGB_ S5LCD_V1_2_9.BIN]_20090412-004314.B0M

here is orignal phone in fomation---number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
====================
New firmware detected (v.2.78, database date: 04.03.2009):
KCM25_GEMINI_PCB01_GPRS_MT6225_S00.K7_PBLCD_GC0316 _T19_V2_0.BIN
This firmware is missing in support area. If this phone is good and working:
- make "Read full flash" operation
- send flash backup files to support: [email protected]
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
identification#1 protocol ver: 04
ver. sw 1: KCM25_GEMINI_PCB01_GPRS_MT6225_S00.K7_PBLCD_GC0316 _T19_V2_0.BIN
ver. sw 2: k7_PbLCD_GC0316_T19_V2.0, 00000000
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00E00000
flash: 98000300000000:18E59F00000000
checking area [00000000]: 00000000-00FFFFFF...
ffs/eeprom found near: 00E00000
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
detecting ffs/eeprom structure pass 1...
......................
detect standard fat location pass #1...
..................................................
detect standard fat offset pass #1...
detect standard fat data...
fat layout detection complete
ffs/eeprom detected ok: element #1
detecting ffs/eeprom structure pass 2...
......................
detect standard fat location pass #1...
..................................................
detect standard fat offset pass #1...
detect standard fat data...
fat layout detection complete
ffs/eeprom detected ok element #2
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
Finished, time used: 64 sec
Remove/Install battery now !


plz guide me or suggest perfect flash file.



thanks.

hello!

as you can see- both versions are different.
they do not match, that is why you have LCD problems.
Only original flash file will bring your phone back to life.
unfortuantely, we dont have such flash file in our collection
if you could find same working phone - reading flash backup and writing to dead phone would solve problem

thanks for support i tried to find good working phone .



plz. close thread.

charge proplem??????????????????????????????????

china nktel a200 problem not detect pinfinder every tell me it is supported pinfinder this model without open phone detect i want to conect pinfinder cable it posible can every body help me spicialy shakir hashmi...........plz

hello!

first of all: when you connect power crocodiles to battery terminals do you able to power On phone from box power? or at least make it blink?