GSM-Forum - Chinese Miracle-2 MTK/Mediatek v1.40

GSM-Forum (https://forum.gsmhosting.com/vbb/)

- Infinity-Box (https://forum.gsmhosting.com/vbb/f296/)

- - Chinese Miracle-2 MTK/Mediatek v1.40 - New Repair and Test features (https://forum.gsmhosting.com/vbb/f296/chinese-miracle-2-mtk-mediatek-v1-40-new-repair-test-features-2028355/)

Quote:

Originally Posted by sanyomobile (Post 11495803)

Code:

Start at : [12/23/2015 / 1:35:44 AM]

Operation : Flash [ v1.40 ]
 

======= Flash

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey
 

Wait for phone...

Phone found! [ 8 ]

Sync...

Inital regs read done

Boot Info :

BB_CPU_ID : 6572

BB_CPU_HW : CA01

BB_CPU_SW : 8A00

BB_CPU_SB : 0000

BB_CPU_NM : [MediaTek] MT6572_S00

Processing BROM stage

BLVersion : 0x01

SecCfgVal : 0x00000000

BromVersion : 0xFF

BLVersion : 0x01

Preloader Status : Alive

Processing DA stage

DA Select done , sending

DA Ver : MTK_AllInOne_DA_v5.1540.01.01

NAND_ID : 00000000000000000000000000000000

eMMC_ID : 90014A4834473164040301A5B111A08F

DA Stat : v4.2 on BBID : 0x88

DA Sent. Configure setting now ...

DA started successuflly

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0090 , OEM : 014A

[eMMC] : FLASH_INF : [HYNIX] , d1G4

[eMMC] : FLASH_CID : 90014A4834473164040301A5B111A08F

[eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00400000

[eMMC] : FLASH_LEN : 0x00000000E9000000

[eMMC] : FLASH_UCP : 3728 MiB

INT RAM : 0x00020000

EXT RAM : 0x20000000

BOOT TYPE : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!
 

ScatCFG : BaseBand : MT6572 , Project : huaqin72_we_iba_jb3 , Storage : EMMC

Setting : Flash Pre-Erase (Safe) : Enabled

Setting : AFF verify : Enabled

Setting : HW verify : Enabled
 

BL : Check HW compatibility

BL : BBID supported by BootLoader!

BL : Check eMMC compatibility

BL : eMMC supported by BootLoader!
 

BL : BatteryLevel : 3942 mV

BL : BatteryLevel Ok
 

BL : Flash Pre-Erase

Total blocks to Erase : 2

Erase : 0x0000000000C00000-0x0000000000100000

Erase : 0x0000000002900000-0x00000000E5E00000

Flash Pre-Erase Done, time used : 00:00:11
 

SecCfg Passed , 1799

BMT remark not need. Will skip

Sending Preloader ...

Use : preloader_huaqin72_we_iba_jb3.bin

Preloader Sent , Init passed

SecCfg Passed , 1799

PartCount : 0013

Update PMT by user request

Repartition Done!
 

Processing : Flash Write

Flash now : MBR

Image Flash Ok

Flash now : EBR1

Write Error , code 0x000! Something went wrong!
 

Operation Failed

Elapsed: 00:00:45

same problem

I have no idea about problem. I spend a lot of my time to test near 60+ different mobiles with full cycles of erase and write, reflashing and etc - all is working. Can't spend more time for nothing. There is 2 users, which face problem from all rest - you need check problem on PC side first.

fake update again. make it serious infinity team

Quote:

Originally Posted by ekel (Post 11495723)

normal oppo r831k reading flash error

log:

Code:

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey
 

Wait for phone...

Phone found! [ 10 ]

Sync...

Inital regs read done

Boot Info :

BB_CPU_ID : 6572

BB_CPU_HW : CA01

BB_CPU_SW : 8A00

BB_CPU_SB : 0000

BB_CPU_NM : [MediaTek] MT6572_S00

Processing BROM stage

BLVersion : 0xFE

SecCfgVal : 0x00000000

BromVersion : 0x05

BLVersion : 0xFE

Preloader Status : Not active (Erased)

Processing DA stage

DA Select done , sending

DA Ver : MTK_AllInOne_DA_v5.1540.01.01

NAND_ID : 00000000000000000000000000000000

eMMC_ID : 90014A4834473164040503A25B8AA16B

DA Stat : v4.2 on BBID : 0x88

DRAM not initialized , configure DRAM Settings

DRAM EmiReq Ok , 0x00A8

DRAM Init Ok , 0x20000000

DA Sent. Configure setting now ...

DA started successuflly

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0090 , OEM : 014A

[eMMC] : FLASH_INF : [HYNIX] , d1G4

[eMMC] : FLASH_CID : 90014A4834473164040503A25B8AA16B

[eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00400000

[eMMC] : FLASH_LEN : 0x00000000E9000000

[eMMC] : FLASH_UCP : 3728 MiB

INT RAM : 0x00020000

EXT RAM : 0x20000000

BOOT TYPE : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!
 

Reading Flash Conent now ...

USBDL : Error init HSUSB!!!
 

Operation Failed

Elapsed: 00.00.24

Reconnect Power/Cable!

Check your drivers. Problem on them.
BTW - oppo phones completely supported without need of holding any bootkeys.

Quote:

Originally Posted by juliusorbiso (Post 11495858)

fake update again. make it serious infinity team

Serious? Put your comment in your as*shole , and check more about yourself here.
For such very kind comment without any reason and proof - you can forget about Infinirty support forever. As well - I reccomend in future not run new versions.

Quote:

Originally Posted by .::Asad::. (Post 11495707)

what about SPD mobile antivirus

It is good tradition - ask about completely different things in not-related to this threads?

Quote:

Originally Posted by juliusorbiso (Post 11495858)

fake update again. make it serious infinity team

Hello,
What do you mean by fake update again? could you clarify your problem? Or just wasting forum space with useless posts.

Br.
Infinity Box Support Team.

Huawei y511 u30 flashing error

Code:

Operation : Flash [ v1.40 ]
 

======= Flash

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey
 

Wait for phone...

Phone found! [ 10 ]

Sync...

Inital regs read done

Boot Info : 

BB_CPU_ID : 6572

BB_CPU_HW : CA01

BB_CPU_SW : 8A00

BB_CPU_SB : 0000

BB_CPU_NM : [MediaTek] MT6572_S00

Processing BROM stage

BLVersion : 0x01

SecCfgVal : 0x00000000

BromVersion : 0xFF

BLVersion : 0x01

Preloader Status : Alive

Processing DA stage

DA Select done , sending 

DA Ver : MTK_AllInOne_DA_v5.1540.01.01

NAND_ID : 00000000000000000000000000000000

eMMC_ID : 1501004E4A5330304D006C5B1D7AC07F

DA Stat : v4.2 on BBID : 0x88

DA Sent. Configure setting now ... 

DA started successuflly

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0015 , OEM : 0100

[eMMC] : FLASH_INF : [SAMSUNG] , M00SJ

[eMMC] : FLASH_CID : 1501004E4A5330304D006C5B1D7AC07F

[eMMC] : FLASH_EXT : 0x00100000 , 0x00100000 , 0x00020000

[eMMC] : FLASH_LEN : 0x00000000E9000000

[eMMC] : FLASH_UCP : 3728 MiB

INT RAM    : 0x00020000

EXT RAM    : 0x20000000

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!
 

ScatCFG : BaseBand : MT6572 , Project : wt98511 , Storage : EMMC

Setting : Flash Pre-Erase (Safe) : Enabled

Setting : AFF verify :  Enabled

Setting : HW verify :  Enabled
 

BL : Check HW compatibility

BL : BBID supported by BootLoader!

BL : Check eMMC compatibility

BL : eMMC supported by BootLoader!
 

BL : BatteryLevel : 3845 mV

BL : BatteryLevel Ok
 

BL : Flash Pre-Erase

Total blocks to Erase : 2

Erase : 0x0000000000600000-0x0000000000100000

Erase : 0x0000000002300000-0x0000000094840000

Flash Pre-Erase Done, time used : 00:00:06
 

SecCfg Passed , 1799

BMT remark not need. Will skip

Sending Preloader ... 

Use : preloader_wt98511.bin

Preloader Sent , Init passed

SecCfg Passed , 1799

PartCount : 0013

Update PMT by user request

Repartition Done!
 

Processing : Flash Write

Flash now : MBR

Image Flash Ok

Flash now : EBR1

Image Flash Ok

Flash now : UBOOT

Image Flash Ok

Flash now : BOOTIMG

Image Flash Ok

Flash now : RECOVERY

Image Flash Ok

Flash now : SEC_RO

Image Flash Ok

Flash now : LOGO

Image Flash Ok

Flash now : ANDROID

Image Flash Ok

Flash now : CACHE

Image Flash Ok

Flash now : USRDATA

Image Flash Ok

Flash Write Done, time used : 00:01:49
 

Processing : Verify

Verify Passed : MBR

Verify Passed : EBR1

Verify Passed : UBOOT

Verify Error! Something went wrong!

ErrCode : 0x06A5
 

Operation Failed

Elapsed: 00:02:10

Reconnect Power/Cable!

Quote:

Originally Posted by abdulhaq_majroh (Post 11495136)

hello team add stop button on software

Stop button in setting menu

Sent from my SM-E700H using Tapatalk

plz add spd6820 cpu PLZ

@unlockworld, try few more samples. If there will be problems again in "Verify" - let me know. We will test then all on your PC.

Quote:

Originally Posted by JayDi (Post 11496322)

@unlockworld, try few more samples. If there will be problems again in "Verify" - let me know. We will test then all on your PC.

sir costmer come my shop very urgently and said need this phone ok at 20 minuts , i tell ok i do , i try first cm2 but fail, sacond i try with flash tool, 100% flash ok and phone good working , before this phone show lot of errors , then costmer gone,
and sorry to say this time i not have this phone,
i post log because i already flash this model 2 or 3 time cm2 old software 1.37 or 1.38 , and this time not show any error, but this version 1.40 error
thanks

Quote:

Originally Posted by unlockworld (Post 11496347)

I made much changes inside SW 1.39 and next versions, so, there is can be some minor problems. With users reports - I can find such problems very fast and fix them.

Hello,
any news about MTK 6276 ? :confused:

Quote:

Originally Posted by syed tuqeer (Post 11496538)

Hello,
any news about MTK 6276 ? :confused:

Hello.
If need very fast - can try make basic - Identify, Format FS, Repair Security.
Read-Write will take some time.

Quote:

Originally Posted by JayDi (Post 11495862)

Check your drivers. Problem on them.
BTW - oppo phones completely supported without need of holding any bootkeys.

can u give me link for oppo driver sir?

thanks for u`re support