Chinese Miracle-2 MTK/Mediatek v1.41 - New way MTK Servicing - Unlock/Security etc - Page 13 - GSM-Forum

Tariqaziz1984 · 02-28-2016, 06:31

i tries to format many sets but fails 1.41
but 1.40 was ok

Quote:

Originally Posted by byteforce

New bug found in 1.41 while in 1.40 doesn't exist:
Same phone just exe differs.

1.41 bug

Code:

========================= Start ========================= 
                 2016-02-25 / 19:10:22
========================================================= 
Card found : S/N : 79596BC6 , v0130
Chinese Miracle II  [MTK module] v 1.41

Start  at : [2016-02-25 / 19:10:48]
Operation : Format FileSystem [ v1.41 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 30 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 45010053454D3034473A53E5F0BC71F7
Initialize Memory ... 
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x45 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , G40ME
[eMMC] : FLASH_CID : 45010053454D3034473A53E5F0BC71F7
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID    : D104F935308DA077E893B4874CA06F17
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear USERDATA
Format/Reset Error!

Operation Failed
Elapsed: 00:00:30
Reconnect Power/Cable!

Finish at : [2016-02-25 / 19:11:19]

Start  at : [2016-02-25 / 19:11:29]
Operation : Format FileSystem [ v1.41 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 30 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 45010053454D3034473A53E5F0BC71F7
Initialize Memory ... 
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x45 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , G40ME
[eMMC] : FLASH_CID : 45010053454D3034473A53E5F0BC71F7
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID    : D104F935308DA077E893B4874CA06F17
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear USERDATA
Format/Reset Error!

Operation Failed
Elapsed: 00:00:14
Reconnect Power/Cable!

Finish at : [2016-02-25 / 19:11:43]

1.40 OK

Code:

Card found : S/N : 79596BC6 , v0130
Chinese Miracle II  [MTK module] v 1.40

Operation : Format FileSystem [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 30 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6582
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 45010053454D3034473A53E5F0BC71F7
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0045 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , G40ME
[eMMC] : FLASH_CID : 45010053454D3034473A53E5F0BC71F7
[eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!

Done!
Elapsed: 00:00:17
Reconnect Power/Cable!


Operation : Format FileSystem [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 30 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6582
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 45010053454D3034473A53E5F0BC71F7
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0045 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , G40ME
[eMMC] : FLASH_CID : 45010053454D3034473A53E5F0BC71F7
[eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!

Done!
Elapsed: 00:00:16
Reconnect Power/Cable!

alamgir80 · 02-28-2016, 15:53

Operation : Read Flash

Code:

Operation : Read Flash [ v1.41 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 65 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 150100513758534142014E67E612C17B
Initialize Memory ... 
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BASX7
[eMMC] : FLASH_CID : 150100513758534142014E67E612C17B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 22D116439052E4684FE32EB906508A1D
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ... 

Brand     : Walton
ProdName  : Primo_GM
ProdModel : Primo_GM
Device    : Primo_GM
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.11

[Read Ok] : preloader_techain82_wet_kk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / techain82_wet_kk / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1083 MiB
Scatter saved to : E:\All Flash file\Android\China\Walton\MT6582__Walton__Primo_GM__Primo_GM__4.4.2__ALPS.KK1.MP1.V2.11\

All done!

Done!
Elapsed: 00.04.52
Reconnect Power/Cable!

Operation : Scan APPs

Code:

Operation : Scan APPs [DDirect] [ v1.41 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 65 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 150100513758534142014E67E612C17B
Initialize Memory ... 
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BASX7
[eMMC] : FLASH_CID : 150100513758534142014E67E612C17B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 22D116439052E4684FE32EB906508A1D
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

DDirect : Init Ok!
Scanning FileSystem now , please wait
[User Select] : Remove Files and Garbage

[DDCleaner Info] : Files to remove : 0
[DDCleaner Info] : Additional garbage detected : 0
Removing files ...
[DDCleaner] : Removed 0

Special Op #1 : Clear Recovery Data Ok!
Special Op #3 : PostFix Ok!
All Done!


Done!
Elapsed: 00.01.06
Reconnect Power/Cable!

PRINCE ACE · 02-29-2016, 11:24

my dongle dont have sp direct unlock

only NAND EMMC

HOW CAN I ACTIVATE MY DONGLE FOR MTK UNLOCKING

JayDi · 02-29-2016, 11:43

Enough select SP : Auto.
Unlock will be available in security tab.

naveedsialkoti · 03-01-2016, 09:38

Q MOBILE X 90 IMEI REPAIR DONE

Steve-1 · 03-01-2016, 21:17

read flash error in first time and in second time ok , pleas fix it

herbergeur d image

masterRt1994 · 03-01-2016, 21:29

Quote:

Originally Posted by Steve-1

read flash error in first time and in second time ok , pleas fix it

herbergeur d image

Your Antivirus Problem.

br

masterRt1994

Steve-1 · 03-01-2016, 21:42

Quote:

Originally Posted by masterRt1994

Your Antivirus Problem.

br

masterRt1994

i already make it exclusion

image gratuite à télécharger

what i do again

JayDi · 03-02-2016, 06:55

Add whole Infinit-Box folder with all subdirs.

Steve-1 · 03-02-2016, 10:05

Quote:

Originally Posted by JayDi

Add whole Infinit-Box folder with all subdirs.

Bro see in my picture already do it

Regards

JayDi · 03-02-2016, 11:36

Quote:

Originally Posted by Steve-1

Bro see in my picture already do it

Regards

Then I have no idea, what to do more.

Steve-1 · 03-02-2016, 11:47

I hope will be fixed in next update

Regards

naveedsialkoti · 03-02-2016, 14:50

FIRST READ FLASH A GOOD WORKING MOBILE
OPPO R1001 HANG ON LOGO SOLVED WITH SIMPLY FLASH

wrecker01 · 03-02-2016, 23:57

Card found : S/N : 86D55A4D , v0130
Chinese Miracle II [MTK module] v 1.41

Operation : Repair Security [ v1.41 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 12 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01
Sending and initialize DA ...

[DA_ERROR] : SECURITY_BOOT_NOT_ACCEPTED
Boot Error!

Operation Failed
Elapsed: 00:00:33
Reconnect Power/Cable!

InfinityHelp · 03-04-2016, 00:58

New version released - http://forum.gsmhosting.com/vbb/f296...fixes-2060693/

03-02-2016, 23:57	#194 (permalink)
wrecker01 Insane Poster Join Date: Aug 2005 Location: Venezuela Age: 45 Posts: 88 Member: 168650 Status: Offline Thanks Meter: 5	[da_error] : Security_boot_not_accepted Card found : S/N : 86D55A4D , v0130 Chinese Miracle II [MTK module] v 1.41 Operation : Repair Security [ v1.41 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 12 ] Sync... Inital Boot Ok! BB_CPU_PID : 6582 BB_CPU_NME : [MediaTek] MT6582_S00 BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x00000000 BromVer : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : NORMAL with SPRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01 Sending and initialize DA ... [DA_ERROR] : SECURITY_BOOT_NOT_ACCEPTED Boot Error! Operation Failed Elapsed: 00:00:33 Reconnect Power/Cable!

02-29-2016, 11:24	#183 (permalink)
PRINCE ACE Crazy Poster Join Date: Aug 2010 Posts: 50 Member: 1362603 Status: Offline Sonork: prince Thanks Meter: 5	my dongle dont have sp direct unlock only NAND EMMC HOW CAN I ACTIVATE MY DONGLE FOR MTK UNLOCKING

02-29-2016, 11:43	#184 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	Enough select SP : Auto. Unlock will be available in security tab.

03-01-2016, 09:38	#185 (permalink)
naveedsialkoti No Life Poster Join Date: Apr 2015 Location: FLORENCE ITALY Posts: 751 Member: 2375239 Status: Offline Sonork: 100.1662985 Thanks Meter: 962	Q MOBILE X 90 IMEI REPAIR DONE

03-01-2016, 21:17	#186 (permalink)
Steve-1 No Life Poster Join Date: Dec 2015 Location: hossting Posts: 1,152 Member: 2501288 Status: Offline Thanks Meter: 328	read flash error in first time and in second time ok , pleas fix it herbergeur d image

03-02-2016, 06:55	#189 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	Add whole Infinit-Box folder with all subdirs.

03-02-2016, 11:47	#192 (permalink)
Steve-1 No Life Poster Join Date: Dec 2015 Location: hossting Posts: 1,152 Member: 2501288 Status: Offline Thanks Meter: 328	I hope will be fixed in next update Regards

03-02-2016, 14:50	#193 (permalink)
naveedsialkoti No Life Poster Join Date: Apr 2015 Location: FLORENCE ITALY Posts: 751 Member: 2375239 Status: Offline Sonork: 100.1662985 Thanks Meter: 962	FIRST READ FLASH A GOOD WORKING MOBILE OPPO R1001 HANG ON LOGO SOLVED WITH SIMPLY FLASH

03-04-2016, 00:58	#195 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	New version released - http://forum.gsmhosting.com/vbb/f296...fixes-2060693/