Chinese Miracle-2 SPD/Spreadtrum v1.04 - New SPD Repair and Extra Features - GSM-Forum

InfinityHelp · 09-09-2015, 15:24

Infinity-Box/Dongle Chinese Miracle-2 SPD/Spreadtrum v1.04 - New SPD Repair and Extra Features

Spreadtrum SC7715, SC7730, SC7731, SC5735, SC8830 with eMMC
Spreadtrum SC7715, SC8830 with NAND

New operations supported:
- Repair Security in FlashMode (allow low-level security repair) - WorldFirst !
*Allow fix phone security ( IMEI 1/2/3/4 ) in FlashMode

- Repair FS during "Format FS" (auto, if need)* - WorldFirst !
*Fix hang/stuck/bootloop and damaged after 3rd party tools

- Clear DIN data * - WorldFirst !
*Clear temporary phone settings and calibrations WITHOUT UserData lost !

Improvements:
- NV operations revised completely
NV Reading revised: Full NV data reading, checking and clear
NV Writing revised: Full NV data writing, clear and repair
NV writing also fix now all kind of network issues (software-related only)
NV writing also fix now "CFT calibrate" issue
NV writing also fix now "Unknown BaseBand" issue (software-related only)
TDMA phones (SC883x) support fixed

- Flash Engine updated
PAC file handling revised
Flash writing improved

- Check/Info revised
Shows extended phone info
Detect extra infromation (Dynamic HW Info check)

- Repair Security improved
Repair Security in "SVC" mode revised

- Some other bugfixes and improvements

Other:
FlashID database updated
Some bugfixes and improvements in FP Platform
Some other bugfixes and improvements at all

Official Download link

Infinity-Box 10 (ten) years (2005 - 2015) non-stop regular updates and support as nobody else - Infinity-Box - News

Unlock Codes (Huawei, SE, Motorola, Samsung etc.), iPhone Unlock, Software Activations - Infinity-Box Online Service

1. Infinity-Box Dongle ready for delivery
2. BB5 Easy Service Tool [BEST] Dongle
3. CDMA-Tool Dongle (fast and easy unlock)

Twitter Facebook

Are you programmer with experience in GSM/CDMA ?
Do you want to work with us ?
Contact to [email protected]

PASSIONATE_BOYS · 09-09-2015, 15:43

Videocon Vphone Grande read user code, Firmware and Format done-
Read user code-

Code:

Operation : Read User Code [ v1.04 ]

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

 ====  Wait for phone...

Phone found! [ 24 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ... 
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00EF 0060 0017 0000
[0] Flash VEN : Winbond , W25Q64
[0] Flash CAP : 00800000
Check data... Can take some time

User Code : 2015

Done!

Elapsed: 00:00:14

Reconnect Power/Cable!

Read Firmware-

Code:

Operation : Read FullFlash [ v1.04 ]

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

 ====  Wait for phone...

Phone found! [ 24 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ... 
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00EF 0060 0017 0000
[0] Flash VEN : Winbond , W25Q64
[0] Flash CAP : 00800000
Read Flash Content
Read Ok , collect info
Project  : SC6531_OPENPHONE
HWInfo   : SC6531_OPENPHONE
Compile  : 06-05-2014 17:07:30
Set FileInfo : 
Model Vendor : Videocon
Model Name   : Vphone grande
ExtInfo Data : English
Saved to : C:\InfinityBox\CM2SPD\Read_out\SPD6531_00800000_06052014170730_English__Videocon-Vphone grande_2.bin
Done!

Elapsed: 00:01:05

Reconnect Power/Cable!

Safe Format-

Code:

Operation : Format File System [ v1.04 ]
Settings : SmartFormat is On

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

 ====  Wait for phone...

Phone found! [ 24 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ... 
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00EF 0060 0017 0000
[0] Flash VEN : Winbond , W25Q64
[0] Flash CAP : 00800000
Verify data... Can take some time
Init Ok, formatting DIN area ... 
Format Block Done!
Done!

Elapsed: 00:00:18

Reconnect Power/Cable!

JayDi · 09-09-2015, 16:01

SC7731 , repair Security in FlashMode :

Code:

Operation : Repair Security [ v1.04 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7730/SC7731 loader eMMC v1.0 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ... 
Detected eMMC Flash , Structure detect Ok!

Write new security data : 
IMEI1 : 099467655556762
IMEI2 : 099433486666782

Step #1 Ok
Step #2 Ok
Step #3 Ok

Write done!
Elapsed: 00:00:26

Reconnect Power/Cable!

JayDi · 09-09-2015, 16:03

SC7731 , new NVRAM read/write mode.

Code:

Operation : Read NV [ v1.04 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7730/SC7731 loader eMMC v1.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Detected eMMC Flash , Structure detect Ok!

Read NVM Part #1
Part Ok
Read NVM Part #2
Part Ok
Saved to : C:\InfinityBox\CM2SPD\phdata\backup\CX7731_FLYIQ4505_SPDNV.spdnv

Elapsed: 00:00:55

Reconnect Power/Cable!

Code:

Operation : Write NV [ v1.04 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7730/SC7731 loader eMMC v1.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
GSM Phone detected!

Write NVM Part #1 Ok!
Write NVM Part #2 Ok!
Write NVM Part #3 Ok!
Write NVM Part #4 Ok!

Clean DYNV
Clean DYNV Done!

Elapsed: 00:00:14

JayDi · 09-09-2015, 16:06

Read Extended Info :

Code:

Operation : Check/Read Info [ v1.04 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7730/SC7731 loader eMMC v1.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info ... 
Model Name  : FlyIQ4505
Model Brand : Fly
Model Device: IQ4505_Quad
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA
CompileDate : 1421754194
Project Ver : SW10_FLY_IQ4505 Quad_2015_01_20
Model Ext   : IQ4505 Quad

ExtraInfo : HWInfo not exists, normal phone
ExtraInfo : GSM Phone

Elapsed: 00:00:22

Reconnect Power/Cable!

Another one example, where need be VERY accurate :

Code:

Operation : Check/Read Info [ v1.04 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 71 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7730/SC7731 loader eMMC v1.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info ... 
Model Name  : Q324
Model Brand : Micromax
Model Device: Q324
AndrVersion : 4.4.3
BaseBand CPU: SP7731GEA
CompileDate : 1421379188
Project Ver : MMX_Q324_SW_1.2.4_HW_4.0.0_20150117
Model Ext   : Micromax Q324

ExtraInfo : HWInfo exists!!! This phone have DYNAMIC HW settings!!!
ExtraInfo : GSM Phone

Elapsed: 00:00:22

Reconnect Power/Cable!

JayDi · 09-09-2015, 16:09

NAND phones Repair Security in FlashMode.
Yes, it work with ALL phones

Code:

Operation : Repair Security [ v1.04 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7715 Generic Loader NAND v1.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ... 
Detected NAND Flash , Structure detect Ok!

Write new security data : 
IMEI1 : 099644312778340
IMEI2 : 099644312778357

Step #1 Ok
Step #2 Ok
Step #3 Ok

Write done!
Elapsed: 00:00:17

Reconnect Power/Cable!

Mr Bikash · 09-09-2015, 16:16

What is 'Din data'?
Plz explain..

yurais · 09-09-2015, 16:22

Excellent update !

I have a sc7715, brand/model NIGA, it is Network Locked, will there be any chance cm2spd will SP Unlock these phones?

please consider making an NVRAM Database in support area, and consider this for MTK phones also.

Also would be good to have a preloaders database for MTK.

JayDi · 09-09-2015, 16:34

Quote:

Originally Posted by yurais

Excellent update !

I have a sc7715, brand/model NIGA, it is Network Locked, will there be any chance cm2spd will SP Unlock these phones?

please consider making an NVRAM Database in support area, and consider this for MTK phones also.

Also would be good to have a preloaders database for MTK.

Hello.
Yes, I can unlock SC7715 phones (emmc at now, not have nand samples).
If you want help me - PM me with ReadInfo/Check log and NVM readout from this phone. Will check it and think about unlock.

About DB - yes, need start collect it. We work on that too.

Quote:

Originally Posted by Mr Bikash

What is 'Din data'?
Plz explain..

DIN - I call by this work temporary settings, which phone use on it work. Damage them may cause network problems, reboots , bootloop.. Now SPD module can reset them without need of flashing.

shoaibrao · 09-09-2015, 16:51

@JayDi
Sir Will You Help Us For SPD 8810/6820 CPUs?

kasykasy · 09-09-2015, 17:11

hello to you infinity service !
when will suport : spd6820/8810 and SPD7710 and 7710G ?
when will suport SP UNLOCK of many phone spd :SPD 6531 ,6530,6820....

i have phone SPD SC7701B : need suport this cpu
i have phone SPD SC6531 (not original phone) : need SP UNLOCK (it block only with one sim)

my friend will go TO CHINA and need to give to you all phone !
can you TAKE ALL PHONE PLEASE?
GIVE ME YOUR NUMBER PHONE AND YOUR CONTRY AND CITY IF POSIBLE!

JayDi · 09-09-2015, 17:19

Quote:

Originally Posted by shoaibrao

@JayDi
Sir Will You Help Us For SPD 8810/6820 CPUs?

Hello. Yes, sure. Very soon

JayDi · 09-09-2015, 17:23

Quote:

Originally Posted by kasykasy

hello to you infinity service !
when will suport : spd6820/8810 and SPD7710 and 7710G ?
when will suport SP UNLOCK of many phone spd :SPD 6531 ,6530,6820....

i have phone SPD SC7701B : need suport this cpu
i have phone SPD SC6531 (not original phone) : need SP UNLOCK (it block only with one sim)

my friend will go TO CHINA and need to give to you all phone !
can you TAKE ALL PHONE PLEASE?
GIVE ME YOUR NUMBER PHONE AND YOUR CONTRY AND CITY IF POSIBLE!

Hello.
If you want help us with SP locked samples - that would be great.
If you want help us with different SC770x and SC880x samples - that would be great.

Contact details and rest - pm me your skype/icq and we can discuss about all of that.

hitech care · 09-09-2015, 19:06

Better If Read Flash Also Given As Now Days China Market Expend We Don't Having All Model Factory For Service Phones... I Know Ur Solution Is Safe Risk Free But We Can't Take Risk & Customers Are Not Agree @ Dead Risk We Can't Bare PCB Price If Firmware Not Available... In Some Case Handset Came With Hang On Logo User Area Damage By Other By Using Other Tool Not Possible To Repair All Without File With Format Or Repair User Area So Kindly Add ASAP.

Anyways Good Update Keep It Up

thaquiattari · 09-09-2015, 19:12

Please Add old spd cpu's like 6820, 6825, 8825 etc...

09-09-2015, 15:24	#1 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	Chinese Miracle-2 SPD/Spreadtrum v1.04 - New SPD Repair and Extra Features Infinity-Box/Dongle Chinese Miracle-2 SPD/Spreadtrum v1.04 - New SPD Repair and Extra Features Spreadtrum SC7715, SC7730, SC7731, SC5735, SC8830 with eMMC Spreadtrum SC7715, SC8830 with NAND New operations supported: - Repair Security in FlashMode (allow low-level security repair) - WorldFirst ! Allow fix phone security ( IMEI 1/2/3/4 ) in FlashMode - Repair FS during "Format FS" (auto, if need) - WorldFirst ! Fix hang/stuck/bootloop and damaged after 3rd party tools - Clear DIN data - WorldFirst ! Clear temporary phone settings and calibrations WITHOUT UserData lost ! Improvements: - NV operations revised completely NV Reading revised: Full NV data reading, checking and clear NV Writing revised: Full NV data writing, clear and repair NV writing also fix now all kind of network issues (software-related only) NV writing also fix now "CFT calibrate" issue NV writing also fix now "Unknown BaseBand" issue (software-related only) TDMA phones (SC883x) support fixed - Flash Engine updated PAC file handling revised Flash writing improved - Check/Info revised Shows extended phone info Detect extra infromation (Dynamic HW Info check) - Repair Security improved Repair Security in "SVC" mode revised - Some other bugfixes and improvements Other: FlashID database updated Some bugfixes and improvements in FP Platform Some other bugfixes and improvements at all Official Download link* Infinity-Box 10 (ten) years (2005 - 2015) non-stop regular updates and support as nobody else - Infinity-Box - News Unlock Codes (Huawei, SE, Motorola, Samsung etc.), iPhone Unlock, Software Activations - Infinity-Box Online Service 1. Infinity-Box Dongle ready for delivery 2. BB5 Easy Service Tool [BEST] Dongle 3. CDMA-Tool Dongle (fast and easy unlock) Twitter Facebook Are you programmer with experience in GSM/CDMA ? Do you want to work with us ? Contact to [email protected] Last edited by InfinitySupport; 09-09-2015 at 18:32.

09-09-2015, 16:16	#7 (permalink)
Mr Bikash Freak Poster Join Date: Dec 2014 Location: GSM Forum Age: 29 Posts: 155 Member: 2316752 Status: Offline Thanks Meter: 37	What is 'Din data'? Plz explain..

09-09-2015, 16:22	#8 (permalink)
yurais No Life Poster Join Date: Jan 2006 Location: Santiago de Cuba Age: 46 Posts: 3,672 Member: 220595 Status: Offline Thanks Meter: 355	Excellent update ! I have a sc7715, brand/model NIGA, it is Network Locked, will there be any chance cm2spd will SP Unlock these phones? please consider making an NVRAM Database in support area, and consider this for MTK phones also. Also would be good to have a preloaders database for MTK.

09-09-2015, 16:51	#10 (permalink)
shoaibrao No Life Poster Join Date: Dec 2006 Location: GSM WORLD Posts: 3,295 Member: 412843 Status: Offline Sonork: 100.1604902 Thanks Meter: 497	@JayDi Sir Will You Help Us For SPD 8810/6820 CPUs?

09-09-2015, 17:11	#11 (permalink)
kasykasy Insane Poster Join Date: May 2015 Posts: 88 Member: 2393670 Status: Offline Thanks Meter: 14	hello to you infinity service ! when will suport : spd6820/8810 and SPD7710 and 7710G ? when will suport SP UNLOCK of many phone spd :SPD 6531 ,6530,6820.... i have phone SPD SC7701B : need suport this cpu i have phone SPD SC6531 (not original phone) : need SP UNLOCK (it block only with one sim) my friend will go TO CHINA and need to give to you all phone ! can you TAKE ALL PHONE PLEASE? GIVE ME YOUR NUMBER PHONE AND YOUR CONTRY AND CITY IF POSIBLE!

09-09-2015, 19:06	#14 (permalink)
hitech care No Life Poster Join Date: Nov 2012 Location: Ek India Happy Wala.. :-) Posts: 2,828 Member: 1834832 Status: Offline Thanks Meter: 1,450	Better If Read Flash Also Given As Now Days China Market Expend We Don't Having All Model Factory For Service Phones... I Know Ur Solution Is Safe Risk Free But We Can't Take Risk & Customers Are Not Agree @ Dead Risk We Can't Bare PCB Price If Firmware Not Available... In Some Case Handset Came With Hang On Logo User Area Damage By Other By Using Other Tool Not Possible To Repair All Without File With Format Or Repair User Area So Kindly Add ASAP. Anyways Good Update Keep It Up

09-09-2015, 19:12	#15 (permalink)
thaquiattari Freak Poster Join Date: Jun 2011 Posts: 170 Member: 1603029 Status: Offline Thanks Meter: 20	Please Add old spd cpu's like 6820, 6825, 8825 etc...