Cm2 Flashing Problem - GSM-Forum

arsikhanarsi · 02-23-2017, 09:40

Qmobile m95 flashing problem
phone was working before flashing..some apps were crashed..i flash the phone with research downloader
but problem was same.then i erase phone with cm2.
Now i am trying to flash the phone with cm2 it gives error..

NOW WHEN I TRY TO FLASH WITH REASERCH DOWNLOADER I GIVES REPARTETION ERROR

I TRIED THIS TRICK BUT SAME ERROR ON FDL2

PASSIONATE_BOYS · 02-23-2017, 14:18

Hello,
Seems FlashIC problem, did you made FlashIC Test?
Also can try with other firmware rev.

Br.
Infinity Box Team.

arsikhanarsi · 02-25-2017, 07:53

Quote:

Originally Posted by PASSIONATE_BOYS

Hello,
Seems FlashIC problem, did you made FlashIC Test?
Also can try with other firmware rev.

Br.
Infinity Box Team.

phone was working well before erase..and i also flash the phone before erase
but the problem was same.Then i decide to erase and now my phone is dead.

Flash ic test info is here
==== Wait for phone...

Phone found! [ 24 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ...
Unknown structure detected! Something went wrong

If phone work normally - check correct selection (Model,FlashType)!

Elapsed: 00:00:19

Reconnect Power/Cable!

.::EXTREME::. · 02-25-2017, 08:09

PMT update fails shows usually if eMMC damaged ....
and your eMMC test log shows all........

Quote:

Checking Structure ...
Unknown structure detected! Something went wrong
If phone work normally - check correct selection (Model,FlashType)!

an indication of the existence you reported in first post....

Quote:

phone was working before flashing..some apps were crashed..

abes3146 · 02-25-2017, 12:43

Quote:

Originally Posted by arsikhanarsi

phone was working well before erase..and i also flash the phone before erase
but the problem was same.Then i decide to erase and now my phone is dead.

Flash ic test info is here
==== Wait for phone...

Phone found! [ 24 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ...
Unknown structure detected! Something went wrong

If phone work normally - check correct selection (Model,FlashType)!

Elapsed: 00:00:19

Reconnect Power/Cable!

The Computer Still Detect The phone After He dies ?

abes3146 · 02-25-2017, 12:44

Try With Another Firmware

arsikhanarsi · 02-26-2017, 06:41

Quote:

Originally Posted by abes3146

Try With Another Firmware

same problem with another firmware..

mananjary · 09-17-2020, 06:35

same problem for me!

==================

Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Unknown structure detected! Something went wrong

If phone work normally - check correct selection (Model,FlashType)!

Elapsed: 00:00:25

========================================
Any one have this firm please:::

Device info :
Patch Level : MRA58K
Display ID : J022-CRO1-J5--V01-20191115
Ver. Incmt : root-103233
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2016-07-01
Build Time : 15.11.2019
Product Brand : Qnet
Product Name : sp7731g_1h10_hd_oversea
Product Device : sp7731g_1h10
Product Board : sp7731gea_hdr
Product Manfct : Beldar
Board Platform : sc8830
Product Info : sp7731g_1h10
Product Model : CRO1

Thank in advance

02-23-2017, 09:40	#1 (permalink)
arsikhanarsi Freak Poster Join Date: Jan 2015 Location: manshera,Pakistan Posts: 231 Member: 2330556 Status: Offline Thanks Meter: 79	Cm2 Flashing Problem Qmobile m95 flashing problem phone was working before flashing..some apps were crashed..i flash the phone with research downloader but problem was same.then i erase phone with cm2. Now i am trying to flash the phone with cm2 it gives error.. NOW WHEN I TRY TO FLASH WITH REASERCH DOWNLOADER I GIVES REPARTETION ERROR I TRIED THIS TRICK BUT SAME ERROR ON FDL2 Last edited by arsikhanarsi; 02-23-2017 at 09:47.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-23-2017, 14:18	#2 (permalink)
PASSIONATE_BOYS No Life Poster Join Date: Jul 2007 Location: Infinity-Box Support- Posts: 9,321 Member: 541591 Status: Offline Sonork: 100.1611509 Thanks Meter: 7,361	Hello, Seems FlashIC problem, did you made FlashIC Test? Also can try with other firmware rev. Br. Infinity Box Team.

02-25-2017, 12:44	#6 (permalink)
abes3146 Insane Poster Join Date: May 2016 Posts: 98 Member: 2573221 Status: Offline Thanks Meter: 11	Try With Another Firmware

09-17-2020, 06:35	#8 (permalink)
mananjary Insane Poster Join Date: Apr 2020 Location: Mananjary Posts: 63 Member: 2955238 Status: Offline Thanks Meter: 6	same problem for me! ================== Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC773x Android 5.x eMMC v1.0 Inf Sending FLASH FDL FLASH FDL Ready! Boot Ok! FlashMode Set : Ok! Unknown structure detected! Something went wrong If phone work normally - check correct selection (Model,FlashType)! Elapsed: 00:00:25 ======================================== Any one have this firm please::: Device info : Patch Level : MRA58K Display ID : J022-CRO1-J5--V01-20191115 Ver. Incmt : root-103233 Ver. CodeName : REL Ver. Release : 6.0 Sec. Patch : 2016-07-01 Build Time : 15.11.2019 Product Brand : Qnet Product Name : sp7731g_1h10_hd_oversea Product Device : sp7731g_1h10 Product Board : sp7731gea_hdr Product Manfct : Beldar Board Platform : sc8830 Product Info : sp7731g_1h10 Product Model : CRO1 Thank in advance