Cm2 Spd Read Error - GSM-Forum

snarkykills · 02-22-2020, 14:49

Card found : 1D01B60A , v0139
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.04

Load IDBase v1119 Ok!

Operation : Identify [ v2.04 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731GEA_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
ProtoEx : : TRCC not supported!
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : MRA58K
Display ID : M112-Mars20-G-20191121-V03
Ver. Incmt : root-103233
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2016-07-01
Build Time : 1574326945
Product Brand : Qnet
Product Name : sp7731g_1h10_32v4_oversea
Product Device : sp7731g_1h10_32v4
Product Board : sp7731gea
Product Manfct : Mars20
Board Platform : sc8830
Product Info : sp7731g_1h10_32v4
Product Model : Mars20

Platform Version: MOCORTM_14B_MP_7731G_W17.22.4_Debug
Project Version: sc7731g_CP0_modem
BASE Version: TM_BASE_W17.22.4
MMI Version: sc7731g_modem
HW Version: sc7731g_CP0_modem
CMP_Time : 05-31-2017 21:23:59

MODEM TAG : MOCORTM_14B_MP_7731G_W17.22.4_Debug_TM_BASE_W17.22 .4_sc7731g_CP0_modem_sc7731g_CP0_modem_sc7731g_mod em

UserData : STATE : PLAIN

Done!
Elapsed: 00:00:57

Operation : Read FW [ v2.04 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731GEA_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
ProtoEx : : TRCC not supported!
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : MRA58K
Display ID : M112-Mars20-G-20191121-V03
Ver. Incmt : root-103233
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2016-07-01
Build Time : 1574326945
Product Brand : Qnet
Product Name : sp7731g_1h10_32v4_oversea
Product Device : sp7731g_1h10_32v4
Product Board : sp7731gea
Product Manfct : Mars20
Board Platform : sc8830
Product Info : sp7731g_1h10_32v4
Product Model : Mars20

AndroidVer : 6
VlnrLevel : 0x01

SC8830__Mars20__Mars20__6.0__M112-Mars20-G-20191121-V03__MRA58K__sp7731g_1h10_32v4

Read : prodnv.img
ExtSparse : Compression ratio : 9%
Read : phase.cfg
Read : wmodem.bin
Read : wdsp.bin
Read : wnvitem.bin
Read : modem_wcn.img
Read : wcnnvitem.bin
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Read : logo2.bin
Read : logo3.bin
Read : logo4.bin
Read : logo5.bin
Read : boot.img
Read : system.img
ExtSparse : Compression ratio : 88%
Make : persist.img
Read : sysinfo.bin
ExtSparse : Compression ratio : 4%
Make : cache.img
Read : recovery.img
Make : userdata.img
Fail to readout data from device!
ERROR : 0000008E:9300003000000000

Error : Failed to read data! Unexpected end of data!
Check cable, connection and drivers!

Reconnect Power/Cable!

Parahat · 10-06-2020, 06:06

I had same problem with this model.
Make : userdata. img
Fail to readout data from device!
ERROR : 0000008E:9300003000000000

Arslanmayo · 10-06-2020, 06:14

Quote:

Originally Posted by Parahat

I had same problem with this model.
Make : userdata. img
Fail to readout data from device!
ERROR : 0000008E:9300003000000000

ue latest spd module and post results

Parahat · 11-07-2020, 05:44

Tried both 2.06 and 2.08 CM2SP2 with/without "Force Read" option. Same result.

02-22-2020, 14:49	#1 (permalink)
snarkykills Crazy Poster Join Date: Feb 2011 Location: Underground Posts: 56 Member: 1526349 Status: Offline Sonork: 100.1644754 Thanks Meter: 4	Cm2 Spd Read Error Card found : 1D01B60A , v0139 Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.04 Load IDBase v1119 Ok! Operation : Identify [ v2.04 ] BootMode : FLASH 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! BootVersion : SPRD3 Boot : INF : 0_SC7731x_BASE : SC7731GEA_eMMC_1GB_NS Sending Init Boot ... Boot sent! Kick FDL ... BootVersion : Spreadtrum Boot Block version 1.1 Protocol setup ... Port speed : 921600 Sending Flash Boot ... Boot sent! Kick FLASH FDL ... ProtoEx : : TRCC not supported! FDL : Control transfered! Boot Done! Device info : Patch Level : MRA58K Display ID : M112-Mars20-G-20191121-V03 Ver. Incmt : root-103233 Ver. CodeName : REL Ver. Release : 6.0 Sec. Patch : 2016-07-01 Build Time : 1574326945 Product Brand : Qnet Product Name : sp7731g_1h10_32v4_oversea Product Device : sp7731g_1h10_32v4 Product Board : sp7731gea Product Manfct : Mars20 Board Platform : sc8830 Product Info : sp7731g_1h10_32v4 Product Model : Mars20 Platform Version: MOCORTM_14B_MP_7731G_W17.22.4_Debug Project Version: sc7731g_CP0_modem BASE Version: TM_BASE_W17.22.4 MMI Version: sc7731g_modem HW Version: sc7731g_CP0_modem CMP_Time : 05-31-2017 21:23:59 MODEM TAG : MOCORTM_14B_MP_7731G_W17.22.4_Debug_TM_BASE_W17.22 .4_sc7731g_CP0_modem_sc7731g_CP0_modem_sc7731g_mod em UserData : STATE : PLAIN Done! Elapsed: 00:00:57 Operation : Read FW [ v2.04 ] 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! BootVersion : SPRD3 Boot : INF : 0_SC7731x_BASE : SC7731GEA_eMMC_1GB_NS Sending Init Boot ... Boot sent! Kick FDL ... BootVersion : Spreadtrum Boot Block version 1.1 Protocol setup ... Port speed : 921600 Sending Flash Boot ... Boot sent! Kick FLASH FDL ... ProtoEx : : TRCC not supported! FDL : Control transfered! Boot Done! Device info : Patch Level : MRA58K Display ID : M112-Mars20-G-20191121-V03 Ver. Incmt : root-103233 Ver. CodeName : REL Ver. Release : 6.0 Sec. Patch : 2016-07-01 Build Time : 1574326945 Product Brand : Qnet Product Name : sp7731g_1h10_32v4_oversea Product Device : sp7731g_1h10_32v4 Product Board : sp7731gea Product Manfct : Mars20 Board Platform : sc8830 Product Info : sp7731g_1h10_32v4 Product Model : Mars20 AndroidVer : 6 VlnrLevel : 0x01 SC8830__Mars20__Mars20__6.0__M112-Mars20-G-20191121-V03__MRA58K__sp7731g_1h10_32v4 Read : prodnv.img ExtSparse : Compression ratio : 9% Read : phase.cfg Read : wmodem.bin Read : wdsp.bin Read : wnvitem.bin Read : modem_wcn.img Read : wcnnvitem.bin Read : boot_logo.bmp Read : fastboot_logo.bmp Read : logo2.bin Read : logo3.bin Read : logo4.bin Read : logo5.bin Read : boot.img Read : system.img ExtSparse : Compression ratio : 88% Make : persist.img Read : sysinfo.bin ExtSparse : Compression ratio : 4% Make : cache.img Read : recovery.img Make : userdata.img Fail to readout data from device! ERROR : 0000008E:9300003000000000 Error : Failed to read data! Unexpected end of data! Check cable, connection and drivers! Reconnect Power/Cable!

10-06-2020, 06:06	#2 (permalink)
Parahat Junior Member Join Date: May 2013 Posts: 2 Member: 1928949 Status: Offline Thanks Meter: 0	I had same problem with this model. Make : userdata. img Fail to readout data from device! ERROR : 0000008E:9300003000000000

11-07-2020, 05:44	#4 (permalink)
Parahat Junior Member Join Date: May 2013 Posts: 2 Member: 1928949 Status: Offline Thanks Meter: 0	Tried both 2.06 and 2.08 CM2SP2 with/without "Force Read" option. Same result.