Coral 620 pinout - GSM-Forum

GuilleC_PMA · 04-28-2009, 23:56

Plesae need this pinout can't see the module 2.71 the model coral 620 and the pinout please support help pay attention

**InfinitySupport** · 04-30-2009, 19:11

Cable name: Coral-620
cable: L10C, 2x5 pins
Tx: 5
Rx: 4

keyboard top
1 2 3 4 5
6 7 8 9 10

rudyandremely · 05-18-2009, 19:38

but if u have this coral 620 keybord up this phone only have 5 pins on the button so what the real pinout cos is motorola v3 conector type?.

**InfinitySupport** · 05-18-2009, 19:54

Hello,

Are you sure that this phone has 5 pins only ?
Please, double check phone connector.
Also, please, open phone and check phone connector soldered to PCB.
Waiting for your results.

rudyandremely · 05-18-2009, 23:27

i have take apart the phone and u where rigth it has 10 pins. sorry about that at simple sigth it seems only 5 pins. by the way in this ccase whicis the ground?.

**InfinitySupport** · 05-19-2009, 10:57

Hello,
Please, try to check with multimeter where is the GND pin (or you can open phone and see where is the GND).
Please, post here this information (we do not have this information due to pinout was detected by other user with PinFinder but GND pin is unknown).

rudyandremely · 05-20-2009, 21:47

i allready have it and GNG is pin 6. it give me an error then after that phone dint power up then i flash whit flash file from suport and phone alive again but no signal, as soon as i get other like this i will read full flash and post it here.Here is the oparation operation.

COM7 [VCP3] selected
module v2.74
Device: Coral-620
Checking data, wait...
advanced flash detection disabled
Action: "sp-unlock"
unlock method: standard fast
Boot ...
Press and HOLD Power button now !
baud autodetection active
19200 autodetect
Connecting, wait...
Initializing [6223:8A05:8A00]...
CPU: MT6223
chip: 0011:0B59:000C
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: EC257E25062501:2AEA0000000000
flash: AMD/Fujitsu std [D 0008x002000 007Ex010000 0008x002000] 8Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud ...
115200
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
====================
New firmware detected (v.2.74, database date: 08.05.2009):
CELLONSZ23_07A_PCB01_GPRS_MT6223_S00.C2082_2_9_FM_ US_DIGICEL_HDR_AAC.BIN

This firmware is missing in support area. If this phone is good and working:

- make "Read full flash" operation
- send flash backup files to support: [email protected]
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
identification#1 protocol ver: 04
ver. sw 1: CELLONSZ23_07A_PCB01_GPRS_MT6223_S00.C2082_2_9_FM_ US_DIGICEL_HDR_AAC.BIN
ver. sw 2: C2082_2.9.FM.US.DIGICEL_HDR_AAC, 00000000
ffs offset/size: 00700000/00100000
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
sim-lock status: unknown
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
flash: EC257E25062501:2AEA0000000000
Backup required data Done
Patch required data ...
.........................
lock area found
.........................
lock area found
Patch required data Done
Special operation ...
detecting additional parameters...
................................
error: additional parameters detection failed
Special operation Done
Write ...
flash: EC257E25062501:2AEA0000000000
flash: EC257E25062501:2AEA0000000000
Write: lock-area-1
flash: EC257E25062501:2AEA0000000000
flash: EC257E25062501:2AEA0000000000
Write: lock-area-4
error: wrong answer: 3B
error: flash write error: 00652000:00002000
error: wrong answer: 3B
error: flash write error: 00652000:00002000
error: wrong answer: 3B
error: flash write error: 00652000:00002000
error: no any expected answer
error: flash write error: 00652000:00002000
error: wrong answer: 3B
error: flash write error: 00652000:00002000
error: wrong answer: 3B
error: flash write error: 00652000:00002000
error: wrong answer: C5
error: flash write error: 00652000:00002000
0000
error: can't write required area
Write Done
Finalization ...
Finalization Done
Finished, time used: 99 sec
Remove/Install battery now !

**InfinitySupport** · 05-20-2009, 21:51

Hello,

Make "advanced chip detection" option CHECKED and try again.

rudyandremely · 05-21-2009, 00:37

i did allready but phone dont get signal even whit its original sim. which is from digicel from Honduras it has to work in 850/1900Mhz

Rey_negro · 07-21-2009, 19:09

Can you please confirm the pinout of this model!

venomhotboy · 11-30-2009, 22:55

Hello

the L10c cable can't fit into the coral. How do you guys get the cable to fit in the phone? Pleazse I really need your help!!!!!!!!!1

Venom

mrfixit · 12-12-2009, 17:20

coral 620 has same connector as some bird and zte, use 10 pin connector look like mini usb moto cable but is not the same.

Faisal_Computer · 12-13-2009, 07:00

Quote:

Originally Posted by rudyandremely

i did allready but phone dont get signal even whit its original sim. which is from digicel from Honduras it has to work in 850/1900Mhz

what is the phone history ?
ask to your customer why the phone become dead ?
maybe its hardware problem ?

Br

Faisal_Computer

04-28-2009, 23:56	#1 (permalink)
GuilleC_PMA No Life Poster Join Date: Oct 2004 Location: Panamá Posts: 711 Member: 86124 Status: Offline Sonork: 100.1604943 Thanks Meter: 111	Coral 620 pinout Plesae need this pinout can't see the module 2.71 the model coral 620 and the pinout please support help pay attention

05-20-2009, 21:47	#7 (permalink)
rudyandremely Freak Poster Join Date: Jan 2005 Age: 49 Posts: 426 Member: 108193 Status: Offline Thanks Meter: 70	i allready have it and GNG is pin 6. it give me an error then after that phone dint power up then i flash whit flash file from suport and phone alive again but no signal, as soon as i get other like this i will read full flash and post it here.Here is the oparation operation. COM7 [VCP3] selected module v2.74 Device: Coral-620 Checking data, wait... advanced flash detection disabled Action: "sp-unlock" unlock method: standard fast Boot ... Press and HOLD Power button now ! baud autodetection active 19200 autodetect Connecting, wait... Initializing [6223:8A05:8A00]... CPU: MT6223 chip: 0011:0B59:000C status: FF boot packet size: 0400 Release Power button now ! Boot Done Initialize ... detecting chip #00 in region #00... flash: EC257E25062501:2AEA0000000000 flash: AMD/Fujitsu std [D 0008x002000 007Ex010000 0008x002000] 8Mb number of flash chip/regions detected: 01/01 Initialize Done Set baud ... 115200 Set baud Done Initialize bootcode ... Initialize bootcode Done Check firmware integrity ... detect device identification#1... detection phase #1... detect device identification#1 finished identification#1 structure: 2nd [standard] generation ==================== New firmware detected (v.2.74, database date: 08.05.2009): CELLONSZ23_07A_PCB01_GPRS_MT6223_S00.C2082_2_9_FM_ US_DIGICEL_HDR_AAC.BIN This firmware is missing in support area. If this phone is good and working: - make "Read full flash" operation - send flash backup files to support: [email protected] - include in your e-mail full text from phone back label (phone name etc.) ==================== identification#1 detection finished identification#1 protocol ver: 04 ver. sw 1: CELLONSZ23_07A_PCB01_GPRS_MT6223_S00.C2082_2_9_FM_ US_DIGICEL_HDR_AAC.BIN ver. sw 2: C2082_2.9.FM.US.DIGICEL_HDR_AAC, 00000000 ffs offset/size: 00700000/00100000 detect device identification#2... detection phase #1... . detect device identification#2 finished sim-lock status: unknown Check firmware integrity Done Check firmware content ... Check firmware content Done Backup required data ... flash: EC257E25062501:2AEA0000000000 Backup required data Done Patch required data ... ......................... lock area found ......................... lock area found Patch required data Done Special operation ... detecting additional parameters... ................................ error: additional parameters detection failed Special operation Done Write ... flash: EC257E25062501:2AEA0000000000 flash: EC257E25062501:2AEA0000000000 Write: lock-area-1 flash: EC257E25062501:2AEA0000000000 flash: EC257E25062501:2AEA0000000000 Write: lock-area-4 error: wrong answer: 3B error: flash write error: 00652000:00002000 error: wrong answer: 3B error: flash write error: 00652000:00002000 error: wrong answer: 3B error: flash write error: 00652000:00002000 error: no any expected answer error: flash write error: 00652000:00002000 error: wrong answer: 3B error: flash write error: 00652000:00002000 error: wrong answer: 3B error: flash write error: 00652000:00002000 error: wrong answer: C5 error: flash write error: 00652000:00002000 0000 error: can't write required area Write Done Finalization ... Finalization Done Finished, time used: 99 sec Remove/Install battery now ! Last edited by rudyandremely; 05-20-2009 at 21:52.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Coral 620 Digicel unlock error	unlockmoto	Infinity-Box	5	12-13-2009 07:03
coral 620 utstarcom 1239 ut starcom 138	CHAGUA	Basic Micro-Box Software Support (SAMSUNG, HUAWEI, etc...)	0	11-05-2009 18:45
Coral 620 eeprom Backup	Dimortal	Infinity-Box	0	05-21-2009 20:02
Coral 620 Can't Read Pinnout	Dimortal	Infinity-Box	2	05-21-2009 19:11
Help not see Coral 620 in the module	GuilleC_PMA	Infinity-Box	2	04-27-2009 20:06

04-30-2009, 19:11	#2 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Cable name: Coral-620 cable: L10C, 2x5 pins Tx: 5 Rx: 4 keyboard top 1 2 3 4 5 6 7 8 9 10

05-18-2009, 19:38	#3 (permalink)
rudyandremely Freak Poster Join Date: Jan 2005 Age: 49 Posts: 426 Member: 108193 Status: Offline Thanks Meter: 70	but if u have this coral 620 keybord up this phone only have 5 pins on the button so what the real pinout cos is motorola v3 conector type?.

05-18-2009, 19:54	#4 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Hello, Are you sure that this phone has 5 pins only ? Please, double check phone connector. Also, please, open phone and check phone connector soldered to PCB. Waiting for your results.

05-18-2009, 23:27	#5 (permalink)
rudyandremely Freak Poster Join Date: Jan 2005 Age: 49 Posts: 426 Member: 108193 Status: Offline Thanks Meter: 70	i have take apart the phone and u where rigth it has 10 pins. sorry about that at simple sigth it seems only 5 pins. by the way in this ccase whicis the ground?.

05-19-2009, 10:57	#6 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Hello, Please, try to check with multimeter where is the GND pin (or you can open phone and see where is the GND). Please, post here this information (we do not have this information due to pinout was detected by other user with PinFinder but GND pin is unknown).

05-20-2009, 21:51	#8 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Hello, Make "advanced chip detection" option CHECKED and try again.

05-21-2009, 00:37	#9 (permalink)
rudyandremely Freak Poster Join Date: Jan 2005 Age: 49 Posts: 426 Member: 108193 Status: Offline Thanks Meter: 70	i did allready but phone dont get signal even whit its original sim. which is from digicel from Honduras it has to work in 850/1900Mhz

07-21-2009, 19:09	#10 (permalink)
Rey_negro Freak Poster Join Date: Dec 2006 Posts: 229 Member: 417512 Status: Offline Thanks Meter: 46	Can you please confirm the pinout of this model!

11-30-2009, 22:55	#11 (permalink)
venomhotboy No Life Poster Join Date: Jul 2005 Location: Jamaica Age: 41 Posts: 1,061 Member: 162707 Status: Online Thanks Meter: 66	Hello the L10c cable can't fit into the coral. How do you guys get the cable to fit in the phone? Pleazse I really need your help!!!!!!!!!1 Venom

12-12-2009, 17:20	#12 (permalink)
mrfixit No Life Poster Join Date: Apr 2004 Location: MOON Posts: 5,858 Member: 60899 Status: Offline Thanks Meter: 792	coral 620 has same connector as some bird and zte, use 10 pin connector look like mini usb moto cable but is not the same.