Touchscreen calibration failed in N99i - GSM-Forum

lie_james · 01-23-2009, 04:44

sir i have some piece nokia N99i 2 sim & Tv phone.before this phone restart and i have done formated and it's ok.but touchscreen calibration not function.i have done test it from infinity calibration :

1.mode 1 = ok (but calibration touchscreen in phone still not function)
2.mode 2 = failed
3.mode 3 = ok (same in mode 1)
4.mode 4 = failed

here is a back up full flash file i upload today :
http://rapidshare.com/files/18799421...8.B0M.bin.html

here is log :
COM5 selected
module v2.75
Action: touchscreen calibration
mode: 1
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:4041:A2C0
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: MAUI.05C.W06.16
Version: MALATA26_05C_HW
detecting structure #2...
done
60 byte(s) read
imei: 355971010xxxx
connection Ok
detecting structure #5 (mode-2)...
0 1 2 4 5 6 7 8 9error:
detection failed (9 tries)
What to do:
Try another calibration method, if still no luck:
1. make full flash backup for emergency case
2. make "format ffs"
3. Power-On phone
4. Power-Off phone by "Power" button (do NOT remove battery)
5. Repeat "Calibration" operation again
6. if still no luck read full flash and send to support with subject: touchscreen calibration failed
error: can't read required data
error: operation failed !
Finished, time used: 29 sec
Remove/Install battery now !

COM5 selected
module v2.75
Action: touchscreen calibration
mode: 3
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:4041:A2C0
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: MAUI.05C.W06.16
Version: MALATA26_05C_HW
detecting structure #2...
done
60 byte(s) read
imei: 355971010xxxxx
connection Ok
detecting structure #5 (mode-4)...
1 2 3 4 6 7 8 9error:
detection failed (8 tries)
What to do:
Try another calibration method, if still no luck:
1. make full flash backup for emergency case
2. make "format ffs"
3. Power-On phone
4. Power-Off phone by "Power" button (do NOT remove battery)
5. Repeat "Calibration" operation again
6. if still no luck read full flash and send to support with subject: touchscreen calibration failed
error: can't read required data
error: operation failed !
Finished, time used: 30 sec
Remove/Install battery now !

and this is success but phone calibration still same (not function) :
COM5 selected
module v2.75
Action: touchscreen calibration
mode: 0
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:4041:A2C0
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: MAUI.05C.W06.16
Version: MALATA26_05C_HW
detecting structure #2...
done
60 byte(s) read
imei: 355971010xxxxx
connection Ok
detecting structure #5 (mode-1)...
0 1 done
204 byte(s) read
writing data...
verification...
verification Ok
Finished, time used: 18 sec
Remove/Install battery now !

InfinityHelp · 01-23-2009, 19:40

hello!

did you try to calibrate touchscreen using Pen, by touching points on phone LCD?
or touchscreen option is not functioning?

01-23-2009, 04:44	#1 (permalink)
lie_james Freak Poster Join Date: Jun 2007 Location: indonesia Age: 39 Posts: 438 Member: 531344 Status: Offline Thanks Meter: 23	Touchscreen calibration failed in N99i sir i have some piece nokia N99i 2 sim & Tv phone.before this phone restart and i have done formated and it's ok.but touchscreen calibration not function.i have done test it from infinity calibration : 1.mode 1 = ok (but calibration touchscreen in phone still not function) 2.mode 2 = failed 3.mode 3 = ok (same in mode 1) 4.mode 4 = failed here is a back up full flash file i upload today : http://rapidshare.com/files/18799421...8.B0M.bin.html here is log : COM5 selected module v2.75 Action: touchscreen calibration mode: 1 Model: Autodetect 6205-6227 NOR Checking data, wait... Phone should be Switched OFF ! Press and HOLD Power button now ! 19200 autodetect Initializing [6226:8A02:8A01]... CPU: MT6226 high speed boot Off chip: 0031:4041:A2C0 Connecting, wait... Release Power button now ! Phone detected, wait... Hardware: MT6226,E02 Date: 2005.04.12 Version: 1.0 Version: MAUI.05C.W06.16 Version: MALATA26_05C_HW detecting structure #2... done 60 byte(s) read imei: 355971010xxxx connection Ok detecting structure #5 (mode-2)... 0 1 2 4 5 6 7 8 9error: detection failed (9 tries) What to do: Try another calibration method, if still no luck: 1. make full flash backup for emergency case 2. make "format ffs" 3. Power-On phone 4. Power-Off phone by "Power" button (do NOT remove battery) 5. Repeat "Calibration" operation again 6. if still no luck read full flash and send to support with subject: touchscreen calibration failed error: can't read required data error: operation failed ! Finished, time used: 29 sec Remove/Install battery now ! COM5 selected module v2.75 Action: touchscreen calibration mode: 3 Model: Autodetect 6205-6227 NOR Checking data, wait... Phone should be Switched OFF ! Press and HOLD Power button now ! 19200 autodetect Initializing [6226:8A02:8A01]... CPU: MT6226 high speed boot Off chip: 0031:4041:A2C0 Connecting, wait... Release Power button now ! Phone detected, wait... Hardware: MT6226,E02 Date: 2005.04.12 Version: 1.0 Version: MAUI.05C.W06.16 Version: MALATA26_05C_HW detecting structure #2... done 60 byte(s) read imei: 355971010xxxxx connection Ok detecting structure #5 (mode-4)... 1 2 3 4 6 7 8 9error: detection failed (8 tries) What to do: Try another calibration method, if still no luck: 1. make full flash backup for emergency case 2. make "format ffs" 3. Power-On phone 4. Power-Off phone by "Power" button (do NOT remove battery) 5. Repeat "Calibration" operation again 6. if still no luck read full flash and send to support with subject: touchscreen calibration failed error: can't read required data error: operation failed ! Finished, time used: 30 sec Remove/Install battery now ! and this is success but phone calibration still same (not function) : COM5 selected module v2.75 Action: touchscreen calibration mode: 0 Model: Autodetect 6205-6227 NOR Checking data, wait... Phone should be Switched OFF ! Press and HOLD Power button now ! 19200 autodetect Initializing [6226:8A02:8A01]... CPU: MT6226 high speed boot Off chip: 0031:4041:A2C0 Connecting, wait... Release Power button now ! Phone detected, wait... Hardware: MT6226,E02 Date: 2005.04.12 Version: 1.0 Version: MAUI.05C.W06.16 Version: MALATA26_05C_HW detecting structure #2... done 60 byte(s) read imei: 355971010xxxxx connection Ok detecting structure #5 (mode-1)... 0 1 done 204 byte(s) read writing data... verification... verification Ok Finished, time used: 18 sec Remove/Install battery now !

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
s3 touchscreen calibration failed...	gsmsikar	Infinity-Box	6	08-07-2009 07:59
Touchscreen calibration failed	IkaMazini	Infinity-Box	8	08-06-2009 23:24
Ztc N328 touchscreen calibration failed	KK Mobile	Infinity-Box	1	05-06-2009 20:20
<<< China A666 Touchscreen Calibration Failed >>>	khadim100	Infinity-Box	2	04-05-2009 11:36
subject: touchscreen calibration failed : New firmware detected (2.70)	Faisal_Computer	Infinity-Box	1	12-06-2008 13:57

01-23-2009, 19:40	#2 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! did you try to calibrate touchscreen using Pen, by touching points on phone LCD? or touchscreen option is not functioning?