anycool d66 - GSM-Forum

samer8008 · 09-10-2007, 23:21

i have d66 when u tap in tochesh screen 6 its write 4 or 9 write 7
i tray to get full flash befoer deeling with give me msg NEW FIRMWARE
New firmware detected: E553_K5SMCHARAB_E553_GPRS_MT6226_S01.01_1.BIN

plz help

samer8008 · 09-10-2007, 23:47

COM7 [VCP0] selected
Device: Autodetect: 6205-6227, 6228
Checking data, wait...
advanced flash detection active
Action: read eeprom
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
921600
Set baud Done
Check space...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification, method #1...
detection phase #1...
detect device parameters finished
structure: 2nd [enhanced] (or higher) generation
New firmware detected: E553_K5SMCHARAB_E553_GPRS_MT6226_S01.01_1.BIN
- make "Read detailed information, ask/rpl" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
identification data Ok
identification data backup saved: id.3557FC0A.[E553_K5SMCHARAB_E553_GPRS_MT6226_S01.01_1.BIN_7F4D 46C2].rpl
identification detection finished
device-id: 3557FC0A
protocol ver: 04
ver. sw1: E553_K5SMCHARAB_E553_GPRS_MT6226_S01.01_1.BIN
ver. sw2: E553_K5SMCHARAB.01.1
ffs offset/size: 00800000/001FF000
detecting eeprom area in 1 chip(s)...
flash: EC257E25082501:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area: 00000000:00E00000-00FFFFFF
reading [eeprom[E553_K5SMCHARAB_E553_GPRS_MT6226_S01.01_1.BIN]]...
file saved: backup_eeprom[E553_K5SMCHARAB_E553_GPRS_MT6226_S01.01_1.BIN]_20070911-014302.B0E.bin
file saved: backup_system_log_3557FC0A_E553_K5SMCHARAB_E553_GP RS_MT6226_S01.01_1.BIN_7F4D46C2_20070911-014303.B0X.bin
Finished, time used: 575 sec
Remove/Install battery now !

samer8008 · 09-10-2007, 23:57

Phone should be Switched OFF !
Press and HOLD Power button now !
19200
Initializing[6226:8A02]...
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: E553_K5SMCHARAB.01.1_26S01
Version: M500Z_05C_HW
warning: wrong packet checksum
198 of 200 items cleared
warning: wrong packet checksum
0 items remains
Finished, time used: 32 sec
Remove/Install battery now !

pleomax2212 · 09-11-2007, 00:01

Please send the full flash file & log file and rpl file to the support Email

and wait response "Use latest Chinese Miracle 1.48"

samer8008 · 09-11-2007, 00:11

im alredy using Chinese Miracle 1.48"

how i can send full flash file & log file and rpl file to support?

**InfinitySupport** · 09-11-2007, 01:04

Quote:

Originally Posted by samer8008

im alredy using Chinese Miracle 1.48"

how i can send full flash file & log file and rpl file to support?

Please, send file backup_system_log_3557FC0A_E553_K5SMCHARAB_E553_GP RS_MT6226_S01.01_1.BIN_7F4D46C2_20070911-014303.B0X.bin
to [email protected]

pleomax2212 · 09-11-2007, 06:00

thanks very much for support

samer8008 · 09-11-2007, 17:33

i had sent the full bucup to support
backup_flash[E553_K5SMCHARAB_E553_GPRS_MT6226_S01.01_1.BIN]_20070911-011940.B0M.bin

**InfinitySupport** · 09-11-2007, 18:45

Please, send file backup_system_log_3557FC0A_E553_K5SMCHARAB_E553_GP RS_MT6226_S01.01_1.BIN_7F4D46C2_20070911-014303.B0X.bin
to [email protected]

It's very important file.

Thanks !

samer8008 · 09-11-2007, 20:55

ihad sent full bucup and also bacup_log

hope to solve this frimwera

**InfinitySupport** · 09-11-2007, 21:12

@samer8008
Thanks a lot for your help ! In next update we will be able to repair more Anycool-D66 phones.

samer8008 · 09-11-2007, 23:57

im thank u infinity supporet coz u r realy the very greet person

and greet box spically in Chinese Miracle

09-10-2007, 23:21	#1 (permalink)
samer8008 Freak Poster Join Date: Aug 2004 Age: 49 Posts: 140 Member: 78579 Status: Offline Thanks Meter: 3	anycool d66 i have d66 when u tap in tochesh screen 6 its write 4 or 9 write 7 i tray to get full flash befoer deeling with give me msg NEW FIRMWARE New firmware detected: E553_K5SMCHARAB_E553_GPRS_MT6226_S01.01_1.BIN plz help

09-10-2007, 23:47	#2 (permalink)
samer8008 Freak Poster Join Date: Aug 2004 Age: 49 Posts: 140 Member: 78579 Status: Offline Thanks Meter: 3	reed eprom & full flash & ask/rpl done COM7 [VCP0] selected Device: Autodetect: 6205-6227, 6228 Checking data, wait... advanced flash detection active Action: read eeprom Boot... Press and HOLD Power button now ! baud autodetection active 19200 Connecting, wait... Initializing[6226:8A02:8A01]... high speed disabled boot step size: 0002 Release Power button now ! Boot Done Initialize... detecting chip #00 in region #00... flash: EC257E25082501:29EA0000000000 flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb number of flash chip/regions detected: 01/01 Initialize Done Set baud... 921600 Set baud Done Check space... device parameters autodetection in progress.. detecting chip #00 in region #00... flash: EC257E25082501:29EA0000000000 flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb number of flash chip/regions detected: 01/01 total flash region size: 01000000 detect device identification, method #1... detection phase #1... detect device parameters finished structure: 2nd [enhanced] (or higher) generation New firmware detected: E553_K5SMCHARAB_E553_GPRS_MT6226_S01.01_1.BIN - make "Read detailed information, ask/rpl" operation - send "backup_system_log_..." file to support - make "Read full flash" operation - send flash backup file(s) to support - include in your e-mail full text from phone back label (phone name etc.) identification data Ok identification data backup saved: id.3557FC0A.[E553_K5SMCHARAB_E553_GPRS_MT6226_S01.01_1.BIN_7F4D 46C2].rpl identification detection finished device-id: 3557FC0A protocol ver: 04 ver. sw1: E553_K5SMCHARAB_E553_GPRS_MT6226_S01.01_1.BIN ver. sw2: E553_K5SMCHARAB.01.1 ffs offset/size: 00800000/001FF000 detecting eeprom area in 1 chip(s)... flash: EC257E25082501:29EA0000000000 checking area[00000000]: 00000000-00FFFFFF... eeprom found near: 00E00000 detecting eeprom size... eeprom size: 00200000 eeprom chip: 00 eeprom area: 00000000:00E00000-00FFFFFF reading [eeprom[E553_K5SMCHARAB_E553_GPRS_MT6226_S01.01_1.BIN]]... file saved: backup_eeprom[E553_K5SMCHARAB_E553_GPRS_MT6226_S01.01_1.BIN]_20070911-014302.B0E.bin file saved: backup_system_log_3557FC0A_E553_K5SMCHARAB_E553_GP RS_MT6226_S01.01_1.BIN_7F4D46C2_20070911-014303.B0X.bin Finished, time used: 575 sec Remove/Install battery now !

09-10-2007, 23:57	#3 (permalink)
samer8008 Freak Poster Join Date: Aug 2004 Age: 49 Posts: 140 Member: 78579 Status: Offline Thanks Meter: 3	when i tray to format safe Phone should be Switched OFF ! Press and HOLD Power button now ! 19200 Initializing[6226:8A02]... Connecting, wait... Release Power button now ! Phone detected, wait... Hardware: MT6226,E02 Date: 2005.04.12 Version: 1.0 Version: E553_K5SMCHARAB.01.1_26S01 Version: M500Z_05C_HW warning: wrong packet checksum 198 of 200 items cleared warning: wrong packet checksum 0 items remains Finished, time used: 32 sec Remove/Install battery now !

09-11-2007, 00:01	#4 (permalink)
pleomax2212 Crazy Poster Join Date: Aug 2007 Posts: 55 Member: 564965 Status: Offline Thanks Meter: 0	PLease send FLASH & LOG AnD RPL Please send the full flash file & log file and rpl file to the support Email and wait response "Use latest Chinese Miracle 1.48"

09-11-2007, 06:00	#7 (permalink)
pleomax2212 Crazy Poster Join Date: Aug 2007 Posts: 55 Member: 564965 Status: Offline Thanks Meter: 0	thanks support thanks very much for support

09-11-2007, 00:11	#5 (permalink)
samer8008 Freak Poster Join Date: Aug 2004 Age: 49 Posts: 140 Member: 78579 Status: Offline Thanks Meter: 3	im alredy using Chinese Miracle 1.48" how i can send full flash file & log file and rpl file to support?

09-11-2007, 17:33	#8 (permalink)
samer8008 Freak Poster Join Date: Aug 2004 Age: 49 Posts: 140 Member: 78579 Status: Offline Thanks Meter: 3	i had sent the full bucup to support backup_flash[E553_K5SMCHARAB_E553_GPRS_MT6226_S01.01_1.BIN]_20070911-011940.B0M.bin

09-11-2007, 18:45	#9 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Please, send file backup_system_log_3557FC0A_E553_K5SMCHARAB_E553_GP RS_MT6226_S01.01_1.BIN_7F4D46C2_20070911-014303.B0X.bin to [email protected] It's very important file. Thanks !

09-11-2007, 20:55	#10 (permalink)
samer8008 Freak Poster Join Date: Aug 2004 Age: 49 Posts: 140 Member: 78579 Status: Offline Thanks Meter: 3	ihad sent full bucup and also bacup_log hope to solve this frimwera

09-11-2007, 21:12	#11 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	@samer8008 Thanks a lot for your help ! In next update we will be able to repair more Anycool-D66 phones.

09-11-2007, 23:57	#12 (permalink)
samer8008 Freak Poster Join Date: Aug 2004 Age: 49 Posts: 140 Member: 78579 Status: Offline Thanks Meter: 3	im thank u infinity supporet coz u r realy the very greet person and greet box spically in Chinese Miracle

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
pinout anycool d66	hassan1975	Infinity-Box	10	09-04-2007 14:28
Anycool D66+ Flash File needed for MTK-BOX	.:: Sepid Gsm ::.	Chinese Models & Cloned Phones	3	08-25-2007 22:13
Now, Anycool D66 Firmware in the site firmware section	pleomax2212	Infinity-Box	0	08-22-2007 02:42
Anycool D66	pleomax2212	Infinity-Box	5	08-17-2007 09:46
Anycool D66	pleomax2212	Infinity-Box	7	08-14-2007 18:36