Help the beginner to understand with mistakes giving out Infiniti-box - GSM-Forum

emir335 · 03-15-2009, 10:59

Hi! Help please to disassemble mistakes giving out Infinity Box Chinese Miracle I want to format the telephone А898 gives out such mistake:
COM3 [VCP0] selected
module v2.73
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: "format ffs"
eeprom backup enabled, it may takes several minutes !
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:0210:821C
high speed boot Off
error: initialize EMI for BANK0
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect"
Boot Fail
Finished, time used: 4 sec
Remove/Install battery now !
WARNING ! Settings will be cleared, user data erased, Imei set to default value !
Make flash backup before this procedure !

Do you want to continue ?

LoveLess · 03-15-2009, 17:16

Quote:

Originally Posted by emir335

Hi! Help please to disassemble mistakes giving out Infinity Box Chinese Miracle I want to format the telephone А898 gives out such mistake:
COM3 [VCP0] selected
module v2.73
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: "format ffs"
eeprom backup enabled, it may takes several minutes !
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot Off
chip: 0031:0210:821C
high speed boot Off
error: initialize EMI for BANK0
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect"
Boot Fail
Finished, time used: 4 sec
Remove/Install battery now !
WARNING ! Settings will be cleared, user data erased, Imei set to default value !
Make flash backup before this procedure !

Do you want to continue ?

hi..

for safe format option u have to take backup of phone, full flash and eeprom.. after that u can do full format..after formatting u can rebuild imei..

InfinityHelp · 03-15-2009, 22:51

hello!

do you keep power button pressed all the time?
do you use pinfinder?

emir335 · 03-16-2009, 09:11

Hi!
There is no I do not use Pinfider.
I press the button power in booting time and I let off

InfinityHelp · 03-16-2009, 22:20

hello!

you must keep power button pressed untill you see message "Release Power button now !"
do you follow this?

03-15-2009, 10:59	#1 (permalink)
emir335 Junior Member Join Date: Mar 2009 Posts: 3 Member: 995086 Status: Offline Thanks Meter: 0	Help the beginner to understand with mistakes giving out Infiniti-box Hi! Help please to disassemble mistakes giving out Infinity Box Chinese Miracle I want to format the telephone А898 gives out such mistake: COM3 [VCP0] selected module v2.73 Device: Autodetect 6205-6227 NOR Checking data, wait... advanced flash detection enabled Action: "format ffs" eeprom backup enabled, it may takes several minutes ! Boot ... Press and HOLD Power button now ! 19200 fixed Connecting, wait... Initializing [6226:8A02:8A01]... CPU: MT6226 high speed boot Off chip: 0031:0210:821C high speed boot Off error: initialize EMI for BANK0 Release Power button now ! in case of initial connection problem: on/off "Boot baudrate autoselect" Boot Fail Finished, time used: 4 sec Remove/Install battery now ! WARNING ! Settings will be cleared, user data erased, Imei set to default value ! Make flash backup before this procedure ! Do you want to continue ?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to know which processor support by infinity box	ketan.d.chauhan	Infinity-Box	1	02-14-2008 13:31
Help to understand with Samsung А560	cannabiz	Various CDMA/TDMA Cell Phones	0	08-20-2007 16:59
pls help needed how to unlock with ufs or jaf the 1600 voda fone	faisal butt	Nokia Digital Core Technology 4 ( DCT-4 )	3	11-06-2006 14:22
pin outs for the cable to use with atr 5.0	turon	Old Ericsson Phones & Sony Phones	2	08-09-2003 05:52

03-15-2009, 22:51	#3 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! do you keep power button pressed all the time? do you use pinfinder?

03-16-2009, 09:11	#4 (permalink)
emir335 Junior Member Join Date: Mar 2009 Posts: 3 Member: 995086 Status: Offline Thanks Meter: 0	Hi! There is no I do not use Pinfider. I press the button power in booting time and I let off

03-16-2009, 22:20	#5 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! you must keep power button pressed untill you see message "Release Power button now !" do you follow this?