GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   Infinity-Box (https://forum.gsmhosting.com/vbb/f296/)
-   -   Help FRP Blu grand X LTE Mt6737M (https://forum.gsmhosting.com/vbb/f296/help-frp-blu-grand-x-lte-mt6737m-2415898/)

Bscaine 06-05-2018 17:05
Help FRP Blu grand X LTE Mt6737M
 
Hi, been trying to remove FRP of this set. it's secure boot. PLease help

Yusuf Lawal 06-05-2018 17:07
Where is infinity CM2 log?

JayDi 06-05-2018 17:07
Did you hear about search and using software logs?

Bscaine 06-05-2018 19:04
Here's logs from CM2MTK:

Quote:
Wait for phone...
Phone found! [ 172 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...

[DA_ERROR] : SECURITYBOOT_BOOT_NOT_ACCEPTED
Boot Error!

Operation Failed
Elapsed: 00:00:07
Reconnect Power/Cable!
Here's logs from CM2MT2:

Quote:
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM Port (COM172)
MODE : PRELOADER PORT
PORT : 172
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK

Info : Device is not supported yet!

Reconnect Power/Cable!
Hope someone can help. BR

JayDi 06-05-2018 19:15
Both volume keys. Hold them while connecting device to PC.

Bscaine 06-05-2018 20:02
Perfect. Thanx! FRP Secure boot done!

Quote:
Chinese Miracle II [MTK module] v 1.58

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 113 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 504E01FE35394A31AF53124B15545395
Initialize Memory ...
DRAM configured from IDB!
DRAM initialize passed!
DRAM size : 0x40000000
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0xFE , OEM : 014E
[eMMC] : FLASH_INF : [MICRON] , K59J1
[eMMC] : FLASH_CID : FE014E50314A39354B1253AF9553C315
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000001D3000000
[eMMC] : FLASH_UCP : 7472 MiB [eMMC 8 GiB]
DEV RID : 0xC0DAF9426FD76A83CB56B79E108B9BEA
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : BLU
ProdName : BLU_Grand_X_LTE
ProdModel : BLU Grand X LTE
Device : BLU_Grand_X_LTE
AndroidVer: 7.0
MTKxCPU : MT6737M
MTKxPRJ : alps-mp-n0.mp1-V1.19_blu6737m.35.n_P20

SECURITY :
IMEI_SW [1] : 359812080296986
IMEI_SW [2] : 359812080498988
BTMAC Addr : E4C801AEB190
WiFi MAC : E4C801AEBD48

Done!
Elapsed: 00:00:19
Reconnect Power/Cable!


Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 113 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 504E01FE35394A31AF53124B15545395
Initialize Memory ...
DRAM configured from IDB!
DRAM initialize passed!
DRAM size : 0x40000000
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0xFE , OEM : 014E
[eMMC] : FLASH_INF : [MICRON] , K59J1
[eMMC] : FLASH_CID : FE014E50314A39354B1253AF9553C315
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000001D3000000
[eMMC] : FLASH_UCP : 7472 MiB [eMMC 8 GiB]
DEV RID : 0xC0DAF9426FD76A83CB56B79E108B9BEA
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear FRP ( Google Reset Protection )
Clear Ok!

Done!
Elapsed: 00:00:18
Reconnect Power/Cable!

irish_4 06-06-2018 10:25
Quote:
Originally Posted by Bscaine (Post 13166917)
Perfect. Thanx! FRP Secure boot done!
what boot file did you use to connect this phone can you please share? thanks

Lloydz132 09-14-2018 04:51
kindly share the boot file you use

JorgeVla 09-14-2018 07:22
Quote:
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
He uses default DA from CM2MTK, if you fail to get phone service, you need og FW, and select scatter file and do desired operation.


All times are GMT +1. The time now is 15:19.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.11758 seconds with 6 queries

SEO by vBSEO