Help, i need one pinout h806 - GSM-Forum

tynch000 · 12-02-2009, 02:14

Hello people, i need your help, i search pin out for h806 for work whit pin finder, my phone not power up, only charge and enter in modo disk, i need formatffs, but no have pin for phone and not discovery pin with pinfinder

.

Thank you !!!

InfinityHelp · 12-02-2009, 18:48

hello!

what is your phone connector type?
are you sure that it is MT62xx Mcu?

tynch000 · 12-05-2009, 03:22

Quote:

Originally Posted by InfinityHelp

hello!

what is your phone connector type?
are you sure that it is MT62xx Mcu?

connectot type d800, i used l20a
yes mt62xx mcu

InfinityHelp · 12-05-2009, 17:46

hello!

do you able to power On this phone using Pinfinder power?

tynch000 · 12-06-2009, 14:24

yes , i used power cable for pinfinder, and check power on in software.

InfinityHelp · 12-06-2009, 17:48

hello!

if you sure that doing all correctly, but pinfinder still not finding pinouts- search for test points on PCB

mendescell · 08-02-2010, 18:36

there is pinning H806.

TX 11 RX 13

Someone would have the firmware of this device?

InfinityHelp · 08-02-2010, 20:37

Quote:

Originally Posted by mendescell

there is pinning H806.

TX 11 RX 13

Someone would have the firmware of this device?

hello!

please perform "read detailed information" and post here required software version

mendescell · 08-05-2010, 19:09

Quote:

Originally Posted by InfinityHelp

hello!

please perform "read detailed information" and post here required software version

Already got the phone without function.This has no way to read the firmware him because he is dead

mendescell · 08-05-2010, 19:49

Quote:

Originally Posted by InfinityHelp

hello!

please perform "read detailed information" and post here required software version

Able to read the Firmware H806 is that I'll be grateful if you can get it for minutes

InfinityHelp · 08-07-2010, 09:40

hello!

that is not fimrware information.
can you post here "read detailed information" log read by Infinity software?

Stoyan · 09-09-2010, 08:56

I have the same dead phone.
tried this pinouts, but no luck.
Is there anyone who successful repaired dead phone?

InfinityHelp · 09-09-2010, 22:35

Quote:

Originally Posted by Stoyan

I have the same dead phone.
tried this pinouts, but no luck.
Is there anyone who successful repaired dead phone?

hello!

can you check with multimeter if there is 2,8 volts on your phone tx/rx pins.
probably you are using wrong pinout

bisib · 10-18-2010, 14:11

ok i manage to connect H806 with this pinouts on the board (11RX -13TX ) and i have this log i try to flash with few firmwares from support but only white screen if some one have firmware working if its possible to share with us here my log : (on rx/tx don`t have 2,8 v )

module v3.24
Device: Autodetect 6228-6239 NAND
Checking data, wait...
Action: read/check information
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0058]: 002C:00A100800015 [MICRON] MT29F1G08ABB
chip size: 128Mb
page/spare size: 0800/0040
pages per block: 0040
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (921600)...
done
ram test...
testing...
ram test passed
===> detect existing firmware structure...
detect ffs...
ffs offset/size: 03000000/05000000
firmware size: 48Mb
ffs size: 80Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: E706_KLX3WELV18.01.0
detect NAND info...
number of areas/bytes to read: 1:001A0000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
external bootloader is not present
bootloader version: E706_BOOTLOADER_V005_MT6235B_01_1.bin
warning: id-page1 area is invalid
nfi area detection (0 cores) finished: failed
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 05
sw version: E706_KLX3WELV18_PCB01_GPRS_MT6235B_S01.01_0.BIN
project-id: E706_KLX3WELV18.01.0, 00000000
code offset: 00000000
ffs offset/size [01]: 03000000/05000000
rom info structure: [standard] type (05)
TCL-ID is absent
===> done
====================
New firmware found (v.3.24, database date: 01.10.2010):
E706_KLX3WELV18_PCB01_GPRS_MT6235B_S01.01_0.BIN

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to RapidShare AG, Cham, Switzerland or 4shared.com - free file sharing and storage
- include in your e-mail full text from phone back label (phone name etc.)
=======

InfinityHelp · 10-18-2010, 19:32

hello!

what was initial phone problem? are you sure that E706_KLX3WELV18_PCB01_GPRS_MT6235B_S01.01_0 is original firmware?

12-02-2009, 02:14	#1 (permalink)
tynch000 Freak Poster Join Date: Nov 2005 Location: Argentina Posts: 288 Member: 203536 Status: Offline Thanks Meter: 59	Help, i need one pinout h806 Hello people, i need your help, i search pin out for h806 for work whit pin finder, my phone not power up, only charge and enter in modo disk, i need formatffs, but no have pin for phone and not discovery pin with pinfinder . Thank you !!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
plz help i need Z3X pinouts	themobileshop	Z3X-Team Products	2	12-26-2009 15:34
Need A666 pinouts Plz Any One Genius	brain00000	Infinity-Box	1	11-10-2007 19:25
Help, I Need Cable Pinout N95 Chinese	AlexRom51	Infinity-Box	13	09-10-2007 09:50
help i need d500 pinout	sendy_s	UST Pro II	2	02-03-2007 12:16
HELP - I need GD92 pinout !	Liquid	Panasonic	1	10-23-2000 03:46

12-02-2009, 18:48	#2 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! what is your phone connector type? are you sure that it is MT62xx Mcu?

12-05-2009, 17:46	#4 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! do you able to power On this phone using Pinfinder power?

12-06-2009, 14:24	#5 (permalink)
tynch000 Freak Poster Join Date: Nov 2005 Location: Argentina Posts: 288 Member: 203536 Status: Offline Thanks Meter: 59	yes , i used power cable for pinfinder, and check power on in software.

12-06-2009, 17:48	#6 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! if you sure that doing all correctly, but pinfinder still not finding pinouts- search for test points on PCB

08-02-2010, 18:36	#7 (permalink)
mendescell Junior Member Join Date: Jan 2007 Location: Brasil Posts: 18 Member: 437925 Status: Offline Thanks Meter: 3	there is pinning H806. TX 11 RX 13 Someone would have the firmware of this device?

08-07-2010, 09:40	#11 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! that is not fimrware information. can you post here "read detailed information" log read by Infinity software?

09-09-2010, 08:56	#12 (permalink)
Stoyan No Life Poster Join Date: Aug 2002 Location: BULGARIA Age: 53 Posts: 1,185 Member: 14868 Status: Offline Thanks Meter: 44	I have the same dead phone. tried this pinouts, but no luck. Is there anyone who successful repaired dead phone?

10-18-2010, 14:11	#14 (permalink)
bisib Junior Member Join Date: Oct 2006 Location: varna Posts: 35 Member: 382027 Status: Offline Sonork: no Thanks Meter: 1	ok i manage to connect H806 with this pinouts on the board (11RX -13TX ) and i have this log i try to flash with few firmwares from support but only white screen if some one have firmware working if its possible to share with us here my log : (on rx/tx don`t have 2,8 v ) module v3.24 Device: Autodetect 6228-6239 NAND Checking data, wait... Action: read/check information interface: BROM_DLL_v3.1016.00 Connect... Phone should be Switched OFF ! Press and HOLD Power button now ! Connecting... Booting... Release Power button now ! bootcode current/expected: 3.2/3.2 CPU: 6235:8A04:8A01 status: FF bbchip bl ver: FE NOR flash chip: not installed NAND flash id[0058]: 002C:00A100800015 [MICRON] MT29F1G08ABB chip size: 128Mb page/spare size: 0800/0040 pages per block: 0040 bits i/o: 08 address cycles: 04 internal RAM size: 00010000 external RAM: S_DA_RAM_ERROR done Set baudrate (921600)... done ram test... testing... ram test passed ===> detect existing firmware structure... detect ffs... ffs offset/size: 03000000/05000000 firmware size: 48Mb ffs size: 80Mb detect sec ro... detect custom parameters... detect project-id... project-id: E706_KLX3WELV18.01.0 detect NAND info... number of areas/bytes to read: 1:001A0000 reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)... nfi area detection... external bootloader is not present bootloader version: E706_BOOTLOADER_V005_MT6235B_01_1.bin warning: id-page1 area is invalid nfi area detection (0 cores) finished: failed TCL-ID detection... TCL-ID detection done startup code area #1 detection... startup code area #1 detection done rom info ver: 05 sw version: E706_KLX3WELV18_PCB01_GPRS_MT6235B_S01.01_0.BIN project-id: E706_KLX3WELV18.01.0, 00000000 code offset: 00000000 ffs offset/size [01]: 03000000/05000000 rom info structure: [standard] type (05) TCL-ID is absent ===> done ==================== New firmware found (v.3.24, database date: 01.10.2010): E706_KLX3WELV18_PCB01_GPRS_MT6235B_S01.01_0.BIN This firmware is missing in support area. If this phone is good and working: - download latest software from support area and try again, probably this firmware already supported in latest software - make "Read full flash" operation - send flash backup files to support: [email protected] or upload files to RapidShare AG, Cham, Switzerland or 4shared.com - free file sharing and storage - include in your e-mail full text from phone back label (phone name etc.) =======

10-18-2010, 19:32	#15 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! what was initial phone problem? are you sure that E706_KLX3WELV18_PCB01_GPRS_MT6235B_S01.01_0 is original firmware?