Hisense_HLTE100E unlock Process faled: 7E
 

Card found : 01FF3B6D , v0146
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.09

Load IDBase v8331 Ok!


Operation : Identify [ v2.09 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9832E_BASE : SC9832E_eMMC_1GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

Device info :
Product Brand : Hisense
Product Device : sp9832e_1h10_go
Product Model : Hisense U963
Product Name : sp9832e_1h10_go_project
Patch Level : QP1A.190711.020
Ver. Incmt : 47415
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2020-11-05
Build Time : 26.11.2020
Product Info : sp9832e_1h10_go
Product Board : sp9832e_1h10_32b
Board Platform : sp9832e
Product Device : HLTE100E_14
Product Manfct : Hisense
Product Name : HLTE100E_14
Display ID : Hisense_HLTE100E_14_S03_03_01_ZA04
Ver. Incmt : Hisense_HLTE100E_14_S07


Platform Version: MOCORTM_18A_W20.31.2_Debug
Project Version: sharkle_Smart_Phone
BASE Version: FM_BASE_18A_W20.31.2
HW Version: sc9832e_modem
CMP_Time : 07-28-2020 20:36:20

MODEM TAG : MOCORTM_18A_W20.31.2_Debug_FM_BASE_18A_W20.31.2_sc 9832e_modem_sharkle_Smart_Phone

USERDATA : FILESYSTEM : F2FS with FDE ( Full Disk Encryption ***)

- > INFO : Remove cable from device to switch it off!

Done!
Elapsed: 00:01:24

Operation : SP Unlock [ v2.09 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9832E_BASE : SC9832E_eMMC_1GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

Device info :
Product Brand : Hisense
Product Device : sp9832e_1h10_go
Product Model : Hisense U963
Product Name : sp9832e_1h10_go_project
Patch Level : QP1A.190711.020
Ver. Incmt : 47415
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2020-11-05
Build Time : 26.11.2020
Product Info : sp9832e_1h10_go
Product Board : sp9832e_1h10_32b
Board Platform : sp9832e
Product Device : HLTE100E_14
Product Manfct : Hisense
Product Name : HLTE100E_14
Display ID : Hisense_HLTE100E_14_S03_03_01_ZA04
Ver. Incmt : Hisense_HLTE100E_14_S07
NVMng : SecurityInfo
IMEI[1] : 862359045728620
IMEI[2] : 862359045728638
IMEI[3] : 867400020316638
WIFIMAC : FFFFFFFFFFFF
BT_MAC : FFFFFFFFFFFF
SEC : SLS:1, SKS:0, SKV:3


SLStatus : 32
Status : Locked! Server unlock required!
Connecting to server...
Connected
Authenticating...
Authenticated
Checking Client version...
Client version Ok
Balance: 80, price:5
Process...
Process faled: 7E



Reconnect Power/Cable!



Card found : 01FF3B6D , v0146
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.10

Load IDBase v8331 Ok!


Operation : Identify [ v2.10 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9832E_BASE : SC9832E_eMMC_1GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!


- > INFO : Remove cable from device to switch it off!

Done!
Elapsed: 00:00:24

Operation : SP Unlock [ v2.10 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9832E_BASE : SC9832E_eMMC_1GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

Device info :
Product Brand : Hisense
Product Device : sp9832e_1h10_go
Product Model : Hisense U963
Product Name : sp9832e_1h10_go_project
Patch Level : QP1A.190711.020
Ver. Incmt : 47415
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2020-11-05
Build Time : 26.11.2020
Product Info : sp9832e_1h10_go
Product Board : sp9832e_1h10_32b
Board Platform : sp9832e
Product Device : HLTE100E_14
Product Manfct : Hisense
Product Name : HLTE100E_14
Display ID : Hisense_HLTE100E_14_S03_03_01_ZA04
Ver. Incmt : Hisense_HLTE100E_14_S07
NVMng : SecurityInfo
IMEI[1] : 862359045728620
IMEI[2] : 862359045728638
IMEI[3] : 867400020316638
WIFIMAC : FFFFFFFFFFFF
BT_MAC : FFFFFFFFFFFF
SEC : SLS:1, SKS:0, SKV:3


SLStatus : 32
Status : Locked! Server unlock required!

>>> Error : Security override! Unsupported in selected mode!
>>> Device supported in FLASH MODE! Select SS-base or MODEL loader and repeat under FLASH!

Reconnect Power/Cable!


i did done before on 2.9 but today its showing error

Hello,
Try to install v2.09 ( to another folder, f.e. to c:/InfinityBox/CM2SP2v209/ ) and try with v2.09.
Result ?

Or just select SS loader, NOT 0S!

hisense U963 unlock solution 100% Infinity

Thank you for your first post in Infinity support forum section !
We are waiting for your tests reports and software operation text here.