GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 09-16-2020, 07:02   #1 (permalink)
No Life Poster
 
fahad ali khan's Avatar
 
Join Date: Jun 2012
Location: Pakistan
Posts: 2,905
Member: 1771086
Status: Offline
Thanks Meter: 2,407
Huawei 8A JAL-L41


i have Huawei 8A JAL-L41 red info ok

Card found : A60729AF , v0145
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.15

Load IDBase v729152 Ok!

UserName and/or Password not set! Can't continue!

Update failed! Check settings and/or internet connection!

Operation : Identify [ v2.15 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM39)
MODE : BOOTROM
PORT : 39
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+ARB
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : Huawei : 8A_JAT-XXX | Manual : Disabled
BROM : SOCID : 31D92B296049A89C0B5D5A99580F744C992D7A9EA8325F20F1 E64C35BAA2DE18
BROM : ARB : ACTIVE : LOG : F0: 102B 0000 F3: 0000 0000 [0200] V0: 0000 0000 [0001]
BROM : SLA
BROM : SLA Passed!
BROM : SLA CHLNG not used
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : MT6765
EMI : SRC : preloader_k62v1_64_mexico.bin
EMI : CNT : 000E
EMI : [00] : eMMC : DDR3 : ID : 90014A484247346132 : VEN : HYNIX | DEV : HBG4a2 : RAM : [ 3.00 GB ]
EMI : [01] : eMMC : DDR3 : ID : 13014E53304A394237 : VEN : MICRON | DEV : S0J9B7 : RAM : [ 3.00 GB ]
EMI : [02] : eMMC : DDR3 : ID : 90014A484147346132 : VEN : HYNIX | DEV : HAG4a2 : RAM : [ 2.00 GB ]
EMI : [03] : eMMC : DDR3 : ID : 90014A68423861503E : VEN : HYNIX | DEV : hB8aP> : RAM : [ 3.00 GB ]
EMI : [04] : eMMC : DDR3 : ID : 90014A484347386134 : VEN : HYNIX | DEV : HCG8a4 : RAM : [ 4.00 GB ]
EMI : [05] : eMMC : DDR3 : ID : 150100514536334D42 : VEN : SAMSUNG | DEV : QE63MB : RAM : [ 2.00 GB ]
EMI : [06] : eMMC : DDR3 : ID : 150100514436334D42 : VEN : SAMSUNG | DEV : QD63MB : RAM : [ 2.00 GB ]
EMI : [07] : eMMC : DDR3 : ID : 150100474436424D42 : VEN : SAMSUNG | DEV : GD6BMB : RAM : [ 3.00 GB ]
EMI : [08] : eMMC : DDR3 : ID : 150100475036424D42 : VEN : SAMSUNG | DEV : GP6BMB : RAM : [ 3.00 GB ]
EMI : [09] : eMMC : DDR3 : ID : 150100524836344142 : VEN : SAMSUNG | DEV : RH64AB : RAM : [ 4.00 GB ]
EMI : [0A] : eMMC : DDR3 : ID : 13014E53304A394137 : VEN : MICRON | DEV : S0J9A7 : RAM : [ 2.00 GB ]
EMI : [0B] : eMMC : DDR3 : ID : 13014E53304A394638 : VEN : MICRON | DEV : S0J9F8 : RAM : [ 4.00 GB ]
EMI : [0C] : eMMC : DDR3 : ID : 13014E53304A394E38 : VEN : MICRON | DEV : S0J9N8 : RAM : [ 4.00 GB ]
EMI : [0D] : eMMC : LP_DDR4X : ID : 90014A484347386134 : VEN : HYNIX | DEV : HCG8a4 : RAM : [ 4.00 GB ]
EMI : Init EMI from PRELOADER
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00080000 [ 512.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: 150100475036424D420167F3962356AF
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : GP6BMB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0xE8F800000 [ 58.24 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 173EB895D9D577FD27D7A9365315A68B

DA : USB : HIGH-SPEED

Boot done!

Sec. Patch : 2020-07-01
Product Brand : alps
Product Name : full_k62v1_64_mex_a32
Product Device : k62v1_64_mex_a32
Board Platform : mt6765
Product Info : k62v1_64_mex_a32
Product Board : k62v1_64_mexico
Product Manfct : HUAWEI
Product Model : k62v1_64_mex_a32
Patch Level : PPR1.180610.011
Ver. CodeName : REL
Ver. Release : 9
Build Time : 06.07.2020
Product Model : HUAWEI
Product Manfct : alps

USERDATA : FILESYSTEM : F2FS with FBE ( File-Base Encryption )


STORAGE : LifeStatus : eMMC : NOT implemented in selected DA!

Done!
Elapsed: 00:00:23
  Reply With Quote
Old 09-16-2020, 07:06   #2 (permalink)
No Life Poster
 
fahad ali khan's Avatar
 
Join Date: Jun 2012
Location: Pakistan
Posts: 2,905
Member: 1771086
Status: Offline
Thanks Meter: 2,407
whin i do Repair Security show error



Info : Device is not supported yet!
>>> Repeat operation in META mode [ Platform -> Global -> Meta ]

Reconnect Power/Cable!


plz help me how can i fix it some explian
Card found : A60729AF , v0145
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.15

Load IDBase v729152 Ok!

UserName and/or Password not set! Can't continue!

Update failed! Check settings and/or internet connection!

Operation : Identify [ v2.15 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM39)
MODE : BOOTROM
PORT : 39
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+ARB
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : Huawei : 8A_JAT-XXX | Manual : Disabled
BROM : SOCID : 31D92B296049A89C0B5D5A99580F744C992D7A9EA8325F20F1 E64C35BAA2DE18
BROM : ARB : ACTIVE : LOG : F0: 102B 0000 F3: 0000 0000 [0200] V0: 0000 0000 [0001]
BROM : SLA
BROM : SLA Passed!
BROM : SLA CHLNG not used
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : MT6765
EMI : SRC : preloader_k62v1_64_mexico.bin
EMI : CNT : 000E
EMI : [00] : eMMC : DDR3 : ID : 90014A484247346132 : VEN : HYNIX | DEV : HBG4a2 : RAM : [ 3.00 GB ]
EMI : [01] : eMMC : DDR3 : ID : 13014E53304A394237 : VEN : MICRON | DEV : S0J9B7 : RAM : [ 3.00 GB ]
EMI : [02] : eMMC : DDR3 : ID : 90014A484147346132 : VEN : HYNIX | DEV : HAG4a2 : RAM : [ 2.00 GB ]
EMI : [03] : eMMC : DDR3 : ID : 90014A68423861503E : VEN : HYNIX | DEV : hB8aP> : RAM : [ 3.00 GB ]
EMI : [04] : eMMC : DDR3 : ID : 90014A484347386134 : VEN : HYNIX | DEV : HCG8a4 : RAM : [ 4.00 GB ]
EMI : [05] : eMMC : DDR3 : ID : 150100514536334D42 : VEN : SAMSUNG | DEV : QE63MB : RAM : [ 2.00 GB ]
EMI : [06] : eMMC : DDR3 : ID : 150100514436334D42 : VEN : SAMSUNG | DEV : QD63MB : RAM : [ 2.00 GB ]
EMI : [07] : eMMC : DDR3 : ID : 150100474436424D42 : VEN : SAMSUNG | DEV : GD6BMB : RAM : [ 3.00 GB ]
EMI : [08] : eMMC : DDR3 : ID : 150100475036424D42 : VEN : SAMSUNG | DEV : GP6BMB : RAM : [ 3.00 GB ]
EMI : [09] : eMMC : DDR3 : ID : 150100524836344142 : VEN : SAMSUNG | DEV : RH64AB : RAM : [ 4.00 GB ]
EMI : [0A] : eMMC : DDR3 : ID : 13014E53304A394137 : VEN : MICRON | DEV : S0J9A7 : RAM : [ 2.00 GB ]
EMI : [0B] : eMMC : DDR3 : ID : 13014E53304A394638 : VEN : MICRON | DEV : S0J9F8 : RAM : [ 4.00 GB ]
EMI : [0C] : eMMC : DDR3 : ID : 13014E53304A394E38 : VEN : MICRON | DEV : S0J9N8 : RAM : [ 4.00 GB ]
EMI : [0D] : eMMC : LP_DDR4X : ID : 90014A484347386134 : VEN : HYNIX | DEV : HCG8a4 : RAM : [ 4.00 GB ]
EMI : Init EMI from PRELOADER
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00080000 [ 512.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: 150100475036424D420167F3962356AF
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : GP6BMB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0xE8F800000 [ 58.24 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 173EB895D9D577FD27D7A9365315A68B

DA : USB : HIGH-SPEED

Boot done!

Sec. Patch : 2020-07-01
Product Brand : alps
Product Name : full_k62v1_64_mex_a32
Product Device : k62v1_64_mex_a32
Board Platform : mt6765
Product Info : k62v1_64_mex_a32
Product Board : k62v1_64_mexico
Product Manfct : HUAWEI
Product Model : k62v1_64_mex_a32
Patch Level : PPR1.180610.011
Ver. CodeName : REL
Ver. Release : 9
Build Time : 06.07.2020
Product Model : HUAWEI
Product Manfct : alps

USERDATA : FILESYSTEM : F2FS with FBE ( File-Base Encryption )


STORAGE : LifeStatus : eMMC : NOT implemented in selected DA!

Done!
Elapsed: 00:00:23

Operation : Repair Security [ v2.15 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM39)
MODE : BOOTROM
PORT : 39
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+ARB
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : Huawei : 8A_JAT-XXX | Manual : Disabled
BROM : SOCID : 31D92B296049A89C0B5D5A99580F744C992D7A9EA8325F20F1 E64C35BAA2DE18
BROM : ARB : ACTIVE : LOG : F0: 102B 0000 F3: 0000 0000 [0200] V0: 0000 0000 [0001]
BROM : SLA
BROM : SLA Passed!
BROM : SLA CHLNG not used
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : MT6765
EMI : SRC : preloader_k62v1_64_mexico.bin
EMI : CNT : 000E
EMI : [00] : eMMC : DDR3 : ID : 90014A484247346132 : VEN : HYNIX | DEV : HBG4a2 : RAM : [ 3.00 GB ]
EMI : [01] : eMMC : DDR3 : ID : 13014E53304A394237 : VEN : MICRON | DEV : S0J9B7 : RAM : [ 3.00 GB ]
EMI : [02] : eMMC : DDR3 : ID : 90014A484147346132 : VEN : HYNIX | DEV : HAG4a2 : RAM : [ 2.00 GB ]
EMI : [03] : eMMC : DDR3 : ID : 90014A68423861503E : VEN : HYNIX | DEV : hB8aP> : RAM : [ 3.00 GB ]
EMI : [04] : eMMC : DDR3 : ID : 90014A484347386134 : VEN : HYNIX | DEV : HCG8a4 : RAM : [ 4.00 GB ]
EMI : [05] : eMMC : DDR3 : ID : 150100514536334D42 : VEN : SAMSUNG | DEV : QE63MB : RAM : [ 2.00 GB ]
EMI : [06] : eMMC : DDR3 : ID : 150100514436334D42 : VEN : SAMSUNG | DEV : QD63MB : RAM : [ 2.00 GB ]
EMI : [07] : eMMC : DDR3 : ID : 150100474436424D42 : VEN : SAMSUNG | DEV : GD6BMB : RAM : [ 3.00 GB ]
EMI : [08] : eMMC : DDR3 : ID : 150100475036424D42 : VEN : SAMSUNG | DEV : GP6BMB : RAM : [ 3.00 GB ]
EMI : [09] : eMMC : DDR3 : ID : 150100524836344142 : VEN : SAMSUNG | DEV : RH64AB : RAM : [ 4.00 GB ]
EMI : [0A] : eMMC : DDR3 : ID : 13014E53304A394137 : VEN : MICRON | DEV : S0J9A7 : RAM : [ 2.00 GB ]
EMI : [0B] : eMMC : DDR3 : ID : 13014E53304A394638 : VEN : MICRON | DEV : S0J9F8 : RAM : [ 4.00 GB ]
EMI : [0C] : eMMC : DDR3 : ID : 13014E53304A394E38 : VEN : MICRON | DEV : S0J9N8 : RAM : [ 4.00 GB ]
EMI : [0D] : eMMC : LP_DDR4X : ID : 90014A484347386134 : VEN : HYNIX | DEV : HCG8a4 : RAM : [ 4.00 GB ]
EMI : Init EMI from PRELOADER
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00080000 [ 512.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: 150100475036424D420167F3962356AF
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : GP6BMB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0xE8F800000 [ 58.24 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 173EB895D9D577FD27D7A9365315A68B

DA : USB : HIGH-SPEED

Boot done!


Info : Device is not supported yet!
>>> Repeat operation in META mode [ Platform -> Global -> Meta ]

Reconnect Power/Cable!


Operation : Reset PrivacyLock [ v2.15 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM39)
MODE : BOOTROM
PORT : 39
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+ARB
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : Huawei : 8A_JAT-XXX | Manual : Disabled
BROM : SOCID : 31D92B296049A89C0B5D5A99580F744C992D7A9EA8325F20F1 E64C35BAA2DE18
BROM : ARB : ACTIVE : LOG : F0: 102B 0000 F3: 0000 0000 [0200] V0: 0000 0000 [0001]
BROM : SLA
BROM : SLA Passed!
BROM : SLA CHLNG not used
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : MT6765
EMI : SRC : preloader_k62v1_64_mexico.bin
EMI : CNT : 000E
EMI : [00] : eMMC : DDR3 : ID : 90014A484247346132 : VEN : HYNIX | DEV : HBG4a2 : RAM : [ 3.00 GB ]
EMI : [01] : eMMC : DDR3 : ID : 13014E53304A394237 : VEN : MICRON | DEV : S0J9B7 : RAM : [ 3.00 GB ]
EMI : [02] : eMMC : DDR3 : ID : 90014A484147346132 : VEN : HYNIX | DEV : HAG4a2 : RAM : [ 2.00 GB ]
EMI : [03] : eMMC : DDR3 : ID : 90014A68423861503E : VEN : HYNIX | DEV : hB8aP> : RAM : [ 3.00 GB ]
EMI : [04] : eMMC : DDR3 : ID : 90014A484347386134 : VEN : HYNIX | DEV : HCG8a4 : RAM : [ 4.00 GB ]
EMI : [05] : eMMC : DDR3 : ID : 150100514536334D42 : VEN : SAMSUNG | DEV : QE63MB : RAM : [ 2.00 GB ]
EMI : [06] : eMMC : DDR3 : ID : 150100514436334D42 : VEN : SAMSUNG | DEV : QD63MB : RAM : [ 2.00 GB ]
EMI : [07] : eMMC : DDR3 : ID : 150100474436424D42 : VEN : SAMSUNG | DEV : GD6BMB : RAM : [ 3.00 GB ]
EMI : [08] : eMMC : DDR3 : ID : 150100475036424D42 : VEN : SAMSUNG | DEV : GP6BMB : RAM : [ 3.00 GB ]
EMI : [09] : eMMC : DDR3 : ID : 150100524836344142 : VEN : SAMSUNG | DEV : RH64AB : RAM : [ 4.00 GB ]
EMI : [0A] : eMMC : DDR3 : ID : 13014E53304A394137 : VEN : MICRON | DEV : S0J9A7 : RAM : [ 2.00 GB ]
EMI : [0B] : eMMC : DDR3 : ID : 13014E53304A394638 : VEN : MICRON | DEV : S0J9F8 : RAM : [ 4.00 GB ]
EMI : [0C] : eMMC : DDR3 : ID : 13014E53304A394E38 : VEN : MICRON | DEV : S0J9N8 : RAM : [ 4.00 GB ]
EMI : [0D] : eMMC : LP_DDR4X : ID : 90014A484347386134 : VEN : HYNIX | DEV : HCG8a4 : RAM : [ 4.00 GB ]
EMI : Init EMI from PRELOADER
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00080000 [ 512.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: 150100475036424D420167F3962356AF
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : GP6BMB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0xE8F800000 [ 58.24 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 173EB895D9D577FD27D7A9365315A68B

DA : USB : HIGH-SPEED

Boot done!


Backup sensetive data [ 11 ]
Backup path : Backup\MT6765__173EB895D9D577FD27D7A9365315A68B\
[14] Read : NVRAM
[5] Read : NVDATA
[10] Read : PROINFO
[26] Read : LK
[4] Read : NVCFG
[6] Read : PROTECT1
[7] Read : PROTECT2
[9] Read : PERSIST
[0] Read : PRELOADER
[8] Read : SECCFG
Backup done!

Process Block #2
Process Block #3
INFO : [2] PrivacyLock reset done!

Done!
Elapsed: 00:00:25

Reconnect Power/Cable!

Last edited by fahad ali khan; 09-16-2020 at 07:12.
  Reply With Quote
Old 09-16-2020, 10:10   #3 (permalink)
No Life Poster
 
fahad ali khan's Avatar
 
Join Date: Jun 2012
Location: Pakistan
Posts: 2,905
Member: 1771086
Status: Offline
Thanks Meter: 2,407
>>> Repeat operation in META mode [ Platform -> Global -> Meta ]

when i try in meta mode .....meta mode ok when i start repair security showthis Error

Reconnect Power/Cable!


Operation : Repair Security [ v2.15 ]
Mode : META


1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM38)
MODE : BOOTROM
PORT : 38
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+ARB
BROM : BOOTROM
BROM : ARB : ACTIVE : LOG : F0: 102B 0000 F3: 0000 0000 [0200] V0: 0000 0000 [0001]
BROM : SOCID : 31D92B296049A89C0B5D5A99580F744C992D7A9EA8325F20F1 E64C35BAA2DE18
BROM : SLA
BROM : SLA Passed!
BROM : SLA CHLNG not used
BROM : Configuring target for META

BROM : META configured!

INIT : META enter failed by timeout!


[B]Error : Fail to init protocol!
>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable!
[/ plx fix this Error
  Reply With Quote
Old 09-16-2020, 17:28   #4 (permalink)
No Life Poster
 
JayDi's Avatar
 
Join Date: Mar 2007
Posts: 16,795
Member: 462970
Status: Offline
Thanks Meter: 17,233
Repair Security not should work on Huawei, since they used own security implementation.
Write FW with UltraFlash - easy.
Reset FRP - easy.
MemoryTool - easy.
Some deep service - easy.
But not repair security, since it NOT generic MTK phone.
  Reply With Quote
The Following User Says Thank You to JayDi For This Useful Post:
Old 09-17-2020, 07:46   #5 (permalink)
No Life Poster
 
fahad ali khan's Avatar
 
Join Date: Jun 2012
Location: Pakistan
Posts: 2,905
Member: 1771086
Status: Offline
Thanks Meter: 2,407
Quote:
Originally Posted by JayDi View Post
Repair Security not should work on Huawei, since they used own security implementation.
Write FW with UltraFlash - easy.
Reset FRP - easy.
MemoryTool - easy.
Some deep service - easy.
But not repair security, since it NOT generic MTK phone.



OK thanks for explain bro.........


but i want to fix this Mobile


if you have other whay some explain
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 15:32.



Powered by Searchlight © 2020 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.39140 seconds with 7 queries

SEO by vBSEO