huawei g6600 unlock - GSM-Forum

oss001 · 02-02-2012, 16:24

COM29 [VCP0] selected
module v4.13
Action: read unlock codes
unlock method: read codes
Model: Huawei-G6600_64mb
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6235:8A04:8A01]...
CPU: MT6235
high speed boot On
chip: 0000:0000:0003
status: FF
rom: 4D573031
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6235,E04
Date: 2000.00.00
Version: 1.0
Version: E5.2AV01V01.06
Version: BYD35_09A_PMWY_HW
82 byte(s) read
imei: 356344**017363
connection Ok
189 byte(s) read
38 byte(s) read
Phone lock: Off
Phone code: 1234
177 byte(s) read
reading data...
972 byte(s) read
lock[1] code: + 41644366
lock[2] code: + default
lock[3] code: + 1122
lock[4] code: - default
lock[5] code: - default
lock[6] code: + default
lock[7] code: + default
if phone do not ask for a code try: *983*8284#
if code is not accepted by phone:
- make full flash backup for emergency case
- flash phone with good eeprom file
- Power-On phone without sim-card
- Power-Off phone (do not remove battery)
- read unlock codes
- restore original imei
Finished, time used: 15 sec
Remove/Install battery now !

InfinityHelp · 02-03-2012, 14:47

hello!

thank you for this test report!

02-02-2012, 16:24	#1 (permalink)
oss001 Freak Poster Join Date: Jul 2007 Location: some where Age: 41 Posts: 417 Member: 545608 Status: Offline Thanks Meter: 25	huawei g6600 unlock COM29 [VCP0] selected module v4.13 Action: read unlock codes unlock method: read codes Model: Huawei-G6600_64mb Checking data, wait... Phone should be Switched OFF ! Press and HOLD Power button now ! 19200 autodetect Initializing [6235:8A04:8A01]... CPU: MT6235 high speed boot On chip: 0000:0000:0003 status: FF rom: 4D573031 Connecting at 19200, wait... Release Power button now ! Phone detected, wait... Hardware: MT6235,E04 Date: 2000.00.00 Version: 1.0 Version: E5.2AV01V01.06 Version: BYD35_09A_PMWY_HW 82 byte(s) read imei: 356344*017363 connection Ok 189 byte(s) read 38 byte(s) read Phone lock: Off Phone code: 1234 177 byte(s) read reading data... 972 byte(s) read lock[1] code: + 41644366 lock[2] code: + default lock[3] code: + 1122 lock[4] code: - default lock[5] code: - default lock[6] code: + default lock[7] code: + default if phone do not ask for a code try: 983*8284# if code is not accepted by phone: - make full flash backup for emergency case - flash phone with good eeprom file - Power-On phone without sim-card - Power-Off phone (do not remove battery) - read unlock codes - restore original imei Finished, time used: 15 sec Remove/Install battery now !

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Unlocking 5190	Ryu	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	23	01-07-2018 17:14
$50 Reward for unlocking my 6150!!!	TheDon	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	5	03-23-2015 14:21
FAQ about unlock n0kia	man0n	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	11-29-2010 19:06

02-03-2012, 14:47	#2 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! thank you for this test report!