i can't read user code in myway touch... here is the log COM5 [VCP0] selected module v3.38 Action: read unlock codes unlock method: read codes Model: Emblaze-Touch7 Checking data, wait... Phone should be Switched OFF ! Press and HOLD Power button now ! 19200 autodetect Initializing [6228:8A02:8A02]... CPU: MT6228 chip: 0031:8A8C:0101 status: FF Connecting at 19200, wait... Release Power button now ! Phone detected, wait... Hardware: MT6228,E02 Date: 2004.07.02 Version: 1.0 Version: MAUI.07A.W07.28.MP.V22.F2 Version: EZIO28_07A_HW 60 byte(s) read connection Ok 208 byte(s) read reading data #2... reading data #3... reading data #4... reading data #5... 0 byte(s) read error: operation failed ! Finished, time used: 18 sec Remove/Install battery now ! |
log of trying read full flash COM5 [VCP0] selected module v3.38 Device: Emblaze-Touch7 Checking data, wait... advanced flash detection enabled Action: read firmware ====> Boot ... Press and HOLD Power button now ! 19200 fixed Connecting, wait... Initializing [6228:8A02:8A02]... CPU: MT6228 chip: 0031:8A8C:0101 status: FF boot packet size: 0400 Release Power button now ! Boot Done ====> Initialize ... detecting chip #00 in region #00... flash: 90009000900090:90909000000000 flash: 90009000900090:90909000000000 number of flash chip/regions detected: 00/01 flash chip is unknown or damaged. Fault reasons: 1. unknown hardware: contact to support: [email protected] 2. hardware is damaged: check hardware, water inside etc. Initialize Fail Finished, time used: 19 sec Remove/Install battery now ! |
i am sendingthe full flash link to infinity support |
the probleme is solved by 1-Autodetect 6228-6239 NAND 2-format ffs and now the phone asck for code: np here is the log COM5 [VCP1] selected module v3.13 Action: reset settings ("format ffs") Model: Autodetect 6228-6239 NAND Checking data, wait... Phone should be Switched OFF ! Press and HOLD Power button now ! 19200 autodetect Initializing [6228:8A02:8A02]... CPU: MT6228 high speed boot On chip: 0031:8A8C:0101 status: FF Connecting at 19200, wait... Release Power button now ! Phone detected, wait... Hardware: MT6228,E02 Date: 2004.07.02 Version: 1.0 Version: MAUI.07A.W07.28.MP.V22.F2 Version: EZIO28_07A_HW detecting structure #2... 0 done 44 byte(s) read imei: 353xxxxxxxxxx connection Ok building list... done items to clear: 202 warning: wrong packet cs warning: wrong packet cs items cleared: 202 of 202 building list... done items remains: 0 Finished, time used: 37 sec Remove/Install battery now ! |
Quote:
You must select correct model ! |
thinks. but i am selecting myway touch in the software and when lunching it give emblaze-touche. you can try and see . |
after launch module you can still select model manually !! Br Faisal_Computer |
are u trying or just talking...................... |
is there any way to solve this or i wel give the phone to the customer...coz he comes to me every day.... |
Quote:
Solve what ? NP code after format: just repair phone imei Model selection: just select model manually every time when you have to select model http://www.infinity-box.com/download..._selection.jpg |
thinks for support i had this type messed in my soft. i reinstal it and all ok now. so i well test the imei and post result. |
module v3.62 Action: "sp-unlock" unlock method: smart fast Model: MyWay-Touch Checking data, wait... Phone should be Switched OFF ! Press and HOLD Power button now ! 19200 autodetect Initializing [6228:8A02:8A02]... CPU: MT6228 chip: 0031:38DB:0101 status: FF Connecting at 19200, wait... Release Power button now ! Phone detected, wait... Hardware: MT6228,E02 Date: 2004.07.02 Version: 1.0 Version: MAUI.07A.W07.28.MP.V22.F2 Version: EZIO28_07A_HW 44 byte(s) read imei: 35302003012035 connection Ok 157 byte(s) read reading data... reading data #2... building new data... writing data... 145 byte(s) read reading data... 972 byte(s) read building new data... writing data... verifying... verification Ok done Finished, time used: 21 sec Remove/Install battery now ! 100/100 tested |
All times are GMT +1. The time now is 17:02. |
vBulletin Optimisation provided by
vB Optimise (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -