After install cm2 scr we need install drivers also or not plz tell me

after installing cm2 scr module my previous spedtrum module not work
pls help moderator

https://scontent.fktm3-1.fna.fbcdn.n...f9&oe=5A5C5BFD
no thing special text just you are lol

I need this flash file
 

Sorry but i dont have flash file for this model but have a dead mobile ( was on lock and after flash dead) .so i am requesting you and other Cm2 user if they can read and upload Good flash file from this model in bin or Infinity format.

Thanks

sir pleas update mtk secure boot read write========
==============

Sir ned big updat about mtk from long time mtk not updat all cm2 user want in mtk updat

can i remove phone lock in samsung 360E

file can not setup after dowloaded

Hello. Probably, you talk about original b360e on SC8501, it will be supported in near time. Looking fir sample now.

Use 7zip to unpack archive.

Nokia 3310 Read done..
 

Operation : Read Flash [ v1.00 ]

----- > Powered On :
1. Power On device
2. Connect USB cable
3. When device show StorageMode : Press '0' button for a 5 second!
----- > Powered Off :
1. Insert USB cable
2. Wait when device show Charge icon
3. When device show StorageMode : Press '0' button for a 5 second!

Wait for device ...

Device Connected!
BOOT_PWR0 : 0x00600000
BOOT_INIT : 0x81C0024C
BOOT_MODE : DOWNLOAD
BOOT_INTV : 6533G-FPTRUNK-W16.44.2
InternalVersion: g8bec5c4c
Setting BOOTROM mode
BOOT_MODE : BOOTROM
Boot_CPU : 0x08090007 : [SPREADTRUM] : SC6533G
MEMD for flsh_spi32m Branch: none
Boot_CS0 : 0x00000000 : SPI : [SPIDEF] : 25Q32 : 0x00400000 [ 4MiB ]
Performing MemoryInit
Selecting RL
Sending RL
Config : MemoryInit
Config : Loader
BOOT_MODE : RLOADER
Boot IV : 0xFBA2A250
Boot done!

Read done, 0x00400000

Verify FlashContent
MCU verified
CAL verified
FAC verified

Device Info Details :
[0] : SC6533
[1] : 8809
[2] : 8809e2
[3] : CT8851C
[4] : pasw_hs8292u
[5] : flsh_spi32m
[6] : nv3029f/nv3029g/st7789/gc9305/ili9325
[7] : byd3A01/gc6133/gc6123/sp0820
[8] : rdabt_8809
[9] : rdafm_8809e
[10] : release
[11] : 2017-05-25_20:28:12
[12] : HA001_240320_HZX_3310_GOODLUCK_EnFrPeArUr_R48823

Saved to : D:\Other\Nokia 3310\
Saved as : SC6533G_4MiB_SC6533_HA001_240320_HZX_3310_GOODLUCK _EnFrPeArUr_R48823_2017-05-25_202812.ilod


Done!
Elapsed: 00:03:15

Reconnect Power/Cable!

i have uk off but no security tab
any idea?

nokia 230 formate done


Operation : Reset Settings [ v1.00 ]
----- > Powered On :
1. Power On device
2. Connect USB cable
3. When device show StorageMode : Press '0' button for a 5 second!
----- > Powered Off :
1. Insert USB cable
2. Wait when device show Charge icon
3. When device show StorageMode : Press '0' button for a 5 second!

Wait for device ...

Device Connected!
BOOT_PWR0 : 0x00200000
BOOT_INIT : 0x9258BFBC
BOOT_MODE : BOOTROM
Boot_CPU : 0x08090007 : [SPREADTRUM] : SC6533G
MEMD for flsh_spi32m Branch: none
Boot_CS0 : 0x00000000 : SPI : [SPIDEF] : 25Q32 : 0x00400000 [ 4MiB ]
Performing MemoryInit
Selecting RL
Sending RL
Config : MemoryInit
Config : Loader
BOOT_MODE : RLOADER
Boot IV : 0xFBA2A250
Boot done!

Preparing PMT
Verifying PMT
Erasing 1474560 bytes

FileSystem format done!


Done!
Elapsed: 00:00:10

Reconnect Power/Cable!

Need also uk.off file in sw folder.

problem solved thanks

uk off but no securiety option saw in scr

Nice update your team is best in the world

broter pls tell me how enable security in scr

Please, read that and previous page.

Thanks,,,, update please mtk secure boot

What If Handset Came In Dead State Can We Retrieve Those Too With This Update...?

Yes, now supported recovery mode. ( It was not in previous versions )
Also com interface will be enabled.

Great Friend ;)...Bro Any Progress Or News About MTK V2 :confused:

Rocktel S4 Format And Read File Done
 

Hello,
Yes we are working 24x7 for new updates.

Br.
Infinity Box Team.

nokia 230 format done...........
 

https://mega.nz/#!7I4GVJba!epIAgY3Yv...6RN-cynd3eax_c

I Know You People Work 27*7 For Users But Then Also User (Include Me) Need To Know Progress About MTK V2 & Expected Time For Release V2 So We Can Atleast Satisfy Our Mind & Wait Patiently....;):)

hello team we so need mtk new update
 

plz add new mtk like mt6755 meizu apopo and etc

sir how to enable security tab in scr module ?

On first and second page all explained. Just read them.

How To Repair Imei In Spreadtrum SC6533G Because I Have A Peace In Problem Invalid No Network

q mobile i6 frp remove done
 

Card found: S/N : 857D06E3 , v0136
Chinese Miracle II [SPD module] v 1.27

Set mode to : SP [SC773x] eMMC [Android 6.x]

Operation : Format File System / Reset Settings [ v1.27 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 82 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size : 0x0000000117FF7000
State : 0x0001

Mount : /cache
Size : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Android 5.x/6.x : Reset FRP Lock
Reset Ok!


Done!

Elapsed: 00:00:21

Reconnect Power/Cable!


Set mode to : SP [SC773x] eMMC [Android 7.x]

can i remove FRP moto xt1643 android v 7.0 with cm2AST

Sent from my SM-J710F using Tapatalk

Hello,
Try to perform operation and check result.
Note- June 2017 or later patch not supported yet!

Br.
Infinity Box Team.

how to enble adb mode plz post full detail

Sent from my SM-J710F using Tapatalk

Enough follow software instructions.
Rest your messages will be ignored in that thread, until they not related to it.

cm2 best team in the World
 

great update scr . cm2 is the best work every thing .

china rda format done
 

Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.00


Operation : Reset Settings [ v1.00 ]
----- > Powered On :
1. Power On device
2. Connect USB cable
3. When device show StorageMode : Press '0' button for a 5 second!
----- > Powered Off :
1. Insert USB cable
2. Wait when device show Charge icon
3. When device show StorageMode : Press '0' button for a 5 second!

Wait for device ...

Device Connected!
BOOT_PWR0 : 0x00600000
BOOT_INIT : 0x81C0024C
BOOT_MODE : DOWNLOAD
BOOT_INTV : 6533G-FPTRUNK-W16.44.2
InternalVersion: g8bec5c4c
Setting BOOTROM mode
BOOT_MODE : BOOTROM
Boot_CPU : 0x08090007 : [SPREADTRUM] : SC6533G
MEMD for flsh_spi32m Branch: none
Boot_CS0 : 0x00000000 : SPI : [SPIDEF] : 25Q32 : 0x00400000 [ 4MiB ]
Performing MemoryInit
Selecting RL
Sending RL
Config : MemoryInit
Config : Loader
BOOT_MODE : RLOADER
Boot IV : 0xFBA2A250
Boot done!

Preparing PMT
Verifying PMT
Erasing 1474560 bytes

FileSystem format done!

Tried all the tricks cannot enable security tab please help uk is off and no file as uk off in dongle manager folder pls help

Telma k1s and X034duo RDA/ COOLSAND 8851a, 8851cl file unlocking solution

I have dump file, can you make unlock

Attached
Name: IMG_20170630_104115.jpg

Hello. Still trying to find similar hw samples to make something.
Not got any yet, which are compatible with those firmwares ( even display not work. Not enough to start dwvice and run sim card ).

Need uk off in dongle.
Need uk.off file in sw folder.

would be grateful if you could pm me the UK.off file I couldn't find it any where:confused:

BTW. UK ALREADY OFF IN DONGLE

You can make it by yourself. Rename any file to uk.off

Fed-up with this even after adding a file named uk.off in scr folder it dosent work don't know what the hell I am doing wrong QLM also have this problem but not a big issue I badly need scr to work
Any way thank you for trying to help.
BTW mtk ,spd rda all exe work with no problem.

All new releases of modules will force you to same manipulation.
Make sure your uk.off file have exactly "off" extension, not txt or etc.

here it is uk.off place in SCR main folder and done.

thank you buddy you saved my day.:)

here is any activation server for cm2