Infinity Chinese Miracle-2 MTK/Mediatek v2.00 r4 - MT6771 support and other features - Page 11 - GSM-Forum

simeon uche · 06-28-2018, 03:05

Please you guys should add strong update

JayDi · 06-28-2018, 09:56

Quote:

Originally Posted by simeon uche

Please you guys should add strong update

Post log for make detailed report, or explain what you want see.

kalser · 06-28-2018, 10:11

How to solve ?

Card found : A2E0AB70 , v0136
Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.00 r4

Operation : Identify [ v2.00 r4 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM14)
MODE : PRELOADER PORT
PORT : 14
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6583 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001
TYPE : LEGACY MTK

Info : Device is not supported yet!

Reconnect Power/Cable!

JayDi · 06-28-2018, 10:27

Use v1.58 for older devices.

aerry · 06-30-2018, 02:57

thanks for update Team..
Succesfully CM2MT2 for readback oppo F7.

Redtan_70 · 06-30-2018, 05:18

how about Vivo, can you add it,,,,v5,v7,v9...

princesaddam · 06-30-2018, 09:24

Quote:

Originally Posted by Redtan_70

how about Vivo, can you add it,,,,v5,v7,v9...

Hello,
Did u try with MTK2 post logs if u got any error

ali_ipi · 07-01-2018, 00:35

Quote:

Originally Posted by InfinityHelp

Infinity Chinese Miracle-2 MTK/Mediatek v2.00 r4 - MT6771 support and other features !

- Main
Connection level revised
BROM level support optimized

MT6771 CPU supported!
MT6771 moved from TEST to GENERAL support.
Firmwware read
Firmware write
NVRAM read
NVRAM write
Reset Settings / Format FS
Reset FRP
Reset Privacy
MemoryTool

- Service
Repair Security revised. Fixed issues with some NV types.

- Core
EMIDB updated
Hint/Error explain module updated
MT6758 support under test
MT6765 support under test

- FW reader
MT6771 supported
New types of firmwares supported
Scatter creation optimized

- SP Unlock
Revised unlock support for some models
Info: MT6739/MT6763/MT6771 IS NOT supported YET!

- New models included
Limited Oppo support (F7/A3)
Limited Vivo support
And diffirent other models
Some other basic "generic" secure devices support optimized

Known issues/warnings/info:
1. [NAND on MT6570] v1712, v1736 loader packages SHOULD NOT BE USED due to these packages have ftl/ecc errors!
In result you will give read/write FW errors and rest problems at all.
Recommend use v1724 for FACTORY FW flashing, v18xx line for Infinity FW Flash Read and Write
2. [NAND on MT6570] In some cases "stuck on logo" devices can be fixed only via FFU (whole flash) format!
3. [MEMORY TOOL] Partitions state on MEMORY TOOL will be empty in MT6570 NAND phones, it is normal behaviour and can not be fixed.
Read-Write data, which you want, ignore "EMPTY" states.
4. ADL checksum MAY NOT WORK CORRECT on MT6570 NAND devices! Result - stuck after system/userdata partition flashing
5. FileSystem flashing on some SBC-enabled devices ( except SYSTEM/CACHE/USER ) may fail! Solution - exclude them from flashing list.
6. Cheap MT6739 devices require BATTERY REMOVING after EVERY operation in most cases!
7. Meizu support is limited by Preloader Level ( No BROM SLA ) - you must UNTICK "PMT Update" and "PRELOADER" partition from flashing list!
8. [NAND on MT6570] In some cases device MAY DEAD after flashing! Make sure you have TESTED firmware version!
If you have download FW from internet/other source - make sure it preloader CONTAIN 3 EMI record! Preloader jc45btlc with 2 records KILL SOME DEVICE TO UNRECOVERABLE STATE!!!
Preloader info shown now during FW load.

Credits :
kamal_singla - testing and useful files contribution

Important:
- Software installed to new folder /CM2MT2/ and designed to support new models
- Smart-Card firmware v0136 is Ok to use this version
- DO NOT uninstall previous version 1.58 ! If you are trying to connect phone with new software and see a message like LEGACY MTK you should use version 1.58 for this device !

Download link

Upload file to Support

Infinity-Box 13 years (2005 - 2018) updates and support as nobody else - News

Twitter - Facebook - Telegram

Huawei Y5 Prime (2018) MT6739 is support imei repair..

bisubikash · 07-01-2018, 04:58

oppo f7 after format hang on logo n restart plz improve this problem thanks

patel yogesh · 07-01-2018, 15:34

Alwasy let update......

princesaddam · 07-02-2018, 06:59

Quote:

Originally Posted by bisubikash

oppo f7 after format hang on logo n restart plz improve this problem thanks

Hello,
Did u try this one

seyram · 07-03-2018, 09:14

Please am asked to update firmware before I use but after update still software not work. I uninstall and install again but still problem persists why?

Yusuf Lawal · 07-03-2018, 10:15

Quote:

Originally Posted by seyram

Please am asked to update firmware before I use but after update still software not work. I uninstall and install again but still problem persists why?

http://forum.gsmhosting.com/vbb/f296...ndows-2421348/

attariGSM · 07-03-2018, 12:53

plz add oppo f5 cph1725 imei change

attariGSM · 07-03-2018, 12:58

Operation : Repair Security [ v2.00 r4 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MTK USB Port (COM8)
MODE : BOOTROM
PORT : 8
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+SEL
BROM : BOOTROM
MODE : Oppo : F5 | Manual : Disabled
BROM : SLA
BROM : SLA Passed!
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_PL_CRYPTO.bin
AGENT : Found MT6763
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : MT6763
EMI : SRC : preloader_oppo6763_17031.bin
EMI : CNT : 000F
EMI : [00] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 0 B ]
EMI : [01] : eMCP : eMMC+LP/DDR4 , ID : 150100444836444D42 : VEN : SAMSUNG | DEV : DH6DMB : RAM : [ 4.00 GB ]
EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100525836344D42 : VEN : SAMSUNG | DEV : RX64MB : RAM : [ 4.00 GB ]
EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344142 : VEN : SAMSUNG | DEV : RH64AB : RAM : [ 4.00 GB ]
EMI : [04] : eMCP : eMMC+LP/DDR4 , ID : 150100334836434D42 : VEN : SAMSUNG | DEV : 3H6CMB : RAM : [ 6.00 GB ]
EMI : [05] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344D42 : VEN : SAMSUNG | DEV : RH64MB : RAM : [ 4.00 GB ]
EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 150100474436424D42 : VEN : SAMSUNG | DEV : GD6BMB : RAM : [ 3.00 GB ]
EMI : [07] : eMCP : eMMC+LP/DDR3 , ID : 150100475836424D42 : VEN : SAMSUNG | DEV : GX6BMB : RAM : [ 3.00 GB ]
EMI : [08] : eMCP : eMMC+LP/DDR3 , ID : 150100474536424D42 : VEN : SAMSUNG | DEV : GE6BMB : RAM : [ 3.00 GB ]
EMI : [09] : eMCP : eMMC+LP/DDR3 , ID : 150100524436344D42 : VEN : SAMSUNG | DEV : RD64MB : RAM : [ 4.00 GB ]
EMI : [0A] : eMCP : eMMC+LP/DDR3 , ID : 13014E53304A394237 : VEN : UNKNOWN | DEV : S0J9B7 : RAM : [ 3.00 GB ]
EMI : [0B] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 4.00 GB ]
EMI : [0C] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 4.00 GB ]
EMI : [0D] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 3.00 GB ]
EMI : [0E] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 6.00 GB ]
EMI : Init EMI from PRELOADER
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: 90014A484247346132A528C3101DB443
EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HBG4a2
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 5B03F2A4DA432ED49A6273FE845C5A6

DA : USB : HIGH-SPEED

Boot done!

NVRAM check : Passed!

NVRAM condition BAD! Impossible to continue!

Done!
Elapsed: 00:00:33

Reconnect Power/Cable!

07-01-2018, 04:58	#159 (permalink)
bisubikash Major Poster Join Date: Nov 2008 Posts: 47 Member: 912384 Status: Offline Thanks Meter: 18	oppo f7 oppo f7 after format hang on logo n restart plz improve this problem thanks

06-28-2018, 03:05	#151 (permalink)
simeon uche Junior Member Join Date: Dec 2014 Location: Umuahia Posts: 38 Member: 2314220 Status: Offline Sonork: [email protected] Thanks Meter: 1	Please you guys should add strong update

06-28-2018, 10:11	#153 (permalink)
kalser Freak Poster Join Date: Jul 2008 Location: BiH Posts: 181 Member: 825846 Status: Offline Sonork: kalaba Thanks Meter: 23	How to solve ? Card found : A2E0AB70 , v0136 Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.00 r4 Operation : Identify [ v2.00 r4 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM (Android) (COM14) MODE : PRELOADER PORT PORT : 14 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6583 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001 TYPE : LEGACY MTK Info : Device is not supported yet! Reconnect Power/Cable!

06-28-2018, 10:27	#154 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	Use v1.58 for older devices.

06-30-2018, 02:57	#155 (permalink)
aerry Junior Member Join Date: Jan 2015 Location: Indonesia Posts: 5 Member: 2323349 Status: Offline Thanks Meter: 0	thanks for update Team.. Succesfully CM2MT2 for readback oppo F7.

06-30-2018, 05:18	#156 (permalink)
Redtan_70 Freak Poster Join Date: Jun 2008 Location: "NEAR YOU" Posts: 287 Member: 785142 Status: Offline Sonork: 100.1606160 Thanks Meter: 177	how about Vivo, can you add it,,,,v5,v7,v9...

07-01-2018, 15:34	#160 (permalink)
patel yogesh Freak Poster Join Date: Feb 2016 Location: valsad Posts: 126 Member: 2529129 Status: Offline Thanks Meter: 56	Alwasy let update......

07-03-2018, 09:14	#162 (permalink)
seyram Freak Poster Join Date: May 2012 Location: GHANA Posts: 337 Member: 1759904 Status: Offline Thanks Meter: 6	Please am asked to update firmware before I use but after update still software not work. I uninstall and install again but still problem persists why?

07-03-2018, 12:53	#164 (permalink)
attariGSM Freak Poster Join Date: Apr 2015 Location: pakistan Posts: 110 Member: 2383595 Status: Offline Sonork: 100.1681107 Thanks Meter: 10	plz add oppo f5 cph1725 imei change

07-03-2018, 12:58	#165 (permalink)
attariGSM Freak Poster Join Date: Apr 2015 Location: pakistan Posts: 110 Member: 2383595 Status: Offline Sonork: 100.1681107 Thanks Meter: 10	Operation : Repair Security [ v2.00 r4 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MTK USB Port (COM8) MODE : BOOTROM PORT : 8 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x000000E5 BROM : SecMode : SBC+SDA+SEL BROM : BOOTROM MODE : Oppo : F5 \| Manual : Disabled BROM : SLA BROM : SLA Passed! AGENT : Look for suitable BootChain in DA ... AGENT : DA_PL_CRYPTO.bin AGENT : Found MT6763 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : BROM DA : EXT_RAM NOT initialized! EMI : DEV : MT6763 EMI : SRC : preloader_oppo6763_17031.bin EMI : CNT : 000F EMI : [00] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 0 B ] EMI : [01] : eMCP : eMMC+LP/DDR4 , ID : 150100444836444D42 : VEN : SAMSUNG \| DEV : DH6DMB : RAM : [ 4.00 GB ] EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100525836344D42 : VEN : SAMSUNG \| DEV : RX64MB : RAM : [ 4.00 GB ] EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344142 : VEN : SAMSUNG \| DEV : RH64AB : RAM : [ 4.00 GB ] EMI : [04] : eMCP : eMMC+LP/DDR4 , ID : 150100334836434D42 : VEN : SAMSUNG \| DEV : 3H6CMB : RAM : [ 6.00 GB ] EMI : [05] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344D42 : VEN : SAMSUNG \| DEV : RH64MB : RAM : [ 4.00 GB ] EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 150100474436424D42 : VEN : SAMSUNG \| DEV : GD6BMB : RAM : [ 3.00 GB ] EMI : [07] : eMCP : eMMC+LP/DDR3 , ID : 150100475836424D42 : VEN : SAMSUNG \| DEV : GX6BMB : RAM : [ 3.00 GB ] EMI : [08] : eMCP : eMMC+LP/DDR3 , ID : 150100474536424D42 : VEN : SAMSUNG \| DEV : GE6BMB : RAM : [ 3.00 GB ] EMI : [09] : eMCP : eMMC+LP/DDR3 , ID : 150100524436344D42 : VEN : SAMSUNG \| DEV : RD64MB : RAM : [ 4.00 GB ] EMI : [0A] : eMCP : eMMC+LP/DDR3 , ID : 13014E53304A394237 : VEN : UNKNOWN \| DEV : S0J9B7 : RAM : [ 3.00 GB ] EMI : [0B] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 4.00 GB ] EMI : [0C] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 4.00 GB ] EMI : [0D] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 3.00 GB ] EMI : [0E] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN \| DEV : : RAM : [ 6.00 GB ] EMI : Init EMI from PRELOADER EMI : EXT_RAM CFG Passed! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00040000 [ 256.00 KB ] DRAM: 0xC0000000 [ 3.00 GB ] EMMC: 90014A484247346132A528C3101DB443 EMMC: VEN : HYNIX \| OEM : 4A01 \| DEV : HBG4a2 EMMC: BOOT1 : 0x00400000 [ 4.00 MB ] BOOT2 : 0x00400000 [ 4.00 MB ] RPMB : 0x00400000 [ 4.00 MB ] USER : 0x747C00000 [ 29.12 GB ] CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000 RNID : 5B03F2A4DA432ED49A6273FE845C5A6 DA : USB : HIGH-SPEED Boot done! NVRAM check : Passed! NVRAM condition BAD! Impossible to continue! Done! Elapsed: 00:00:33 Reconnect Power/Cable!