Infinity Chinese Miracle-2 MTK/Mediatek v2.09 - SP-unlock for modern platforms + more - Page 5 - GSM-Forum

Yusuf Lawal · 03-08-2020, 11:09

Quote:

Originally Posted by GSM BM mobiles

Does this update supported all oppo new security in meta such as f5 f7 f9 a1k a3s??

Nothing stop you for try it and post result.

JayDi · 03-08-2020, 11:29

Quote:

Originally Posted by khanzada606

is there any risk, like stuck logo and dead on meta mod format option ? or its completely safe

It is completely same, as WIPE option in FLASH mode.
We just ask phone to do all itself.

JayDi · 03-08-2020, 11:30

Quote:

Originally Posted by GSM SINDH

Code:

Operation : SP Unlock [ v2.09 ]
Mode : META

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM24)
MODE : PRELOADER PORT
PORT : 24
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
INIT : META confirmed!

Boot done!

AP_CHIP : MT6739,S01
AP_SWVR : Movitel_M9103_1.0_201907080234
MD_CHIP : MT6739
MD_SWVR : TK_MD_BASIC_HW

IMEI[1] : 3546
ID0 : Lock : Locked! | MNC : 2816 | CNT : 5 | CODE : 12345678
ID1 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 56781234
ID2 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 11112222
ID3 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 33334444
ID4 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 55556666
ID5 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 77778888
ID6 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 99990000
IMEI[2] : 3546
ID0 : Lock : Locked! | MNC : 2816 | CNT : 5 | CODE : 12345678
ID1 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 56781234
ID2 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 11112222
ID3 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 33334444
ID4 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 55556666
ID5 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 77778888
ID6 : Lock : Not Locked | MNC : 0 | CNT : 5 | CODE : 99990000

Done!
Elapsed: 00:04:13

Thast is tell us about unlock has been done.
If SW wrote : Not Locked, that mean it were not locked.
We will add "Unlock success" messages to make it more clear.

GSM SINDH · 03-08-2020, 12:19

Quote:

Originally Posted by JayDi

Thast is tell us about unlock has been done.
If SW wrote : Not Locked, that mean it were not locked.
We will add "Unlock success" messages to make it more clear.

Sir it's still locked by network.

JayDi · 03-08-2020, 13:49

Power off phone.
Make SP Unlock procedure in META.
Without start device repeat SP unlock once again.
Post logs.

lsrfrz · 03-08-2020, 15:27

Thanks INFINITY TEAM
Good Update

ali_ipi · 03-08-2020, 15:37

CM2MT2_v2.09 CAN'T OPEN

=== DongleManager [Infinity] v1.72 [3/8/2020 19:35:48] ===
Searching...
Card-Reader: Alcor Micro USB Smart Card Reader 0
HWID: 000054A5200A4082
Box/Dongle found: Infinity-Box/Dongle
Serial No (S/N): 040254A5
Firmware version: 0140.02
"UK Edition" status: Off
Last launched Application: 0031 v.0127
=> Activations:
- 00: Infinity-Box/Dongle v.0140

abderrahmane bi · 03-08-2020, 17:00

hello tablet woxter x100v3 wont boot up after reset frp in meta mode only stop in logo

Operation : Identify [ v2.09 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM419)
MODE : PRELOADER PORT
PORT : 419
Waiting BOOT ack ...
PRELOADER : ACK confirm FAIL!
BROM : Init BROM
BROM init passed!
CHIP : MT8163 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1952 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT8163
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...

BROM : 0x00002001 : DA SEND ERROR!
ERROR : SECURE BOOT : MISMATCH BOOT SIGNATURE!
INFO : PRELOADER Level : Connect device in BROM mode!

Error : Fail to init protocol!
>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable!

Operation : Identify [ v2.09 ]
Mode : META

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM3)
MODE : PRELOADER PORT
PORT : 3
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
INIT : META confirmed!

Boot done!

AP_CHIP : MT8163
AP_SWTM : Fri Aug 23 20:35:13 CST 2019
AP_SWVR : alps-mp-p0.mp6-V1.121
Modem didn't started! It must be re-initialized!

Patch Level : PPR1.180610.011
Display ID : X100v3_V1.2
Ver. CodeName : REL
Ver. Release : 9
Sec. Patch : 2019-07-05
Build Time : 1566563713
Product Model : X100v3
Product Brand : WOXTER
Product Name : X100v3_EEA
Product Device : X100v3
Product Manfct : emdoor
Product Info : X100v3

Done!
Elapsed: 00:01:23

Operation : Reset Settings/Format FS [ v2.09 ]
Mode : META

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM3)
MODE : PRELOADER PORT
PORT : 3
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
INIT : META confirmed!

Boot done!

AP_CHIP : MT8163
AP_SWTM : Fri Aug 23 20:35:13 CST 2019
AP_SWVR : alps-mp-p0.mp6-V1.121

Format Ok : UserData

Done!
Elapsed: 00:00:30

Reconnect Power/Cable!

Operation : Reset Settings/Format FS [ v2.09 ]
Mode : META

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM3)
MODE : PRELOADER PORT
PORT : 3
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
INIT : META confirmed!

Boot done!

AP_CHIP : MT8163
AP_SWTM : Fri Aug 23 20:35:13 CST 2019
AP_SWVR : alps-mp-p0.mp6-V1.121

Format Ok : UserData

Done!
Elapsed: 00:00:34

Reconnect Power/Cable!

GSM SINDH · 03-08-2020, 17:32

Quote:

Originally Posted by abderrahmane bi

hello tablet woxter x100v3 wont boot up after reset frp in meta mode only stop in logo

Operation : Identify [ v2.09 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM419)
MODE : PRELOADER PORT
PORT : 419
Waiting BOOT ack ...
PRELOADER : ACK confirm FAIL!
BROM : Init BROM
BROM init passed!
CHIP : MT8163 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1952 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT8163
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...

BROM : 0x00002001 : DA SEND ERROR!
ERROR : SECURE BOOT : MISMATCH BOOT SIGNATURE!
INFO : PRELOADER Level : Connect device in BROM mode!

Error : Fail to init protocol!
>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable!

Operation : Identify [ v2.09 ]
Mode : META

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM3)
MODE : PRELOADER PORT
PORT : 3
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
INIT : META confirmed!

Boot done!

AP_CHIP : MT8163
AP_SWTM : Fri Aug 23 20:35:13 CST 2019
AP_SWVR : alps-mp-p0.mp6-V1.121
Modem didn't started! It must be re-initialized!

Patch Level : PPR1.180610.011
Display ID : X100v3_V1.2
Ver. CodeName : REL
Ver. Release : 9
Sec. Patch : 2019-07-05
Build Time : 1566563713
Product Model : X100v3
Product Brand : WOXTER
Product Name : X100v3_EEA
Product Device : X100v3
Product Manfct : emdoor
Product Info : X100v3

Done!
Elapsed: 00:01:23

Operation : Reset Settings/Format FS [ v2.09 ]
Mode : META

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM3)
MODE : PRELOADER PORT
PORT : 3
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
INIT : META confirmed!

Boot done!

AP_CHIP : MT8163
AP_SWTM : Fri Aug 23 20:35:13 CST 2019
AP_SWVR : alps-mp-p0.mp6-V1.121

Format Ok : UserData

Done!
Elapsed: 00:00:30

Reconnect Power/Cable!

Operation : Reset Settings/Format FS [ v2.09 ]
Mode : META

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM3)
MODE : PRELOADER PORT
PORT : 3
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
INIT : META confirmed!

Boot done!

AP_CHIP : MT8163
AP_SWTM : Fri Aug 23 20:35:13 CST 2019
AP_SWVR : alps-mp-p0.mp6-V1.121

Format Ok : UserData

Done!
Elapsed: 00:00:34

Reconnect Power/Cable!

You can only reset in meta mode but can't remove frp lock.

abderrahmane bi · 03-09-2020, 00:31

hello oppo f5 still locked password

Operation : Identify [ v2.09 ]
Mode : META

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB VCOM (Android) (COM87)
MODE : PRELOADER PORT
PORT : 87
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
INIT : META confirmed!

Boot done!

AP_CHIP : MT6763,S01
AP_SWTM : Wed Nov 20 02:29:33 CST 2019
AP_SWVR : ss
AP_HWVR : S01
MD_CHIP : MT6763
MD_SWTM : 2000.00.00
MD_DSPV : 1.0
MD_DSPP : MOLY.LR12A.R1.TC16.SP.V26.P58
MD_SWVR : OPPO6763_C66_N1_HW
MD_HWVR : Unknown

Patch Level : N6F26Q
Ver. CodeName : REL
Ver. Release : 7.1.1
Sec. Patch : 2019-10-05
Build Time : 1574188173
Product Manfct : OPPO
Board Platform : mt6763
Product Model : OPPO CPH1723
Product Brand : OPPO
Product Name : CPH1723
Product Device : M6763A
Product Board : full_oppo6763_17031
Product Info : oppo6763_17031
SW Version : A.41
SW OTA Version : M6763A_11.A.41_0410_201911200045
SW OTA Name : CPH1723EX_11_A.41_191120
Display ID : CPH1723EX_11_A.41_191120
Kernel Info : 4.4.22-G201911200045

IMEI[1] : 8674530xxxxxxxx
IMEI[2] : 8674530xxxxxxxx

Done!
Elapsed: 00:01:01

Operation : Reset Settings/Format FS [ v2.09 ]
Mode : META

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB VCOM (Android) (COM87)
MODE : PRELOADER PORT
PORT : 87
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
INIT : META confirmed!

Boot done!

AP_CHIP : MT6763,S01
AP_SWTM : Wed Nov 20 02:29:33 CST 2019
AP_SWVR : ss
AP_HWVR : S01

Format Ok : UserData

Done!
Elapsed: 00:00:29

GSM SINDH · 03-09-2020, 01:25

Frimware on support please check this too

http://forum.gsmhosting.com/vbb/f296...mpany-2808705/

gsmragim · 03-09-2020, 05:59

plz add cm2 team wiko c210ae network unlock

plz add ..................plz

mt6739 cpu

busfield · 03-09-2020, 10:57

How to change settings from flash mode to meta mode?

EMINEMGSM · 03-09-2020, 13:52

Confirmed Oppo A1k Format SW say Done but phone still ask for password

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM11)
MODE : BOOTROM
PORT : 11
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+ARB
BROM : BOOTROM
BROM : ARB : ACTIVE : LOG : F0: 102B 0000 F3: 0000 0000 [0200] V0: 0000 0000 [0001]
BROM : SOCID : DB0EC55CBED4C4459689D8D0ED91F50628B171AB442DB7F430 BC4A54A92619B1
BROM : Configuring target for META

BROM : META configured!

INIT : META confirmed!

Boot done!

AP_CHIP : MT6765
AP_SWTM : Sun Jan 5 20:51:32 CST 2020
AP_SWVR : CPH1923_11_A.26_200105_fa6f5268

Format Ok : UserData

Done!
Elapsed: 00:00:31

Reconnect Power/Cable!

Shensohau · 03-09-2020, 14:03

Hi, new method for MT6580 will work with hyundai E501? not other tool can repair IMEI from device and root method for it do not work...

03-09-2020, 05:59	#72 (permalink)
gsmragim Freak Poster Join Date: Dec 2015 Location: Bangladesh Age: 36 Posts: 163 Member: 2497406 Status: Offline Sonork: 100.1672478 Thanks Meter: 50	plz add cm2 team wiko c210ae network unlock plz add cm2 team wiko c210ae network unlock plz add ..................plz mt6739 cpu

03-08-2020, 13:49	#65 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	Power off phone. Make SP Unlock procedure in META. Without start device repeat SP unlock once again. Post logs.

03-08-2020, 15:27	#66 (permalink)
lsrfrz Freak Poster Join Date: Dec 2008 Location: null Age: 45 Posts: 371 Member: 931565 Status: Offline Sonork: 100.1626372 Thanks Meter: 47	Thanks INFINITY TEAM Good Update

03-08-2020, 15:37	#67 (permalink)
ali_ipi No Life Poster Join Date: Sep 2011 Location: karachi Posts: 596 Member: 1655288 Status: Offline Thanks Meter: 90	CM2MT2_v2.09 CAN'T OPEN === DongleManager [Infinity] v1.72 [3/8/2020 19:35:48] === Searching... Card-Reader: Alcor Micro USB Smart Card Reader 0 HWID: 000054A5200A4082 Box/Dongle found: Infinity-Box/Dongle Serial No (S/N): 040254A5 Firmware version: 0140.02 "UK Edition" status: Off Last launched Application: 0031 v.0127 => Activations: - 00: Infinity-Box/Dongle v.0140

03-08-2020, 17:00	#68 (permalink)
abderrahmane bi No Life Poster Join Date: May 2006 Location: Marrakech Posts: 855 Member: 282206 Status: Offline Thanks Meter: 102	hello tablet woxter x100v3 wont boot up after reset frp in meta mode only stop in logo Operation : Identify [ v2.09 ] Mode : FLASH 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM (Android) (COM419) MODE : PRELOADER PORT PORT : 419 Waiting BOOT ack ... PRELOADER : ACK confirm FAIL! BROM : Init BROM BROM init passed! CHIP : MT8163 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001 TYPE : LEGACY MTK BROM : SecLevel : 0x00000000 BROM : SecMode : PLAIN [+PRL] BROM : PRELOADER PORT MODE : 0_base : BASE_v1952 \| Manual : Disabled AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT8163 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : 0x00002001 : DA SEND ERROR! ERROR : SECURE BOOT : MISMATCH BOOT SIGNATURE! INFO : PRELOADER Level : Connect device in BROM mode! Error : Fail to init protocol! >>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation! Reconnect Power/Cable! Operation : Identify [ v2.09 ] Mode : META 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM (Android) (COM3) MODE : PRELOADER PORT PORT : 3 Waiting BOOT ack ... PRELOADER : ACK confirmed! INIT : META confirmed! Boot done! AP_CHIP : MT8163 AP_SWTM : Fri Aug 23 20:35:13 CST 2019 AP_SWVR : alps-mp-p0.mp6-V1.121 Modem didn't started! It must be re-initialized! Patch Level : PPR1.180610.011 Display ID : X100v3_V1.2 Ver. CodeName : REL Ver. Release : 9 Sec. Patch : 2019-07-05 Build Time : 1566563713 Product Model : X100v3 Product Brand : WOXTER Product Name : X100v3_EEA Product Device : X100v3 Product Manfct : emdoor Product Info : X100v3 Done! Elapsed: 00:01:23 Operation : Reset Settings/Format FS [ v2.09 ] Mode : META 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM (Android) (COM3) MODE : PRELOADER PORT PORT : 3 Waiting BOOT ack ... PRELOADER : ACK confirmed! INIT : META confirmed! Boot done! AP_CHIP : MT8163 AP_SWTM : Fri Aug 23 20:35:13 CST 2019 AP_SWVR : alps-mp-p0.mp6-V1.121 Format Ok : UserData Done! Elapsed: 00:00:30 Reconnect Power/Cable! Operation : Reset Settings/Format FS [ v2.09 ] Mode : META 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM (Android) (COM3) MODE : PRELOADER PORT PORT : 3 Waiting BOOT ack ... PRELOADER : ACK confirmed! INIT : META confirmed! Boot done! AP_CHIP : MT8163 AP_SWTM : Fri Aug 23 20:35:13 CST 2019 AP_SWVR : alps-mp-p0.mp6-V1.121 Format Ok : UserData Done! Elapsed: 00:00:34 Reconnect Power/Cable!

03-09-2020, 00:31	#70 (permalink)
abderrahmane bi No Life Poster Join Date: May 2006 Location: Marrakech Posts: 855 Member: 282206 Status: Offline Thanks Meter: 102	hello oppo f5 still locked password Operation : Identify [ v2.09 ] Mode : META 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB VCOM (Android) (COM87) MODE : PRELOADER PORT PORT : 87 Waiting BOOT ack ... PRELOADER : ACK confirmed! INIT : META confirmed! Boot done! AP_CHIP : MT6763,S01 AP_SWTM : Wed Nov 20 02:29:33 CST 2019 AP_SWVR : ss AP_HWVR : S01 MD_CHIP : MT6763 MD_SWTM : 2000.00.00 MD_DSPV : 1.0 MD_DSPP : MOLY.LR12A.R1.TC16.SP.V26.P58 MD_SWVR : OPPO6763_C66_N1_HW MD_HWVR : Unknown Patch Level : N6F26Q Ver. CodeName : REL Ver. Release : 7.1.1 Sec. Patch : 2019-10-05 Build Time : 1574188173 Product Manfct : OPPO Board Platform : mt6763 Product Model : OPPO CPH1723 Product Brand : OPPO Product Name : CPH1723 Product Device : M6763A Product Board : full_oppo6763_17031 Product Info : oppo6763_17031 SW Version : A.41 SW OTA Version : M6763A_11.A.41_0410_201911200045 SW OTA Name : CPH1723EX_11_A.41_191120 Display ID : CPH1723EX_11_A.41_191120 Kernel Info : 4.4.22-G201911200045 IMEI[1] : 8674530xxxxxxxx IMEI[2] : 8674530xxxxxxxx Done! Elapsed: 00:01:01 Operation : Reset Settings/Format FS [ v2.09 ] Mode : META 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB VCOM (Android) (COM87) MODE : PRELOADER PORT PORT : 87 Waiting BOOT ack ... PRELOADER : ACK confirmed! INIT : META confirmed! Boot done! AP_CHIP : MT6763,S01 AP_SWTM : Wed Nov 20 02:29:33 CST 2019 AP_SWVR : ss AP_HWVR : S01 Format Ok : UserData Done! Elapsed: 00:00:29

03-09-2020, 01:25	#71 (permalink)
GSM SINDH No Life Poster Join Date: Sep 2015 Location: SINDH, PAKISTAN. Posts: 590 Member: 2452939 Status: Offline Thanks Meter: 256	Frimware on support please check this too http://forum.gsmhosting.com/vbb/f296...mpany-2808705/

03-09-2020, 10:57	#73 (permalink)
busfield Freak Poster Join Date: Sep 2012 Posts: 267 Member: 1808452 Status: Offline Thanks Meter: 21	How to change settings from flash mode to meta mode?

03-09-2020, 13:52	#74 (permalink)
EMINEMGSM No Life Poster Join Date: Mar 2004 Location: GSMHOSTING Age: 42 Posts: 1,461 Member: 57652 Status: Offline Thanks Meter: 1,893	Confirmed Oppo A1k Format SW say Done but phone still ask for password 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek USB Port (COM11) MODE : BOOTROM PORT : 11 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x000000E5 BROM : SecMode : SBC+SDA+ARB BROM : BOOTROM BROM : ARB : ACTIVE : LOG : F0: 102B 0000 F3: 0000 0000 [0200] V0: 0000 0000 [0001] BROM : SOCID : DB0EC55CBED4C4459689D8D0ED91F50628B171AB442DB7F430 BC4A54A92619B1 BROM : Configuring target for META BROM : META configured! INIT : META confirmed! Boot done! AP_CHIP : MT6765 AP_SWTM : Sun Jan 5 20:51:32 CST 2020 AP_SWVR : CPH1923_11_A.26_200105_fa6f5268 Format Ok : UserData Done! Elapsed: 00:00:31 Reconnect Power/Cable!

03-09-2020, 14:03	#75 (permalink)
Shensohau No Life Poster Join Date: Aug 2010 Location: Inside Logic Age: 37 Posts: 5,882 Member: 1377783 Status: Offline Sonork: 100.1611724 Thanks Meter: 3,336	Hi, new method for MT6580 will work with hyundai E501? not other tool can repair IMEI from device and root method for it do not work...