Infinity Chinese Miracle-2 MTK/MediaTek v2.17 - Standalone auth ON - Page 2 - GSM-Forum

princesaddam · 01-24-2021, 05:43

Always unique and world first now copy pasters get ready to copy and say world first
PS: Iam wondering when ru sleeping take some rest also

Sent from my vivo 1818 using Tapatalk

mesut07 · 01-24-2021, 05:44

Quote:

Originally Posted by JayDi

READMI 6A

HWreport :

Code:

Operation : HW Report [ v2.17 ]
HWreport : Mode : eMMC
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM23)
MODE : BOOTROM
PORT : 23
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN RAPHAEL
BROM : MEID : xxxxxxxxxxxxxxxxxxxxx
BROM : SecLevel : 0x000000E7
BROM : SecMode  : SBC+SLA+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v1944 | Manual : Disabled
BROM : SOCID : xxxxxxxxxxxxxxxxxxxxxxx
BROM : SLA : Local Auth 
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : INFINITY
     EMI : SRC : PRELOADER_INFINITY_0
     EMI : CNT : 0001
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00038000 [ 224,00 KB ]
        DRAM: 0x80000000 [ 2,00 GB ]

        EMMC: 150100514536334D42xxxxxxxxxxxxx
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : QE63MB
        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB   : 0x00400000 [ 4,00 MB ]
              USER   : 0x3A3E00000 [ 14,56 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : xxxxxxxxxxxxxxxxxxxxxxx

DA : USB : HIGH-SPEED

Boot done!

Memory Info : 
    CID : 150100514536334D42xxxxxxxxxxxxx
    MEM : VEN : SAMSUNG | OEM : 01 | DEV : QE63MB
    DAT :  Size: 14910 MB, Max.Speed: 52000 kHz, blklen(512), nblks(30535680), ro(0)

EXT_CSD Info : 
EXT_CSD rev.		 : v1.8 ( MMC v5.1 )
     CSD struct rev.		 : v1.2
     Supported command sets	 : 1h
     HPI features		 : 1h
     BG operations support	 : 1h
     BG operations status	 : 0h
     Correct prg. sectors	 : 0h
     1st init time after part. : 3000 ms
     Min. write perf.(DDR,52MH,8b): 0h
     Min. read perf. (DDR,52MH,8b): 0h
     TRIM timeout: 0 ms
     Secure feature support: 55h
     Secure erase timeout  : 8100 ms
     Secure trim timeout   : 5100 ms
     Access size	     : 3584 bytes
     HC erase unit size    : 512 kbytes
     HC erase timeout      : 300 ms
     HC write prot grp size: 8192 kbytes
     HC erase grp def.     : 0h
     Reliable write sect count: 1h
     Sleep current (VCC) : 7h
     Sleep current (VCCQ): 7h
     Sleep/awake timeout : 26214400 ns
     Sector count : 1d1f000h
     Min. WR Perf.  (52MH,8b): 0h
     Min. Read Perf.(52MH,8b): 0h
     Min. WR Perf.  (26MH,8b,52MH,4b): 0h
     Min. Read Perf.(26MH,8b,52MH,4b): 0h
     Min. WR Perf.  (26MH,4b): 0h
     Min. Read Perf.(26MH,4b): 0h
     Power class: 0
     Power class(DDR,52MH,3.6V): 0h
     Power class(DDR,52MH,1.9V): 0h
     Power class(26MH,3.6V)	 : 0h
     Power class(52MH,3.6V)	 : 0h
     Power class(26MH,1.9V)	 : 0h
     Power class(52MH,1.9V)	 : 0h
     Part. switch timing    : 2h
     Out-of-INTR busy timing: ah
     Card type       : 57h
     Command set     : 0h
     Command set rev.: 0h
     HS timing       : 0h
     Bus width       : 0h
     Erase memory content : 0h
     Partition config      : 48h
     Boot partition size   : 4096 kbytes
     Boot information      : 7h
     Boot config protection: 0h
     Boot bus width	     : 2h
     Boot area write prot  : 0h
     User area write prot  : 0h
     FW configuration      : 0h
     RPMB size : 4096 kbytes
     Write rel. setting  : 1fh
     Write rel. parameter: 14h
     Start background ops : 0h
     Enable background ops: 2h
     H/W reset function   : 1h
     HPI management	    : 0h
     Max. enhanced area size : 3a3h (7626752 kbytes)
     Part. support  : 7h
     Part. attribute: 0h
     Part. setting  : 0h
     General purpose 1 size : 0h (0 kbytes)
     General purpose 2 size : 0h (0 kbytes)
     General purpose 3 size : 0h (0 kbytes)
     General purpose 4 size : 0h (0 kbytes)
     Enh. user area size : 0h (0 kbytes)
     Enh. user area start: 0h
     Bad block mgmt mode: 0h

Overall status : 

    MLC status : 0% - 10% used
    SLC status : 0% - 10% used
    EOL status : Normal  ( Less than 80% reserved blocks used )


    RPMB : RPMB  KEY EXISTS!  [State : NOT CLEAN : UNUSABLE]


Done!
Elapsed: 00:00:22

Identify :

Code:

Operation : Identify [ v2.17 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM23)
MODE : BOOTROM
PORT : 23
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN RAPHAEL
BROM : MEID : xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
BROM : SecLevel : 0x000000E7
BROM : SecMode  : SBC+SLA+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v1944 | Manual : Disabled
BROM : SOCID : xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
BROM : SLA : Local Auth 
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : INFINITY
     EMI : SRC : PRELOADER_INFINITY_0
     EMI : CNT : 0001
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00038000 [ 224,00 KB ]
        DRAM: 0x80000000 [ 2,00 GB ]

        EMMC: 150100514536334D420xxxxxxxxxxxxxxxxxx
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : QE63MB
        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB   : 0x00400000 [ 4,00 MB ]
              USER   : 0x3A3E00000 [ 14,56 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : xxxxxxxxxxxxxxxxxxxxxxxxxxxxx

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : O11019
Display ID     : O11019
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-05-05
Build Time     : 11.06.2018
Product Model  : Redmi 6A
Product Brand  : xiaomi
Product Name   : cactus
Product Device : cactus
Product Info   : cactus
Product Manfct : Xiaomi
Board Platform : mt6765

USERDATA : FILESYSTEM : EXT4  with FDE ( Full Disk Encryption *)

NVRAM check : Passed!
NVRAM : SEC SIGNED  [ IMEI RSA SIGNED ]

Backup sensetive data [ 8 ]
Backup path : Backup\MT6765__xxxxxxxxxxxxx\
[25] Read : NVRAM
[8] Read : NVDATA
[15] Read : PROINFO
[27] Read : LK
[7] Read : NVCFG
[10] Read : PROTECT1
[11] Read : PROTECT2
Backup done!


STORAGE : LifeStatus : eMMC : OK!


PRELOADER : DEVICE : 
DEV : MT6765
NME : preloader_cactus.bin
CNT : 000A
 EMI : [00] : eMMC : DDR3 : ID : 90014A484247346132 : VEN : HYNIX     | DEV : HBG4a2 : RAM : [ 3,00 GB ]
 EMI : [01] : eMMC : DDR3 : ID : 90014A68423861503E : VEN : HYNIX     | DEV : hB8aP> : RAM : [ 3,00 GB ]
 EMI : [02] : eMMC : DDR3 : ID : 90014A484147346132 : VEN : HYNIX     | DEV : HAG4a2 : RAM : [ 2,00 GB ]
 EMI : [03] : eMMC : DDR3 : ID : 13014E53304A394237 : VEN : MICRON    | DEV : S0J9B7 : RAM : [ 3,00 GB ]
 EMI : [04] : eMMC : DDR3 : ID : 150100514536334D42 : VEN : SAMSUNG   | DEV : QE63MB : RAM : [ 2,00 GB ]
 EMI : [05] : eMMC : DDR3 : ID : 150100474436424D42 : VEN : SAMSUNG   | DEV : GD6BMB : RAM : [ 3,00 GB ]
 EMI : [06] : eMMC : DDR3 : ID : 13014E53304A394137 : VEN : MICRON    | DEV : S0J9A7 : RAM : [ 2,00 GB ]
 EMI : [07] : eMMC : DDR3 : ID : 150100524836344142 : VEN : SAMSUNG   | DEV : RH64AB : RAM : [ 4,00 GB ]
 EMI : [08] : eMMC : DDR3 : ID : 90014A484347386134 : VEN : HYNIX     | DEV : HCG8a4 : RAM : [ 4,00 GB ]
 EMI : [09] : eMMC : DDR3 : ID : 150100514436334D42 : VEN : SAMSUNG   | DEV : QD63MB : RAM : [ 2,00 GB ]


Done!
Elapsed: 00:00:39

Read FW:

Code:

Operation : Read Firmware [ v2.17 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM23)
MODE : BOOTROM
PORT : 23
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN RAPHAEL
BROM : MEID : xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
BROM : SecLevel : 0x000000E7
BROM : SecMode  : SBC+SLA+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v1944 | Manual : Disabled
BROM : SOCID : xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
BROM : SLA : Local Auth 
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : INFINITY
     EMI : SRC : PRELOADER_INFINITY_0
     EMI : CNT : 0001
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00038000 [ 224,00 KB ]
        DRAM: 0x80000000 [ 2,00 GB ]

        EMMC: 150100514536334D4203Cxxxxxxxxxxx
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : QE63MB
        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB   : 0x00400000 [ 4,00 MB ]
              USER   : 0x3A3E00000 [ 14,56 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : xxxxxxxxxxxxxxxxxxxxxxx

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : O11019
Display ID     : O11019
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-05-05
Build Time     : 11.06.2018
Product Model  : Redmi 6A
Product Brand  : xiaomi
Product Name   : cactus
Product Device : cactus
Product Info   : cactus
Product Manfct : Xiaomi
Board Platform : mt6765

MT6765__Xiaomi__Redmi_6A__8.1.0__O11019__O11019__cactus

Read : preloader.bin
Read : recovery.img
Read : persist.img
ExtSparse : Compression ratio : 100%
Read : proinfo.img
Read : efuse.img
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : tinysys-sspm.bin
Read : nvram.bin
Read : vbmeta.img
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : odmdtbo.img
Read : cust.img
ExtSparse : Compression ratio : 32%
Read : tz.img
Read : vendor.img
ExtSparse : Compression ratio : 53%
Read : system.img
ExtSparse : Compression ratio : 24%
Read : cache.img
Read : userdata.img

FW Size  : 2,86 GB
Android Info saved : _Android_info.txt
Scatter  : MT6765_Android_scatter.txt
Saved to : C:\MT6765__Xiaomi__Redmi_6A__8.1.0__O11019__O11019__cactus\

Done!
Elapsed: 00:07:26

Flash :

Code:

Created by Infinity-Box (c) 2021
Chinese Miracle II : MediaTek Service Module
Device Info file   : _Android_info.txt

Patch Level    : O11019
Display ID     : O11019
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-05-05
Build Time     : 11.06.2018
Product Model  : Redmi 6A
Product Brand  : xiaomi
Product Name   : cactus
Product Device : cactus
Product Info   : cactus
Product Manfct : Xiaomi
Board Platform : mt6765

Preloader [HW DEV] Info : 
 EMI : DEV : MT6765
 EMI : SRC : preloader_cactus.bin
 EMI : CNT : 000A
 EMI : [00] : eMMC : DDR3 : ID : 90014A484247346132 : VEN : HYNIX     | DEV : HBG4a2 : RAM : [ 3,00 GB ]
 EMI : [01] : eMMC : DDR3 : ID : 90014A68423861503E : VEN : HYNIX     | DEV : hB8aP> : RAM : [ 3,00 GB ]
 EMI : [02] : eMMC : DDR3 : ID : 90014A484147346132 : VEN : HYNIX     | DEV : HAG4a2 : RAM : [ 2,00 GB ]
 EMI : [03] : eMMC : DDR3 : ID : 13014E53304A394237 : VEN : MICRON    | DEV : S0J9B7 : RAM : [ 3,00 GB ]
 EMI : [04] : eMMC : DDR3 : ID : 150100514536334D42 : VEN : SAMSUNG   | DEV : QE63MB : RAM : [ 2,00 GB ]
 EMI : [05] : eMMC : DDR3 : ID : 150100474436424D42 : VEN : SAMSUNG   | DEV : GD6BMB : RAM : [ 3,00 GB ]
 EMI : [06] : eMMC : DDR3 : ID : 13014E53304A394137 : VEN : MICRON    | DEV : S0J9A7 : RAM : [ 2,00 GB ]
 EMI : [07] : eMMC : DDR3 : ID : 150100524836344142 : VEN : SAMSUNG   | DEV : RH64AB : RAM : [ 4,00 GB ]
 EMI : [08] : eMMC : DDR3 : ID : 90014A484347386134 : VEN : HYNIX     | DEV : HCG8a4 : RAM : [ 4,00 GB ]
 EMI : [09] : eMMC : DDR3 : ID : 150100514436334D42 : VEN : SAMSUNG   | DEV : QD63MB : RAM : [ 2,00 GB ]

Operation : Write Flash [ v2.17 ]

Repartition   : Enabled
Flash Verify  : Enabled
Reg.Pre-Erase : Enabled
Verify HW/SW  : Enabled
SData Backup  : Disabled
Safe UserData : Disabled
Flash Format  : Disabled

Files :22
[FL] : Set : preloader_cactus.bin
[FL] : Set : recovery.img
[FL] : Set : efuse.img
[FL] : Set : md1rom.img
[FL] : Set : spmfw.img
[FL] : Set : tinysys-scp.bin
[FL] : Set : tinysys-scp.bin
[FL] : Set : tinysys-sspm.bin
[FL] : Set : tinysys-sspm.bin
[FL] : Set : vbmeta.img
[FL] : Set : lk.bin
[FL] : Set : lk.bin
[FL] : Set : boot.img
[FL] : Set : logo.bin
[FL] : Set : odmdtbo.img
[FL] : Set : cust.img
[FL] : Set : tz.img
[FL] : Set : tz.img
[FL] : Set : vendor.img
[FL] : Set : system.img
[FL] : Set : cache.img
[FL] : Set : userdata.img

[FL] : Total size : 0xB32BDBC8 [ 2,80 GB ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM23)
MODE : BOOTROM
PORT : 23
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN RAPHAEL
BROM : MEID : xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
BROM : SecLevel : 0x000000E7
BROM : SecMode  : SBC+SLA+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v1944 | Manual : Disabled
BROM : SOCID : xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
BROM : SLA : Local Auth 
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : MT6765
     EMI : SRC : preloader_cactus.bin
     EMI : CNT : 000A
 EMI : [00] : eMMC : DDR3 : ID : 90014A484247346132 : VEN : HYNIX     | DEV : HBG4a2 : RAM : [ 3,00 GB ]
 EMI : [01] : eMMC : DDR3 : ID : 90014A68423861503E : VEN : HYNIX     | DEV : hB8aP> : RAM : [ 3,00 GB ]
 EMI : [02] : eMMC : DDR3 : ID : 90014A484147346132 : VEN : HYNIX     | DEV : HAG4a2 : RAM : [ 2,00 GB ]
 EMI : [03] : eMMC : DDR3 : ID : 13014E53304A394237 : VEN : MICRON    | DEV : S0J9B7 : RAM : [ 3,00 GB ]
 EMI : [04] : eMMC : DDR3 : ID : 150100514536334D42 : VEN : SAMSUNG   | DEV : QE63MB : RAM : [ 2,00 GB ]
 EMI : [05] : eMMC : DDR3 : ID : 150100474436424D42 : VEN : SAMSUNG   | DEV : GD6BMB : RAM : [ 3,00 GB ]
 EMI : [06] : eMMC : DDR3 : ID : 13014E53304A394137 : VEN : MICRON    | DEV : S0J9A7 : RAM : [ 2,00 GB ]
 EMI : [07] : eMMC : DDR3 : ID : 150100524836344142 : VEN : SAMSUNG   | DEV : RH64AB : RAM : [ 4,00 GB ]
 EMI : [08] : eMMC : DDR3 : ID : 90014A484347386134 : VEN : HYNIX     | DEV : HCG8a4 : RAM : [ 4,00 GB ]
 EMI : [09] : eMMC : DDR3 : ID : 150100514436334D42 : VEN : SAMSUNG   | DEV : QD63MB : RAM : [ 2,00 GB ]
     EMI : Init EMI from PRELOADER
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00038000 [ 224,00 KB ]
        DRAM: 0x80000000 [ 2,00 GB ]

        EMMC: 150100514536334D4203Cxxxxxxxx
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : QE63MB
        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB   : 0x00400000 [ 4,00 MB ]
              USER   : 0x3A3E00000 [ 14,56 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

DA : USB : HIGH-SPEED

Boot done!

[FL] : HW verification passed!

SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432

[FL] : Pre-Erase 
Erase : 0x0000000000000000 : 0x0000000005688000
Erase : 0x0000000007688000 : 0x0000000006000000
Erase : 0x000000000E800000 : 0x0000000000800000
Erase : 0x0000000013000000 : 0x0000000000200000
Erase : 0x0000000013500000 : 0x0000000008980000
Erase : 0x000000001FE80000 : 0x00000000FA980000
Erase : 0x000000011B000000 : 0x00000000D0000000

[FL] : RePartition 
[FL] : RePartition Ok!


[FL] : Flashing now ... 

Write : PRELOADER
Update bootloader backup copy ... 
Update bootloader backup copy Ok!
Write : RECOVERY
Write : EFUSE
Write : MD1IMG
Write : SPMFW
Write : SCP1
Write : SCP2
Write : SSPM_1
Write : SSPM_2
Write : VBMETA
Write : LK
Write : LK2
Write : BOOT
Write : LOGO
Write : ODMDTBO
Write : CUST
FAIL : SEC : IMG TOO LARGE
Write : TEE1
Write : TEE2
Write : VENDOR
Write : SYSTEM
Write : CACHE
Write : USERDATA

Ultra : Ok!

SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432

[FL] : RePartition 
[FL] : RePartition Ok!

[FL] : Flashing finished!

Done!
Elapsed: 00:02:21

Reconnect Power/Cable!

Can we load with the bootloader off?

princesaddam · 01-24-2021, 05:52

Quote:

Originally Posted by mesut07

Can we load with the bootloader off?

Hello,
Yes without bootloader unlock u can do ur desire operations

Sent from my vivo 1818 using Tapatalk

hariichha · 01-24-2021, 05:53

Quote:

Originally Posted by JayDi

XIAOMI 6A
XIAOMI 8 Pro
VIVO
HUAWEI

All test are made with default DA.
No preloader,
No auth,
No da has been selected.

Just sSLA option enabled and BROM mode.
That way allow you boot most of devices already.

Now a bit more possiblities open

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM30)
MODE : BOOTROM
PORT : 30
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BOOTROM
BROM : LOG : F0: 102B 0000 F3: 1001 0000 [0200] F3: 1001 0000 F7: 0000 0000 V0: 0000 0000 [0001]
BROM : SOCID : C5F800CACE4AA1AA76C1C07B8623E0EED4159F87C7E42D7ACC 0C67548997BADF
BROM : Configuring target for META

BROM : META configured!

INIT : META enter failed by timeout!

Error : Fail to init protocol!
>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable!

EMI : DEV : MT6765
EMI : SRC : preloader_cereus.bin
EMI : CNT : 000B
EMI : [00] : eMMC : DDR3 : ID : 90014A484247346132 : VEN : HYNIX | DEV : HBG4a2 : RAM : [ 3.00 GB ]
EMI : [01] : eMMC : DDR3 : ID : 90014A68423861503E : VEN : HYNIX | DEV : hB8aP> : RAM : [ 3.00 GB ]
EMI : [02] : eMMC : DDR3 : ID : 90014A484147346132 : VEN : HYNIX | DEV : HAG4a2 : RAM : [ 2.00 GB ]
EMI : [03] : eMMC : DDR3 : ID : 13014E53304A394237 : VEN : MICRON | DEV : S0J9B7 : RAM : [ 3.00 GB ]
EMI : [04] : eMMC : DDR3 : ID : 150100514536334D42 : VEN : SAMSUNG | DEV : QE63MB : RAM : [ 2.00 GB ]
EMI : [05] : eMMC : DDR3 : ID : 150100474436424D42 : VEN : SAMSUNG | DEV : GD6BMB : RAM : [ 3.00 GB ]
EMI : [06] : eMMC : DDR3 : ID : 13014E53304A394137 : VEN : MICRON | DEV : S0J9A7 : RAM : [ 2.00 GB ]
EMI : [07] : eMMC : DDR3 : ID : 150100524836344142 : VEN : SAMSUNG | DEV : RH64AB : RAM : [ 4.00 GB ]
EMI : [08] : eMMC : DDR3 : ID : 90014A484347386134 : VEN : HYNIX | DEV : HCG8a4 : RAM : [ 4.00 GB ]
EMI : [09] : eMMC : DDR3 : ID : 150100514436334D42 : VEN : SAMSUNG | DEV : QD63MB : RAM : [ 2.00 GB ]
EMI : [0A] : eMMC : DDR3 : ID : 150100475036424D42 : VEN : SAMSUNG | DEV : GP6BMB : RAM : [ 3.00 GB ]

Operation : Identify [ v2.17 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM44)
MODE : BOOTROM
PORT : 44
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN RAPHAEL
BROM : MEID : F8898C219B774F269288F2B7C359AB6A
BROM : SecLevel : 0x000000E7
BROM : SecMode : SBC+SLA+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v1944 | Manual : Enabled
BROM : SOCID : 8471A1403DC7065279B9A8A4E8919AE5527C3BA807681ADA96 D843F028B8CF6F
BROM : SLA : Local Auth
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : MT6765
EMI : SRC : preloader_cereus.bin
EMI : CNT : 000B
EMI : [00] : eMMC : DDR3 : ID : 90014A484247346132 : VEN : HYNIX | DEV : HBG4a2 : RAM : [ 3.00 GB ]
EMI : [01] : eMMC : DDR3 : ID : 90014A68423861503E : VEN : HYNIX | DEV : hB8aP> : RAM : [ 3.00 GB ]
EMI : [02] : eMMC : DDR3 : ID : 90014A484147346132 : VEN : HYNIX | DEV : HAG4a2 : RAM : [ 2.00 GB ]
EMI : [03] : eMMC : DDR3 : ID : 13014E53304A394237 : VEN : MICRON | DEV : S0J9B7 : RAM : [ 3.00 GB ]
EMI : [04] : eMMC : DDR3 : ID : 150100514536334D42 : VEN : SAMSUNG | DEV : QE63MB : RAM : [ 2.00 GB ]
EMI : [05] : eMMC : DDR3 : ID : 150100474436424D42 : VEN : SAMSUNG | DEV : GD6BMB : RAM : [ 3.00 GB ]
EMI : [06] : eMMC : DDR3 : ID : 13014E53304A394137 : VEN : MICRON | DEV : S0J9A7 : RAM : [ 2.00 GB ]
EMI : [07] : eMMC : DDR3 : ID : 150100524836344142 : VEN : SAMSUNG | DEV : RH64AB : RAM : [ 4.00 GB ]
EMI : [08] : eMMC : DDR3 : ID : 90014A484347386134 : VEN : HYNIX | DEV : HCG8a4 : RAM : [ 4.00 GB ]
EMI : [09] : eMMC : DDR3 : ID : 150100514436334D42 : VEN : SAMSUNG | DEV : QD63MB : RAM : [ 2.00 GB ]
EMI : [0A] : eMMC : DDR3 : ID : 150100475036424D42 : VEN : SAMSUNG | DEV : GP6BMB : RAM : [ 3.00 GB ]
EMI : Init EMI from PRELOADER
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00038000 [ 224.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: 13014E53304A3942371003EA5D1D5513
EMMC: VEN : MICRON | OEM : 4E01 | DEV : S0J9B7
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 9A42E445843C6E3263F417DC946C6487

DA : USB : HIGH-SPEED

Boot done!

Patch Level : O11019
Display ID : O11019
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2019-08-01
Build Time : 23.08.2019
Product Model : Redmi 6
Product Brand : xiaomi
Product Name : cereus
Product Device : cereus
Product Info : cereus
Product Manfct : Xiaomi
Board Platform : mt6765

USERDATA : FILESYSTEM : EXT4 with FDE ( Full Disk Encryption *)

NVRAM check : Passed!
NVRAM : SEC NORMAL [ No extra security ]

Backup sensetive data [ 11 ]
Backup path : Backup\MT6765__9A42E445843C6E3263F417DC946C6487\
[25] Read : NVRAM
[8] Read : NVDATA
[15] Read : PROINFO
[27] Read : LK
[7] Read : NVCFG
[10] Read : PROTECT1
[11] Read : PROTECT2
[13] Read : PERSIST
[0] Read : PRELOADER
[12] Read : SECCFG
Backup done!

STORAGE : LifeStatus : eMMC : OK!

Done!
Elapsed: 00:00:41

hariichha · 01-24-2021, 06:25

Quote:

Originally Posted by JayDi

XIAOMI 6A
XIAOMI 8 Pro
VIVO
HUAWEI

All test are made with default DA.
No preloader,
No auth,
No da has been selected.

Just sSLA option enabled and BROM mode.
That way allow you boot most of devices already.

Now a bit more possiblities open

EMI : DEV : MT6765
EMI : SRC : preloader_cereus.bin
EMI : CNT : 0008
EMI : [00] : eMMC : DDR3 : ID : 150100474436424D42 : VEN : SAMSUNG | DEV : GD6BMB : RAM : [ 3.00 GB ]
EMI : [01] : eMMC : DDR3 : ID : 13014E53304A394237 : VEN : MICRON | DEV : S0J9B7 : RAM : [ 3.00 GB ]
EMI : [02] : eMMC : DDR3 : ID : 90014A68423861503E : VEN : HYNIX | DEV : hB8aP> : RAM : [ 3.00 GB ]
EMI : [03] : eMMC : DDR3 : ID : 150100514536334D42 : VEN : SAMSUNG | DEV : QE63MB : RAM : [ 2.00 GB ]
EMI : [04] : eMMC : DDR3 : ID : 90014A484147346132 : VEN : HYNIX | DEV : HAG4a2 : RAM : [ 2.00 GB ]
EMI : [05] : eMMC : DDR3 : ID : 150100524836344142 : VEN : SAMSUNG | DEV : RH64AB : RAM : [ 4.00 GB ]
EMI : [06] : eMMC : DDR3 : ID : 90014A484347386134 : VEN : HYNIX | DEV : HCG8a4 : RAM : [ 4.00 GB ]
EMI : [07] : eMMC : DDR3 : ID : 150100475036424D42 : VEN : SAMSUNG | DEV : GP6BMB : RAM : [ 3.00 GB ]

Preloader [HW DEV] Info :
EMI : DEV : MT6765
EMI : SRC : preloader_cereus.bin
EMI : CNT : 0008
EMI : [00] : eMMC : DDR3 : ID : 150100474436424D42 : VEN : SAMSUNG | DEV : GD6BMB : RAM : [ 3.00 GB ]
EMI : [01] : eMMC : DDR3 : ID : 13014E53304A394237 : VEN : MICRON | DEV : S0J9B7 : RAM : [ 3.00 GB ]
EMI : [02] : eMMC : DDR3 : ID : 90014A68423861503E : VEN : HYNIX | DEV : hB8aP> : RAM : [ 3.00 GB ]
EMI : [03] : eMMC : DDR3 : ID : 150100514536334D42 : VEN : SAMSUNG | DEV : QE63MB : RAM : [ 2.00 GB ]
EMI : [04] : eMMC : DDR3 : ID : 90014A484147346132 : VEN : HYNIX | DEV : HAG4a2 : RAM : [ 2.00 GB ]
EMI : [05] : eMMC : DDR3 : ID : 150100524836344142 : VEN : SAMSUNG | DEV : RH64AB : RAM : [ 4.00 GB ]
EMI : [06] : eMMC : DDR3 : ID : 90014A484347386134 : VEN : HYNIX | DEV : HCG8a4 : RAM : [ 4.00 GB ]
EMI : [07] : eMMC : DDR3 : ID : 150100475036424D42 : VEN : SAMSUNG | DEV : GP6BMB : RAM : [ 3.00 GB ]

Operation : Write Flash [ v2.17 ]

Repartition : Enabled
Flash Verify : Disabled
Reg.Pre-Erase : Enabled
Verify HW/SW : Enabled
SData Backup : Enabled
Safe UserData : Disabled
Flash Format : Disabled

Files :21
[FL] : Set : preloader_cereus.bin
[FL] : Set : recovery.img
[FL] : Set : md1img.img
[FL] : Set : spmfw.img
[FL] : Set : scp.img
[FL] : Set : scp.img
[FL] : Set : sspm.img
[FL] : Set : sspm.img
[FL] : Set : vbmeta.img
[FL] : Set : lk.img
[FL] : Set : lk.img
[FL] : Set : boot.img
[FL] : Set : logo.bin
[FL] : Set : odmdtbo.img
[FL] : Set : cust.img
[FL] : Set : tee.img
[FL] : Set : tee.img
[FL] : Set : vendor.img
[FL] : Set : system.img
[FL] : Set : cache.img
[FL] : Set : userdata.img

[FL] : Total size : 0xC2336484 [ 3.03 GB ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM30)
MODE : BOOTROM
PORT : 30
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN RAPHAEL
BROM : MEID : F8898C219B774F269288F2B7C359AB6A
BROM : SecLevel : 0x000000E7
BROM : SecMode : SBC+SLA+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v1944 | Manual : Enabled
BROM : SOCID : 8471A1403DC7065279B9A8A4E8919AE5527C3BA807681ADA96 D843F028B8CF6F
BROM : SLA : Local Auth
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : MT6765
EMI : SRC : preloader_cereus.bin
EMI : CNT : 0008
EMI : [00] : eMMC : DDR3 : ID : 150100474436424D42 : VEN : SAMSUNG | DEV : GD6BMB : RAM : [ 3.00 GB ]
EMI : [01] : eMMC : DDR3 : ID : 13014E53304A394237 : VEN : MICRON | DEV : S0J9B7 : RAM : [ 3.00 GB ]
EMI : [02] : eMMC : DDR3 : ID : 90014A68423861503E : VEN : HYNIX | DEV : hB8aP> : RAM : [ 3.00 GB ]
EMI : [03] : eMMC : DDR3 : ID : 150100514536334D42 : VEN : SAMSUNG | DEV : QE63MB : RAM : [ 2.00 GB ]
EMI : [04] : eMMC : DDR3 : ID : 90014A484147346132 : VEN : HYNIX | DEV : HAG4a2 : RAM : [ 2.00 GB ]
EMI : [05] : eMMC : DDR3 : ID : 150100524836344142 : VEN : SAMSUNG | DEV : RH64AB : RAM : [ 4.00 GB ]
EMI : [06] : eMMC : DDR3 : ID : 90014A484347386134 : VEN : HYNIX | DEV : HCG8a4 : RAM : [ 4.00 GB ]
EMI : [07] : eMMC : DDR3 : ID : 150100475036424D42 : VEN : SAMSUNG | DEV : GP6BMB : RAM : [ 3.00 GB ]
EMI : Init EMI from PRELOADER
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00038000 [ 224.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]

EMMC: 13014E53304A3942371003EA5D1D5513
EMMC: VEN : MICRON | OEM : 4E01 | DEV : S0J9B7
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 9A42E445843C6E3263F417DC946C6487

DA : USB : HIGH-SPEED

Boot done!

[FL] : HW verification passed!

[FL] : Pre-Flash backup

Backup sensetive data [ 11 ]
Backup path : Backup\MT6765__9A42E445843C6E3263F417DC946C6487\
Backup done!

[FL] : Pre-Flash backup passed!

SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432

[FL] : Pre-Erase
Erase : 0x0000000000000000 : 0x0000000005688000
Erase : 0x0000000007688000 : 0x0000000006000000
Erase : 0x000000000E800000 : 0x0000000004A00000
Erase : 0x0000000013500000 : 0x0000000008980000
Erase : 0x000000001FE80000 : 0x00000001CB180000

[FL] : RePartition
[FL] : RePartition Ok!

[FL] : Flashing now ...

Write : PRELOADER
Update bootloader backup copy ...
Update bootloader backup copy Ok!
Write : RECOVERY
Write : MD1IMG
Write : SPMFW
Write : SCP1
Write : SCP2
Write : SSPM_1
Write : SSPM_2
Write : VBMETA
Write : LK
Write : LK2
Write : BOOT
Write : LOGO
Write : ODMDTBO
Write : CUST
FAIL : SEC : IMG TYPE MISMATCH
Write : TEE1
Write : TEE2
Write : VENDOR
Write : SYSTEM
Write : CACHE
Write : USERDATA

Ultra : Ok!

SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432

[FL] : RePartition
[FL] : RePartition Ok!

[FL] : Flashing finished!

Done!
Elapsed: 00:02:28

Reconnect Power/Cable!

shanawas_1 · 01-24-2021, 06:27

Quote:

Originally Posted by yellowboss

infinity chinese miracle-2 mtk/mediatek v2.17 - standalone auth on

as ordinary unique solutions by world famous infinity team !

core
changed : Protocol updated ( raphael/legacy )
newfeature: Standalone sla/auth [raphael] **
changed : Internal emi engine updated : Rapahel : Ufs support rebuild

flasher
changed: Core updated for raphael line
changed: Ultraflash feature updated, new security workarounds supported

service
changed: Identify
!* read new android 10 specific fields, vendor-specific fields
changed: Smart reset
!* optimized support for different customized and generic cases

changed: Hw report ( raphael - only )
!* ufs line devices now supported with following features:
- cid info ( flashic base info, name, vendor ) - default info, even if boot can nott be completed by some hw or sw reasons
- lifeinfo ( slc, mlc, eol status and use counters ) - allow understand how bad it feels
- rpmb info ( is it key programmed or clean and can be re-used )
- partitioning details and other
- hwreport log saving enabled ( for further analyze )
!* feature also allow automatic select and store for further use bootrom connection settings for raphael devices ( dram init )
!* hwreport not require complete boot in case of semi-dead devices. Useful for hwdebug
!* hwreport result may vary in diffirent models and agents even on the same soc !

firmware reader
changed : Some modern brand-specific changes ( xiaomi, oppo, vivo, realme )
changed : New types supported

other
bugfix : Many different minor changes and fixes
changed : Generic protocol rebuild

info
!**
- standalone sla/auth allow you ignore device security setting and allow boot it without having any da/auth/remote auth support
- you can boot ( with supported soc ) device with any generic da and perform any need operations
- support mt6765 - all security versions, no auth need, no special da need, no remote service need
support xiaomi, oppo, vivo, realme, huawei and whatever else existing
- support mt6785 - all security versions, no auth need, no special da need, no remote service need
support xiaomi, oppo, vivo, realme, huawei and whatever else existing

note: special boot-helper tool should be installed - included in cm2mt2 package

how to install:

important step !

dongle firmware version required: v0147

password for archive: 12345678

download link #1

download link #2

download link #3

how to upload files to support

infinity-box 16 years updates and support as nobody else since year 2005

redmi 6/6a mi account remove solution need team please help....

kamal_singla · 01-24-2021, 06:45

Quote:

Originally Posted by shanawas_1

redmi 6/6a mi account remove solution need team please help....

init memory tool erase or reflash persist (after that smart reset ) enough for remove mi account

Akhtar Ali Jatt · 01-24-2021, 06:54

Again World's 1st Update

azhergoga007 · 01-24-2021, 07:05

Again Rock Update
Fastan ur Seat belt

ranagaurav · 01-24-2021, 08:00

i face this problem i salect boot 1 by 1

Quote:

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM9)
MODE : BOOTROM
PORT : 9
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN RAPHAEL
BROM : MEID : C103DB77A8CEB360547A41AFC36019FE
BROM : SecLevel : 0x000000E7
BROM : SecMode : SBC+SLA+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : Xiaomi : 6A | Manual : Disabled
BROM : SOCID : FD225FB8973B0ED545628B9E8A1363813ED718247A522A90A5 E7C1D07674C567
BROM : SLA : Local Auth

BROM : Selected Auth/Cert not accepted by device!
>>> Check previous message for more info!

Reconnect Power/Cable!

Operation : Identify [ v2.17 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM9)
MODE : BOOTROM
PORT : 9
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN RAPHAEL
BROM : MEID : C103DB77A8CEB360547A41AFC36019FE
BROM : SecLevel : 0x000000E7
BROM : SecMode : SBC+SLA+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : Xiaomi : Dimensity [800][1000] | Manual : Disabled
BROM : SOCID : FD225FB8973B0ED545628B9E8A1363813ED718247A522A90A5 E7C1D07674C567
BROM : SLA : Local Auth

BROM : Selected Auth/Cert not accepted by device!
>>> Check previous message for more info!

Reconnect Power/Cable!

mozair33 · 01-24-2021, 08:02

attractive varey good job

mozair33

shanawas_1 · 01-24-2021, 08:04

Redmi 6a try again and again but not sucess please help please.....

PTFN : MediaTek USB Port_V1632 (COM50)
MODE : BOOTROM
PORT : 50
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN RAPHAEL
BROM : MEID : EDEB79F697ADE70947DAB697635AAFF8
BROM : SecLevel : 0x000000E7
BROM : SecMode : SBC+SLA+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : Xiaomi : 6A | Manual : Disabled
BROM : SOCID : 03AFB6A60BDB809A26B5846A50E1C35F79792ED17DCD63946E C1F049EF834A9A
BROM : SLA : Local Auth

BROM : Selected Auth/Cert not accepted by device!
>>> Check previous message for more info!

Reconnect Power/Cable!

yuranc8 · 01-24-2021, 08:17

“Don't aim for perfection. Aim for 'better than yesterday'.”

Thanks

yuranc8 · 01-24-2021, 08:19

Quote:

Originally Posted by JayDi

XIAOMI 6A
XIAOMI 8 Pro
VIVO
HUAWEI

All test are made with default DA.
No preloader,
No auth,
No da has been selected.

Just sSLA option enabled and BROM mode.
That way allow you boot most of devices already.

Now a bit more possiblities open

“What is perfect is challenging.”

sneha · 01-24-2021, 08:24

Quote:

Originally Posted by ranagaurav

i face this problem i salect boot 1 by 1

Just sSLA option enabled and BROM mode.

01-24-2021, 05:43	#16 (permalink)
princesaddam No Life Poster Join Date: Apr 2009 Location: Inside Infinity Posts: 1,688 Member: 1010626 Status: Offline Sonork: using fb Thanks Meter: 735	Always unique and world first now copy pasters get ready to copy and say world first PS: Iam wondering when ru sleeping take some rest also Sent from my vivo 1818 using Tapatalk

01-24-2021, 06:54	#23 (permalink)
Akhtar Ali Jatt No Life Poster Join Date: Jan 2009 Location: Sindh Pakistan Posts: 8,873 Member: 953334 Status: Offline Sonork: 100.1614005 Thanks Meter: 15,424	Again World's 1st Update

01-24-2021, 07:05	#24 (permalink)
azhergoga007 No Life Poster Join Date: Jan 2011 Location: lullipapi Posts: 8,670 Member: 1489030 Status: Offline Sonork: 100.1649409 Thanks Meter: 5,368	Again Rock Update Fastan ur Seat belt

01-24-2021, 08:02	#26 (permalink)
mozair33 Freak Poster Join Date: Jan 2016 Location: punjab pakistan Age: 34 Posts: 411 Member: 2510895 Status: Offline Sonork: 100.1668345 Thanks Meter: 319	attractive varey good job mozair33

01-24-2021, 08:04	#27 (permalink)
shanawas_1 No Life Poster Join Date: Jan 2012 Location: Satkhira khulna Bangladesh Posts: 808 Member: 1716947 Status: Offline Sonork: 100.1661965 Thanks Meter: 195	Redmi 6a try again and again but not sucess please help please..... PTFN : MediaTek USB Port_V1632 (COM50) MODE : BOOTROM PORT : 50 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 CODE : Cervino TYPE : MODERN RAPHAEL BROM : MEID : EDEB79F697ADE70947DAB697635AAFF8 BROM : SecLevel : 0x000000E7 BROM : SecMode : SBC+SLA+SDA+EXT BROM : BROM\|BL : 0x05\|0xFE BROM : BOOTROM MODE : Xiaomi : 6A \| Manual : Disabled BROM : SOCID : 03AFB6A60BDB809A26B5846A50E1C35F79792ED17DCD63946E C1F049EF834A9A BROM : SLA : Local Auth BROM : Selected Auth/Cert not accepted by device! >>> Check previous message for more info! Reconnect Power/Cable!

01-24-2021, 08:17	#28 (permalink)
yuranc8 No Life Poster Join Date: Feb 2017 Location: Quelimane Mz Age: 26 Posts: 2,209 Member: 2680008 Status: Offline Thanks Meter: 1,639	“Don't aim for perfection. Aim for 'better than yesterday'.” Thanks