GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 02-12-2021, 17:28   #151 (permalink)
No Life Poster
 
Join Date: Jul 2011
Posts: 529
Member: 1613469
Status: Offline
Thanks Meter: 192

Huawei MRD-LX3 2018/2019

Operation : Identify [ v2.21 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM21)
MODE : BOOTROM
PORT : 21
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
CODE : Merlot
TYPE : MODERN RAPHAEL
BROM : MEID : 6684B8FE62A4699CD76464F255C51260
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : Huawei : Y6_MRD-XXX | Manual : Enabled
BROM : SOCID : 4B7EB5CF216029FE6F229AA48A4B72E4FA959FE47888905C28 453214E8321ED5
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : MT6761
EMI : SRC : preloader_k61v1_64_mexico.bin
EMI : CNT : 000F
EMI : [00] : eMMC : DDR3 : ID : 90014A68423861503E : VEN : HYNIX | DEV : hB8aP> : RAM : [ 3,00 GB ]
EMI : [01] : eMMC : DDR3 : ID : 150100514536334D42 : VEN : SAMSUNG | DEV : QE63MB : RAM : [ 2,00 GB ]
EMI : [02] : eMMC : DDR3 : ID : 150100514436334D42 : VEN : SAMSUNG | DEV : QD63MB : RAM : [ 2,00 GB ]
EMI : [03] : eMMC : DDR3 : ID : 150100474436424D42 : VEN : SAMSUNG | DEV : GD6BMB : RAM : [ 3,00 GB ]
EMI : [04] : eMMC : DDR3 : ID : 90014A484147346132 : VEN : HYNIX | DEV : HAG4a2 : RAM : [ 2,00 GB ]
EMI : [05] : eMMC : DDR3 : ID : 13014E53304A394237 : VEN : MICRON | DEV : S0J9B7 : RAM : [ 3,00 GB ]
EMI : [06] : eMMC : DDR3 : ID : 13014E53304A394137 : VEN : MICRON | DEV : S0J9A7 : RAM : [ 2,00 GB ]
EMI : [07] : eMMC : DDR3 : ID : 90014A68433861503E : VEN : HYNIX | DEV : hC8aP> : RAM : [ 3,00 GB ]
EMI : [08] : eMMC : DDR3 : ID : 150100475036424D42 : VEN : SAMSUNG | DEV : GP6BMB : RAM : [ 3,00 GB ]
EMI : [09] : eMMC : DDR3 : ID : 90014A68423861503E : VEN : HYNIX | DEV : hB8aP> : RAM : [ 2,00 GB ]
EMI : [0A] : eMMC : DDR3 : ID : 150100525036344D42 : VEN : SAMSUNG | DEV : RP64MB : RAM : [ 4,00 GB ]
EMI : [0B] : eMMC : DDR3 : ID : 90014A684339615033 : VEN : HYNIX | DEV : hC9aP3 : RAM : [ 4,00 GB ]
EMI : [0C] : eMMC : DDR3 : ID : 150100475036424142 : VEN : SAMSUNG | DEV : GP6BAB : RAM : [ 3,00 GB ]
EMI : [0D] : eMMC : DDR3 : ID : 150100475836424142 : VEN : SAMSUNG | DEV : GX6BAB : RAM : [ 3,00 GB ]
EMI : [0E] : eMMC : DDR3 : ID : 150100515836334142 : VEN : SAMSUNG | DEV : QX63AB : RAM : [ 2,00 GB ]
EMI : Init EMI from PRELOADER
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00080000 [ 512,00 KB ]
DRAM: 0x80000000 [ 2,00 GB ]

EMMC: 150100514436334D420149609033B61B
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : QD63MB
EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x01000000 [ 16,00 MB ]
USER : 0x747C00000 [ 29,12 GB ]

CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

RNID : C1DE85A526710C4AD5D1EF069537C09A

DA : USB : FULL-SPEED
DA : USB : Change Port Speed
PTFN : MediaTek DA USB VCOM (Android) (COM38)
MODE : PRELOADER PORT
PORT : 38

Boot done!

Sec. Patch : 2020-05-05
Product Brand : alps
Product Name : full_k61v1_64_mex_a32
Product Device : k61v1_64_mex_a32
Board Platform : mt6761
Product Info : k61v1_64_mex_a32
Product Board : k61v1_64_mexico
Product Manfct : HUAWEI
Product Model : k61v1_64_mex_a32
Patch Level : PPR1.180610.011
Ver. CodeName : REL
Ver. Release : 9
Build Time : 08.05.2020
Product Model : HUAWEI
Product Manfct : alps

USERDATA : FILESYSTEM : F2FS with FBE ( File-Base Encryption )

NVRAM check : Passed!
NVRAM : SEC NORMAL [ No extra security ]

Backup sensetive data [ 15 ]
Backup path : Backup\MT6761__C1DE85A526710C4AD5D1EF069537C09A\
[14] Read : NVRAM
[5] Read : NVDATA
[10] Read : PROINFO
[26] Read : LK
[4] Read : NVCFG
[6] Read : PROTECT1
[7] Read : PROTECT2
[9] Read : PERSIST
[0] Read : PRELOADER
[8] Read : SECCFG
Backup done!


STORAGE : LifeStatus : eMMC : NOT implemented in selected DA!

Done!
Elapsed: 00:00:41
  Reply With Quote
The Following 4 Users Say Thank You to washipolar For This Useful Post:
Show/Hide list of the thanked
Old 02-12-2021, 17:28   #152 (permalink)
No Life Poster
 
Join Date: Jul 2011
Posts: 529
Member: 1613469
Status: Offline
Thanks Meter: 192
Huawei MRD-LX3 2018/2019

Backup sensetive data [ 15 ]
Backup path : Backup\MT6761__C1DE85A526710C4AD5D1EF069537C09A\
[14] Read : NVRAM
[5] Read : NVDATA
[10] Read : PROINFO
[26] Read : LK
[4] Read : NVCFG
[6] Read : PROTECT1
[7] Read : PROTECT2
[9] Read : PERSIST
[0] Read : PRELOADER
[8] Read : SECCFG
Backup done!


STORAGE : LifeStatus : eMMC : NOT implemented in selected DA!

Done!
Elapsed: 00:00:41
  Reply With Quote
The Following 2 Users Say Thank You to washipolar For This Useful Post:
Old 02-12-2021, 18:54   #153 (permalink)
Freak Poster
 
candelwizzy's Avatar
 
Join Date: Sep 2008
Location: Ghana Akatsi
Age: 39
Posts: 238
Member: 853308
Status: Offline
Thanks Meter: 34
Tecno KD7h Dead after flash

Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.21

Load IDBase v21168 Ok!


Preloader [HW DEV] Info :
EMI : DEV : MT6761
EMI : SRC : preloader_kd7h_h6210.bin
EMI : CNT : 0008
EMI : [00] : DRAM : LP_DDR4 : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 512.00 MB ]
EMI : [01] : DRAM : LP_DDR4 : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 3.00 GB ]
EMI : [02] : DRAM : LP_DDR4 : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 2.00 GB ]
EMI : [03] : DRAM : LP_DDR4 : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 2.00 GB ]
EMI : [04] : DRAM : LP_DDR4 : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 1.00 GB ]
EMI : [05] : DRAM : LP_DDR4 : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 3.00 GB ]
EMI : [06] : DRAM : LP_DDR4 : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 2.00 GB ]
EMI : [07] : DRAM : LP_DDR4 : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 2.00 GB ]

Operation : Write Flash [ v2.21 ]

Repartition : Disabled
Flash Verify : Disabled
Reg.Pre-Erase : Disabled
Verify HW/SW : Enabled
SData Backup : Disabled
Safe UserData : Disabled
Flash Format : Disabled

Files :23
[FL] : Set : preloader_kd7h_h6210.bin
[FL] : Set : tkv.img
[FL] : Set : recovery.img
[FL] : Set : md1img-verified.img
[FL] : Set : spmfw-verified.img
[FL] : Set : scp-verified.img
[FL] : Set : scp-verified.img
[FL] : Set : sspm-verified.img
[FL] : Set : sspm-verified.img
[FL] : Set : lk-verified.img
[FL] : Set : lk-verified.img
[FL] : Set : boot.img
[FL] : Set : logo-verified.bin
[FL] : Set : dtbo-verified.img
[FL] : Set : tee-verified.img
[FL] : Set : tee-verified.img
[FL] : Set : vbmeta.img
[FL] : Set : vbmeta_system.img
[FL] : Set : vbmeta_vendor.img
[FL] : Set : super.img
[FL] : Set : cache.img
[FL] : Set : tranfs.img
[FL] : Set : userdata.img

[FL] : Total size : 0xCED728B0 [ 3.23 GB ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM5)
MODE : PRELOADER PORT
PORT : 5
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
CODE : Merlot
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0xFF|0x03
BROM : PRELOADER PORT
MODE : TECNO : SEC_MIXED | Manual : Disabled
BROM : SOCID : 9FCE9FF0D2A07DC2DECB38A9D0E7B1DC576E57CD9F079079E8 BCA3176EA2D1CC
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]

EMMC: 880103534C4433324755063C96249625
EMMC: VEN : FORESEE | OEM : 301 | DEV : SLD32G
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x73A000000 [ 28.91 GB ]

CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 6804DFCFB25DC4E373259B9A74763B73

DA : USB : HIGH-SPEED

Boot done!

[FL] : HW verification passed!

SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432


[FL] : Flashing now ...

Write : PRELOADER
Update bootloader backup copy ...
Update bootloader backup copy Ok!
Write : TKV
FAIL : SEC : IMG TYPE MISMATCH
ERR : 0xC002002A
ERR : SEC : IMG TYPE MISMATCH
ERR : 0x00100000|0x00100000

Error : Flashing failed!
>>> Seems as something wrong with device! Check battery charge and device state!

Reconnect Power/Cable!

Any solution? Help please
  Reply With Quote
Old 02-12-2021, 19:45   #154 (permalink)
No Life Poster
 
Join Date: Jan 2006
Posts: 505
Member: 217170
Status: Offline
Thanks Meter: 37
my infinity after update only open in logo and terminate why????
  Reply With Quote
Old 02-12-2021, 22:10   #155 (permalink)
No Life Poster
 
Join Date: Oct 2011
Location: Nigeria
Posts: 6,508
Member: 1677653
Status: Offline
Thanks Meter: 2,713
Quote:
Originally Posted by sampit View Post
my infinity after update only open in logo and terminate why????
What is your windows operating system and bit?
  Reply With Quote
Old 02-13-2021, 00:12   #156 (permalink)
No Life Poster
 
Join Date: Jan 2006
Posts: 505
Member: 217170
Status: Offline
Thanks Meter: 37
Windows 7 pro 64 bit
  Reply With Quote
Old 02-13-2021, 07:57   #157 (permalink)
No Life Poster
 
JayDi's Avatar
 
Join Date: Mar 2007
Posts: 18,526
Member: 462970
Status: Offline
Thanks Meter: 20,309
Quote:
Originally Posted by sampit View Post
my infinity after update only open in logo and terminate why????
Check is there is NO fault.bin file in software folder first.
  Reply With Quote
Old 02-13-2021, 07:57   #158 (permalink)
No Life Poster
 
JayDi's Avatar
 
Join Date: Mar 2007
Posts: 18,526
Member: 462970
Status: Offline
Thanks Meter: 20,309
Quote:
Originally Posted by chitawira View Post
Mr Yellow boss i tried to repair my imei 2 on my redmi note 9 and here is the log below

Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.21

Load IDBase v210169 Ok!

Update configuration ...
Update Ok!
Load IDBase v210169 Ok!

Operation : Repair Security [ v2.21 ]
Mode : META

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM10)
MODE : PRELOADER PORT
PORT : 10
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
INIT : META confirmed!

Boot done!

AP_CHIP : MT6768
AP_SWTM : Thu May 28 17:58:51 CST 2020
AP_DSPP : merlin[gl]
AP_SWVR : alps-mp-q0.mp1.tc8sp2-V1.9.1_huaqin.q0mp1.k69v1.64_P34
MD_CHIP : MT6768
MD_SWTM : 2000.00.00
MD_DSPV : 1.0
MD_DSPP : MOLY.LR12A.R3.MP.V98.P37
MD_SWVR : HUAQIN_Q0MP1_MT6769_SP_HW
MD_HWVR : Unknown

IMEI[0] : [ ERASED ]
IMEI[1] : [ ERASED ]

IMEI[1] : 86922805203xxxxx
Item : update Failed! [ 0xFFFF ]

Done!
Elapsed: 00:01:04

Reconnect Power/Cable!
Use ENG FW

or
BROM mode + sSLA.
  Reply With Quote
Old 02-13-2021, 07:58   #159 (permalink)
No Life Poster
 
JayDi's Avatar
 
Join Date: Mar 2007
Posts: 18,526
Member: 462970
Status: Offline
Thanks Meter: 20,309
Quote:
Originally Posted by candelwizzy View Post
Code:
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.21

Load IDBase v21168 Ok!


Preloader [HW DEV] Info : 
 EMI : DEV : MT6761
 EMI : SRC : preloader_kd7h_h6210.bin
 EMI : CNT : 0008
 EMI : [00] : DRAM : LP_DDR4 : ID : NOT_DEFINED : VEN : UNKNOWN   | DEV :  : RAM : [ 512.00 MB ]
 EMI : [01] : DRAM : LP_DDR4 : ID : NOT_DEFINED : VEN : UNKNOWN   | DEV :  : RAM : [ 3.00 GB ]
 EMI : [02] : DRAM : LP_DDR4 : ID : NOT_DEFINED : VEN : UNKNOWN   | DEV :  : RAM : [ 2.00 GB ]
 EMI : [03] : DRAM : LP_DDR4 : ID : NOT_DEFINED : VEN : UNKNOWN   | DEV :  : RAM : [ 2.00 GB ]
 EMI : [04] : DRAM : LP_DDR4 : ID : NOT_DEFINED : VEN : UNKNOWN   | DEV :  : RAM : [ 1.00 GB ]
 EMI : [05] : DRAM : LP_DDR4 : ID : NOT_DEFINED : VEN : UNKNOWN   | DEV :  : RAM : [ 3.00 GB ]
 EMI : [06] : DRAM : LP_DDR4 : ID : NOT_DEFINED : VEN : UNKNOWN   | DEV :  : RAM : [ 2.00 GB ]
 EMI : [07] : DRAM : LP_DDR4 : ID : NOT_DEFINED : VEN : UNKNOWN   | DEV :  : RAM : [ 2.00 GB ]

Operation : Write Flash [ v2.21 ]

Repartition   : Disabled
Flash Verify  : Disabled
Reg.Pre-Erase : Disabled
Verify HW/SW  : Enabled
SData Backup  : Disabled
Safe UserData : Disabled
Flash Format  : Disabled

Files :23
[FL] : Set : preloader_kd7h_h6210.bin
[FL] : Set : tkv.img
[FL] : Set : recovery.img
[FL] : Set : md1img-verified.img
[FL] : Set : spmfw-verified.img
[FL] : Set : scp-verified.img
[FL] : Set : scp-verified.img
[FL] : Set : sspm-verified.img
[FL] : Set : sspm-verified.img
[FL] : Set : lk-verified.img
[FL] : Set : lk-verified.img
[FL] : Set : boot.img
[FL] : Set : logo-verified.bin
[FL] : Set : dtbo-verified.img
[FL] : Set : tee-verified.img
[FL] : Set : tee-verified.img
[FL] : Set : vbmeta.img
[FL] : Set : vbmeta_system.img
[FL] : Set : vbmeta_vendor.img
[FL] : Set : super.img
[FL] : Set : cache.img
[FL] : Set : tranfs.img
[FL] : Set : userdata.img

[FL] : Total size : 0xCED728B0 [ 3.23 GB ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM5)
MODE : PRELOADER PORT
PORT : 5
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
     CODE : Merlot
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000005
BROM : SecMode  : SBC+SDA
BROM : BROM|BL  : 0xFF|0x03
BROM : PRELOADER PORT
MODE : TECNO : SEC_MIXED | Manual : Disabled
BROM : SOCID : 9FCE9FF0D2A07DC2DECB38A9D0E7B1DC576E57CD9F079079E8BCA3176EA2D1CC
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: 880103534C4433324755063C96249625
        EMMC: VEN : FORESEE | OEM : 301 | DEV : SLD32G
        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x73A000000 [ 28.91 GB ]

        CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 6804DFCFB25DC4E373259B9A74763B73

DA : USB : HIGH-SPEED

Boot done!

[FL] : HW verification passed!

SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432


[FL] : Flashing now ... 

Write : PRELOADER
Update bootloader backup copy ... 
Update bootloader backup copy Ok!
Write : TKV
FAIL : SEC : IMG TYPE MISMATCH
ERR : 0xC002002A
ERR : SEC : IMG TYPE MISMATCH
ERR : 0x00100000|0x00100000

Error : Flashing failed!
>>> Seems as something wrong with device! Check battery charge and device state!

Reconnect Power/Cable!
Any solution? Help please
Just enable PM update and repeat.
  Reply With Quote
The Following User Says Thank You to JayDi For This Useful Post:
Old 02-13-2021, 10:48   #160 (permalink)
Freak Poster
 
Join Date: Mar 2014
Location: PAKISTAN
Posts: 241
Member: 2145475
Status: Offline
Thanks Meter: 100
Vivo y30 (vivo 1938) patron lock remove done with cm2mt2




Operation : Reset Settings/Format FS [ v2.21 ]
Mode : SMART RESET
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM26)
MODE : BOOTROM
PORT : 26
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN RAPHAEL
BROM : MEID : 14886C084D899BD097E8EF8304E1A432
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : Vivo : SEC_MT6765 | Manual : Disabled
BROM : SOCID : 8545F3F70663BF10B6DB0A8700AA3E63CF628AAF7F9A5FA6BD 589188592BF948
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : INFINITY
EMI : SRC : PRELOADER_INFINITY_0
EMI : CNT : 0001
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0x30000000 [ 768.00 MB ]

EMMC: 13014E53304A394B3910037CEE0D570B
EMMC: VEN : MICRON | OEM : 4E01 | DEV : S0J9K9
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0x1D1F000000 [ 116.48 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 421DE674A8DD120D872DFC526F999E6

DA : USB : HIGH-SPEED

Boot done!

SmartInfo : 0x825757

Format Ok : USERDATA
Format Ok : CACHE
Format Ok : RESET PROTECTION
Format Ok : USERDATA

Done!
Elapsed: 00:00:46

Reconnect Power/Cable!
  Reply With Quote
The Following 6 Users Say Thank You to azaanali For This Useful Post:
Show/Hide list of the thanked
Old 02-13-2021, 10:55   #161 (permalink)
Insane Poster
 
Join Date: Nov 2019
Location: Ukraine
Posts: 84
Member: 2935191
Status: Offline
Thanks Meter: 75
Huawei Y5 2018 (DRA-L21) SMART RESET done

Operation : Reset Settings/Format FS [ v2.21 ]
Mode : SMART RESET
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM26)
MODE : BOOTROM
PORT : 26
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Zion
TYPE : MODERN RAPHAEL
BROM : MEID : 1094996FDAAAAF8F8D8CBF58CB888154
BROM : SecLevel : 0x000000E3
BROM : SecMode : SBC+SLA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2044 | Manual : Disabled
BROM : SOCID : FC1D985DA1E07FE057ABA067B9E8CB183217A9CCF34FE51F07 42AF0FC862257F
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : INFINITY
EMI : SRC : PRELOADER_INFINITY_0
EMI : CNT : 0004
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00020000 [ 128,00 KB ]
DRAM: 0x80000000 [ 2,00 GB ]

EMMC: 150100514536334D4203A7A6688035AB
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : QE63MB
EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x00400000 [ 4,00 MB ]
USER : 0x3A3E00000 [ 14,56 GB ]

CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 925050A2ACE00B96795186525347E96C

DA : USB : HIGH-SPEED

Boot done!

SmartInfo : 0x805657

Format Ok : USERDATA
Format Ok : CACHE
Format Ok : RESET PROTECTION
Format Ok : USERDATA

Done!
Elapsed: 00:01:24

Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to bikers90 For This Useful Post:
Old 02-13-2021, 11:10   #162 (permalink)
Insane Poster
 
Join Date: Nov 2019
Location: Ukraine
Posts: 84
Member: 2935191
Status: Offline
Thanks Meter: 75
Y5 2018 (DRA-L21) Read FW unsuccessfully

Operation : Read Firmware [ v2.21 ]

ExtSparse : Enabled
ForceRead : Enabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM26)
MODE : BOOTROM
PORT : 26
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Zion
TYPE : MODERN RAPHAEL
BROM : MEID : 1094996FDAAAAF8F8D8CBF58CB888154
BROM : SecLevel : 0x000000E3
BROM : SecMode : SBC+SLA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2044 | Manual : Disabled
BROM : SOCID : FC1D985DA1E07FE057ABA067B9E8CB183217A9CCF34FE51F07 42AF0FC862257F
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : INFINITY
EMI : SRC : PRELOADER_INFINITY_0
EMI : CNT : 0004
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00020000 [ 128,00 KB ]
DRAM: 0x80000000 [ 2,00 GB ]

EMMC: 150100514536334D4203A7A6688035AB
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : QE63MB
EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x00400000 [ 4,00 MB ]
USER : 0x3A3E00000 [ 14,56 GB ]

CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 925050A2ACE00B96795186525347E96C

DA : USB : HIGH-SPEED

Boot done!

Patch Level : O11019
Display ID : B007
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2020-08-01
Build Time : 07.08.2020
Product Model : DRA-L21
Product Brand : HUAWEI
Product Name : DRA-L21
Product Device : HWDRA-M
Product Manfct : HUAWEI
Product Info : dura64
Product Board : DRA-L21
Board Platform : mt6739

MT6739__HUAWEI__DRA-L21__8.1.0__B007__O11019__dura64

Unsupport : 0x0000000005F00000 : 0x0000000000010000 : reserve0


Error : Device NOT supported for SAFE READ!
>>> Send log and report.log (if exists) to support! Include device info also!

Reconnect Power/Cable!
  Reply With Quote
Old 02-13-2021, 11:15   #163 (permalink)
Insane Poster
 
Join Date: Nov 2019
Location: Ukraine
Posts: 84
Member: 2935191
Status: Offline
Thanks Meter: 75
Y5 2018 (DRA-L21) Read Security

Operation : Read Security [ v2.21 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port_V1632 (COM26)
MODE : BOOTROM
PORT : 26
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Zion
TYPE : MODERN RAPHAEL
BROM : MEID : 1094996FDAAAAF8F8D8CBF58CB888154
BROM : SecLevel : 0x000000E3
BROM : SecMode : SBC+SLA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2044 | Manual : Disabled
BROM : SOCID : FC1D985DA1E07FE057ABA067B9E8CB183217A9CCF34FE51F07 42AF0FC862257F
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : INFINITY
EMI : SRC : PRELOADER_INFINITY_0
EMI : CNT : 0004
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00020000 [ 128,00 KB ]
DRAM: 0x80000000 [ 2,00 GB ]

EMMC: 150100514536334D4203A7A6688035AB
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : QE63MB
EMMC:
BOOT1 : 0x00400000 [ 4,00 MB ]
BOOT2 : 0x00400000 [ 4,00 MB ]
RPMB : 0x00400000 [ 4,00 MB ]
USER : 0x3A3E00000 [ 14,56 GB ]

CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 925050A2ACE00B96795186525347E96C

DA : USB : HIGH-SPEED

Boot done!


NVRAM check : Passed!

NVRAM : SEC NORMAL [ No extra security ]
NVM saved as : MT6739__eMMC__.mt_sec
NVM saved to : D:\ТЕЛЕФОН\Прошивки\HUAWEI\Y5 2018\DRA-L21 back CM2!!!\nvram\

Done!
Elapsed: 00:01:26

Reconnect Power/Cable!
  Reply With Quote
The Following User Says Thank You to bikers90 For This Useful Post:
Old 02-13-2021, 11:19   #164 (permalink)
Insane Poster
 
Join Date: Nov 2019
Location: Ukraine
Posts: 84
Member: 2935191
Status: Offline
Thanks Meter: 75
Y5 2018 (DRA-L21) NVRAM backUp CM2

MT6739__eMMC__
  Reply With Quote
The Following User Says Thank You to bikers90 For This Useful Post:
Old 02-13-2021, 11:27   #165 (permalink)
Insane Poster
 
Join Date: Apr 2018
Posts: 85
Member: 2829176
Status: Offline
Thanks Meter: 2
not opening with my dongle
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 11:10.



Powered by Searchlight © 2023 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2023 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2022 -
Page generated in 0.28259 seconds with 8 queries

SEO by vBSEO