GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 08-12-2020, 10:05   #1 (permalink)
Product Supporter
 
Join Date: Jun 2009
Posts: 29,186
Member: 1043909
Status: Offline
Thanks Meter: 54,526
Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.06 - Android 10, FastRead, FastFlash


Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.06 - Android 10, FastRead, FastFlash

As ordinary, unique functions and methods released

Core

Changed : FlashCore Protocol updated
Changed : DiagCore Protocol updated
Changed : NAND protocol adaptation
Changed : Operations speed increased

Flasher
Changed : Flash Engine updated
Changed : Handling for 64bit files optimized
Changed : Activated FastFlash V1 protocol *
Changed : Activated FastFlash V2 protocol *
!* FastFlash protocol allow increase flashing speed for big unsparsed images
!* FastFlash protocol reduce flashing time up to 4-6 times, depend on device configuration - 3-4 minutes against 20-25
!* FastFlash activated automatically, if can be performed
!* GOOD USB cable and GOOD USB port must be used - do not use USB HUBs !
Changed : Support for new PAC formats activated: v2.x.x line

Service
Changed : Identify scheme : Read more accurate and complete info *
!* Include modern Android 9 and Android 10 devices
Changed : Precise FileSystem settings detection ( Type and Encryption algo )
Changed : Better security detection
Changed : Format FS / Reset settings updated

Firmware Reader
Changed : Reading speed up to 30% faster ! *
!* Test feature, support modern UniSoc devices: SC7731E, SC9832E, SC9863
!* Test feature, only RS-featured loaders supported !
Changed : Android 10 support activated! *
!* Support latest Android 9 and modern Android 10 devices from now!
!* Allow read complete firmware image from Android 10 devices without loss any ota/vendor abilities
Changed : X64 devices/loaders native support activated for complete reading
Changed : SW now create Android-version depend images for better compatibility
Changed : SW now create correct FileSystems bundle according device settings *
!* Almost reducing "hang" case after flashing
Changed : Improved structure identification
Changed : Support more different types
Changed : Structure identification and NAND reader more stable now (complete E-series NAND adaptation is on the way)

Model DB
Changed : New loaders included for various set of devices
Changed : New Generic loaders included and updated existing ones

Other
Changed : Removed outdated options from platform tab, many options changed to atomatic mode
BugFix : Minor changes and fixes

Info
Android 10 enabled devices : SC7731E, SC9832E, SC9863
FastFlash enabled devices : SC9832E, SC9863


Download link #1

Download link #2

Download link #3


How to upload files to support

Infinity-Box 15 years updates and support as nobody else since year 2005




  Reply With Quote
The Following 59 Users Say Thank You to YellowBoss For This Useful Post:
Show/Hide list of the thanked
Old 08-12-2020, 10:33   #2 (permalink)
Insane Poster
 
Join Date: Nov 2013
Posts: 71
Member: 2075865
Status: Offline
Thanks Meter: 16
excellent. keep it up, now remain SP lock for latest model like ZTE L130 SC7731E android 9, nokia c1 (Ta-1162) it is becoming more challenging to us these days, we have heaps and heaps of them.
  Reply With Quote
Old 08-12-2020, 11:39   #3 (permalink)
Freak Poster
 
Join Date: Sep 2015
Location: SINDH, PAKISTAN.
Posts: 470
Member: 2452939
Status: Offline
Thanks Meter: 189
Really awesome speed Thank you infinity Team.

Operation : Identify [ v2.06 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731G_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
Kick FDL again ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : MRA58K
Display ID : J106_V04-B_Infinity_blade_V1.0_20190905
Ver. Incmt : root-103233
Ver. CodeName : REL
Ver. Release : 8.1
Sec. Patch : 2016-07-01
Build Time : 1567679979
Product Brand : android_1
Product Name : Infinity_blade
Product Device : Infinity_blade
Product Board : sp7731gea_hdr
Product Manfct : android_1
Board Platform : sc8830
Product Info : Infinity_blade
Product Model : Infinity blade


Platform Version: MOCORTM_14B_MP_7731G_W17.22.4_Debug
Project Version: sc7731g_CP0_modem
BASE Version: TM_BASE_W17.22.4
MMI Version: sc7731g_modem
HW Version: sc7731g_CP0_modem
CMP_Time : 05-31-2017 21:23:59

MODEM TAG : MOCORTM_14B_MP_7731G_W17.22.4_Debug_TM_BASE_W17.22 .4_sc7731g_CP0_modem_sc7731g_CP0_modem_sc7731g_mod em




Done!
Elapsed: 00:00:52

Operation : Format FS / Reset Settings [ v2.06 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731G_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
Kick FDL again ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP

Reconnect Power/Cable!


Done!
Elapsed: 00:01:18

Operation : Read FW [ v2.06 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731G_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
Kick FDL again ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : MRA58K
Display ID : J106_V04-B_Infinity_blade_V1.0_20190905
Ver. Incmt : root-103233
Ver. CodeName : REL
Ver. Release : 8.1
Sec. Patch : 2016-07-01
Build Time : 1567679979
Product Brand : android_1
Product Name : Infinity_blade
Product Device : Infinity_blade
Product Board : sp7731gea_hdr
Product Manfct : android_1
Board Platform : sc8830
Product Info : Infinity_blade
Product Model : Infinity blade

AndroidVer : 8
VlnrLevel : 0x01

SC8830__android_1__Infinity_blade__8.1__J106_V04-B_Infinity_blade_V1.0_20190905__MRA58K__Infinity_b lade

Read : prodnv.img
ExtSparse : Compression ratio : 85%
Read : phase.cfg
Read : wmodem.bin
Read : wdsp.bin
Read : wnvitem.bin
Read : modem_wcn.img
Read : wcnnvitem.bin
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Read : logo2.bin
Read : logo3.bin
Read : logo4.bin
Read : logo5.bin
Read : boot.img
Read : system.img
ExtSparse : Compression ratio : 88%
Make : persist.img
Read : sysinfo.bin
ExtSparse : Compression ratio : 6%
Make : cache.img
Read : recovery.img
Make : userdata.img
Read : u-boot.bin
Read : u-boot-spl.bin

Firmware size : 0x4E79385C ( 1.23 GiB )
Android Info saved : _Android_info.txt
Reconnect Power/Cable!


Done!
Elapsed: 00:06:00
  Reply With Quote
The Following 7 Users Say Thank You to GSM SINDH For This Useful Post:
Show/Hide list of the thanked
Old 08-12-2020, 11:57   #4 (permalink)
Product Supporter
 
Join Date: Jun 2009
Posts: 29,186
Member: 1043909
Status: Offline
Thanks Meter: 54,526
Quote:
Originally Posted by kngoya View Post
excellent. keep it up, now remain SP lock for latest model like ZTE L130 SC7731E android 9, nokia c1 (Ta-1162) it is becoming more challenging to us these days, we have heaps and heaps of them.
Work about more features is in progress
  Reply With Quote
The Following User Says Thank You to YellowBoss For This Useful Post:
Old 08-12-2020, 12:11   #5 (permalink)
No Life Poster
 
gracy_elec's Avatar
 
Join Date: Feb 2005
Location: GSM WORLD
Posts: 2,001
Member: 118520
Status: Offline
Thanks Meter: 3,401
Smile LAVA A97 IPS AND:6.0 SC9832A READ NVRM BAG BRUSH HANG ON LOGO Done

SUCCESSFULLY READ NVRM BAG BRUSH HANG ON LOGO(LAVA A97 IPS AND:6.0 SC9832A)


Operation : Identify [ v2.06 ]
BootMode : FLASH


1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC983x_BASE : SC9832A_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : MRA58K
Display ID : Lava_A97_IPS_S114_20170807
Ver. Incmt : 81
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2017-07-05
Build Time : 1502097769
Product Model : A97 IPS
Product Brand : Lava
Product Name : A97
Product Device : A97
Product Board : sp9832a_2h11_volte
Product Manfct : Lava
Board Platform : sc8830
Product Info : A97


NVMng : SecurityInfo
IMEI[1] : 91XXXXXXXXXX49
IMEI[2] : 91XXXXXXXXXX48
IMEI[3] : 35XXXXXXXXXX93
WIFIMAC : FFFFFFFFFFFF
BT_MAC : FFFFFFFFFFFF
SEC : SLS:0, SKS:0, SKV:0

Platform Version: MOCORTM_W15.7.2_Debug
Project Version: sharkl_cp1
BASE Version: FM_BASE_16B_Release_W16.36.4_P14
HW Version: sc9630_modem
CMP_Time : 03-30-2017 15:43:35

MODEM TAG : MOCORTM_W15.7.2_Debug_FM_BASE_16B_Release_W16.36.4 _P14_sc9630_modem_sharkl_cp1

UserData : STATE : PLAIN [EXTFS]



Done!
Elapsed: 00:01:04

Operation : Read NVM [ v2.06 ]
BootMode : FLASH


1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC983x_BASE : SC9832A_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

NVMng : SecurityInfo
IMEI[1] : 91XXXXXXXXXX49
IMEI[2] : 91XXXXXXXXXX48
IMEI[3] : 35XXXXXXXXXX93
WIFIMAC : FFFFFFFFFFFF
BT_MAC : FFFFFFFFFFFF
SEC : SLS:0, SKS:0, SKV:0

NVMng : Backup Ok , 0x0006B19C

Platform Version: MOCORTM_W15.7.2_Debug
Project Version: sharkl_cp1
BASE Version: FM_BASE_16B_Release_W16.36.4_P14
HW Version: sc9630_modem
CMP_Time : 03-30-2017 15:43:35

MODEM TAG : MOCORTM_W15.7.2_Debug_FM_BASE_16B_Release_W16.36.4 _P14_sc9630_modem_sharkl_cp1


Reconnect Power/Cable!


Done!
Elapsed: 00:00:51

Operation : Format FS / Reset Settings [ v2.06 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH


1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC983x_BASE : SC9832A_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP


Reconnect Power/Cable!


Done!
Elapsed: 00:00:32




Operation : Identify [ v2.06 ]
BootMode : FLASH


1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Lava : A97 IPS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : MRA58K
Display ID : Lava_A97_IPS_S114_20170807
Ver. Incmt : 81
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2017-07-05
Build Time : 1502097769
Product Model : A97 IPS
Product Brand : Lava
Product Name : A97
Product Device : A97
Product Board : sp9832a_2h11_volte
Product Manfct : Lava
Board Platform : sc8830
Product Info : A97


NVMng : SecurityInfo
IMEI[1] : 91XXXXXXXXXX49
IMEI[2] : 91XXXXXXXXXX48
IMEI[3] : 35XXXXXXXXXX93
WIFIMAC : FFFFFFFFFFFF
BT_MAC : FFFFFFFFFFFF
SEC : SLS:0, SKS:0, SKV:0

Platform Version: MOCORTM_W15.7.2_Debug
Project Version: sharkl_cp1
BASE Version: FM_BASE_16B_Release_W16.36.4_P14
HW Version: sc9630_modem
CMP_Time : 03-30-2017 15:43:35

MODEM TAG : MOCORTM_W15.7.2_Debug_FM_BASE_16B_Release_W16.36.4 _P14_sc9630_modem_sharkl_cp1

UserData : STATE : PLAIN [EXTFS]



Done!
Elapsed: 00:00:55

Operation : Format FS / Reset Settings [ v2.06 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH


1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Lava : A97 IPS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP


Reconnect Power/Cable!


Done!
Elapsed: 00:00:33



THANKS INFINITY-BOX TEAM
  Reply With Quote
The Following 3 Users Say Thank You to gracy_elec For This Useful Post:
Show/Hide list of the thanked
Old 08-12-2020, 12:39   #6 (permalink)
Freak Poster
 
Join Date: May 2009
Location: Zimbabwe
Posts: 206
Member: 1038694
Status: Offline
Sonork: 86
Thanks Meter: 28
good update but we have a problem inifinty team whats the problem with adding SP UNLOCK?SP UNLOCK was last added on V1.27 and only unlocks android 7 and below.Now we are forced to buy other tools like NCK that unlocks all generic and non generic spd chips upto android 10 for free.
  Reply With Quote
Old 08-12-2020, 12:44   #7 (permalink)
Major Poster
 
Join Date: Dec 2010
Location: taguig city
Posts: 41
Member: 1461576
Status: Offline
Sonork: philhealth 01-025808264-3
Thanks Meter: 7
Donate money to this user
Thank you team cm2 sir request update qualcom
  Reply With Quote
The Following 2 Users Say Thank You to daffs For This Useful Post:
Old 08-12-2020, 12:58   #8 (permalink)
Product Supporter
 
Join Date: Jun 2009
Posts: 29,186
Member: 1043909
Status: Offline
Thanks Meter: 54,526
Quote:
Originally Posted by moses caston View Post
good update but we have a problem inifinty team whats the problem with adding SP UNLOCK?....
There is no problem at all.
If you think it's easy to create good working software you are always welcome to upload your software here. Your exe will be uploaded to Infinity support area for all users and you can add to your software all functions that you want and of course your banners, photos and links to your facebook page.
Please let me know as soon as you will be ready to send me software for test.

btw, as you can see Infinity Team always release unique features that others can not do at all.
  Reply With Quote
The Following 6 Users Say Thank You to YellowBoss For This Useful Post:
Show/Hide list of the thanked
Old 08-12-2020, 13:01   #9 (permalink)
Product Supporter
 
Join Date: Jun 2009
Posts: 29,186
Member: 1043909
Status: Offline
Thanks Meter: 54,526
Quote:
Originally Posted by daffs View Post
Thank you team cm2 sir request update qualcom
Yes sir, your request about qualcomm (that you have posted in SPD thread) will be forwarded to qlm research department ASAP.
  Reply With Quote
The Following 5 Users Say Thank You to YellowBoss For This Useful Post:
Show/Hide list of the thanked
Old 08-12-2020, 14:38   #10 (permalink)
Junior Member
 
Join Date: Aug 2016
Location: mymensingh bangladish
Posts: 15
Member: 2606732
Status: Offline
Thanks Meter: 6
boom boom update tnx team....plz update qlm tool
  Reply With Quote
The Following User Says Thank You to elias456 For This Useful Post:
Old 08-12-2020, 14:48   #11 (permalink)
Freak Poster
 
Join Date: Jul 2011
Posts: 483
Member: 1613469
Status: Offline
Thanks Meter: 157
excellent update as always
  Reply With Quote
Old 08-12-2020, 15:00   #12 (permalink)
No Life Poster
 
malka4u's Avatar
 
Join Date: Aug 2011
Location: Jhapa,Nepal
Posts: 2,550
Member: 1626780
Status: Offline
Thanks Meter: 853
Thanks 4 update and best wishes.

Quote:
Originally Posted by YellowBoss View Post
Yes sir, your request about qualcomm will be forwarded to qlm research department ASAP.
Best of luck for this department. May be theydo their job before corona vaccine release
  Reply With Quote
The Following 3 Users Say Thank You to malka4u For This Useful Post:
Show/Hide list of the thanked
Old 08-12-2020, 16:03   #13 (permalink)
Freak Poster
 
Zaki Bouzidson's Avatar
 
Join Date: Nov 2014
Location: Algeria
Posts: 123
Member: 2287326
Status: Offline
Thanks Meter: 25
Quote:
Originally Posted by gracy_elec View Post
SUCCESSFULLY READ NVRM BAG BRUSH HANG ON LOGO(LAVA A97 IPS AND:6.0 SC9832A)

SUCCESS REPORT CREATED LOADER BY BRUSH TOOL V2.06


THANKS INFINITY-BOX TEAM

Sir What do you mean by 'Brush' tool I find this word a lot especially when translating from chinese to english lol
  Reply With Quote
Old 08-12-2020, 17:18   #14 (permalink)
Insane Poster
 
Join Date: Sep 2019
Location: Mozambique
Posts: 61
Member: 2927861
Status: Offline
Thanks Meter: 7
Good update The newly added services are useful, but there is another very important function that SP unlock should implement this option in future updates please, I know it is not easy to develop but it should create efforts to satisfy customers even more
  Reply With Quote
The Following User Says Thank You to Khadaff_papillo For This Useful Post:
Old 08-12-2020, 17:43   #15 (permalink)
No Life Poster
 
kamal_singla's Avatar
 
Join Date: Jun 2014
Location: Bharat
Age: 27
Posts: 4,220
Member: 2211790
Status: Offline
Thanks Meter: 4,174
Quote:
Originally Posted by Zaki Bouzidson View Post
Sir What do you mean by 'Brush' tool I find this word a lot especially when translating from chinese to english lol
Brush = Flash/reflash Chinese use this word most
  Reply With Quote
The Following User Says Thank You to kamal_singla For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 19:25.



Powered by Searchlight © 2020 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.45154 seconds with 7 queries

SEO by vBSEO