GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   Infinity-Box (https://forum.gsmhosting.com/vbb/f296/)
-   -   Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.07 - UltraReading & New Features (https://forum.gsmhosting.com/vbb/f296/infinity-chinese-miracle-2-sp2-spd-unisoc-v2-07-ultrareading-new-features-2895316/)

YellowBoss 09-04-2020 09:25

Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.07 - UltraReading & New Features
 
Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.07 - UltraReading & New Features activated

As ordinary, unique functions and methods released

Core
Changed : FlashCore Protocol updated
BugFix : SC9832E line support updated
BugFix : SC9820E line support updated
BugFix : SC9863x line support updated
NewFeature : eMMC ReadOnly check for DLv4 and later ( automatic during boot )
Changed : All service features speed under FlashMode increased

Flasher
Changed : Flash Engine updated
Changed : FastFlash protocol updated

Service
BugFix [Identify] : FS state detection may fail for legacy SPD line, fixed
Changed [Identify] : SelfLearn / Automatic DB update during "Identify" rebuild
Changed [Identify] : Support detection of AES and RSA-enabled auth in devices/loaders
Changed [Identify] : Support correct BASE <-> DEVICE verification for optimal loader selection
BugFix [Read Privacy] : Privacy Lock reading on some devices may fail , fixed
NewFeature [Read Privacy] : Mobile AntiTheft password reading ( another version of "privacy lock" )
BugFix [Format FS] : Fixed Format FS in DiagMode for Android 10 and modern Android 9 devices

Firmware Reader
Changed : Complete FWReader rebuild to cover most count of different devices, existing on market *
!* Almost all Flashing issues has been fixed, FWRead repeat required for problematic cases/models!
Changed : UltraReading option activated ! *
!* Now reading of UniSoc devices 3-5 times faster, than before
- approx 20 mins instead of 70 for SC9853i (2.2 GiB) comparing to older releases
- approx 12 mins instead of 40 for SC9832E (2.5 GiB) comparing to older releases
- approx 20 mins instead of 60 for SC9863 (4.4 GiB) comparing to older releases
- approx 15 mins instead of 50 for SC7731 (1.5 GiB) comparing to older releases
!* Most generic loaders now support FastReading ( RS,SS,0S,1S,2S )
- Use USB-2 port !
- DO NOT use USB-3 port !
- DO NOT use USB-HUB !
Changed : Improved structure identification
Changed : Support more different types
Changed : Android 10 devices support improved

Model DB
Changed : New Generic loaders included and updated existing ones
Changed : SC9820E(eMMC), SC9832E, SC9863x loaders updated

Other
BugFix : Minor changes and fixes
Changed : Power Reset/Switch off scenario operation-depend now
Option : GUI ( File -> GUI ) : Allow select other interface mode*
!* Default interface - standard V2 line GUI
!* Wide interface - best for big screen / big distance to monitor
!* Wide log - extend log window to screen size - optimal for most cases


Download link #1

Download link #2

Download link #3


How to upload files to support

Infinity-Box 15 years updates and support as nobody else since year 2005




https://www.infinity-box.com/cdn/tg48.png https://www.infinity-box.com/cdn/yt48.png https://www.infinity-box.com/cdn/fb48.png https://www.infinity-box.com/cdn/tw48.png https://www.infinity-box.com/cdn/ios2-48.png https://www.infinity-box.com/cdn/j48.png

Oyetunde Semiu 09-04-2020 11:06

Booooooooooooooooooooom update
Thank *** for successful update.

faisal05 09-04-2020 11:49

Always good updates many box i have I'm no more using


But this is awesome

I like you team keep it up

nasch 09-04-2020 13:15

Thanks team f the update. We wait for Qualcomm module update.

reedson 09-04-2020 14:02

Thanks for New Features
SP Line long awaited

sneha 09-04-2020 14:24

Quote:

Originally Posted by YellowBoss (Post 14206999)
- Use USB-2 port !
- DO NOT use USB-3 port !
- DO NOT use USB-HUB !


mean USB 2.0 port good for SPD and 3.0 not good ?

Noorgsmserver 09-04-2020 15:09

Palace add option rebuild firmware SC to PCK file

kngoya 09-04-2020 20:07

Service
BugFix [Identify] : FS state detection may fail for legacy SPD line, fixed
Changed [Identify] : SelfLearn / Automatic DB update during "Identify" rebuild
Changed [Identify] : Support detection of AES and RSA-enabled auth in devices/loaders
Changed [Identify] : Support correct BASE <-> DEVICE verification for optimal loader selection
BugFix [Read Privacy] : Privacy Lock reading on some devices may fail , fixed
NewFeature [Read Privacy] : Mobile AntiTheft password reading ( another version of "privacy lock" )
BugFix [Format FS] : Fixed Format FS in DiagMode for Android 10 and modern Android 9 devices

Thanks for fixing privacy lock, now awaits SP Lock for mordern phones.

raymonmillimo 09-04-2020 20:38

Thank for Good apdate, but still waiting for sp unlock
please activate it if possible

alimobile279 09-05-2020 06:59

NewFeature : eMMC ReadOnly check for DLv4 and later ( automatic during boot )
tnax save time feature

zeeshan ali 786 09-05-2020 07:32

Always good update and best work... Thanks

JayDi 09-05-2020 07:39

10 minutes or so, now it comfort to use :)
Code:

Operation : Identify [ v2.07 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_512MB_SS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0002
FDL : Control transfered!

Boot Done!

Device info :
Patch Level    : OPM2.171019.012
Display ID    : PSP3406DUO.20180830.1.0.00
Ver. Incmt    : 35414
Ver. CodeName  : REL
Ver. Release  : 8.1.0
Sec. Patch    : 2018-08-05
Build Time    : 30.08.2018
Product Model  : PSP3406DUO
Product Brand  : Prestigio
Product Name  : PSP3406DUO
Product Device : IN39B3G
Product Manfct : Prestigio
Product Info  : PSP3406DUO
Product Board  : SC7731E
Board Platform : sp7731e


NVMng  : SecurityInfo
IMEI[1] : 35xxxxxxxxxxxxx
IMEI[2] : 35xxxxxxxxxxxxx
IMEI[3] : 86xxxxxxxxxxxxx
WIFIMAC : FFFFFFFFFFFF
BT_MAC  : FFFFFFFFFFFF
SEC : SLS:0, SKS:0, SKV:4

Platform Version: MOCORTM_17C_W18.23.4_P2_Debug
Project Version:  pike2_pub
BASE  Version:    FM_BASE_17C_W18.23.4_P2
HW Version:        sc7731e_modem

MODEM TAG : MOCORTM_17C_W18.23.4_P2_Debug_FM_BASE_17C_W18.23.4_P2_sc7731e_modem_pike2_pub

USERDATA : FILESYSTEM : F2FS  with FDE ( Full Disk Encryption ***)

 - > INFO : Remove cable from device to switch it off!

Done!
Elapsed: 00:00:56

Code:

Operation : Read FW [ v2.07 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_512MB_SS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0002
FDL : Control transfered!

Boot Done!

Device info :
Patch Level    : OPM2.171019.012
Display ID    : PSP3406DUO.20180830.1.0.00
Ver. Incmt    : 35414
Ver. CodeName  : REL
Ver. Release  : 8.1.0
Sec. Patch    : 2018-08-05
Build Time    : 30.08.2018
Product Model  : PSP3406DUO
Product Brand  : Prestigio
Product Name  : PSP3406DUO
Product Device : IN39B3G
Product Manfct : Prestigio
Product Info  : PSP3406DUO
Product Board  : SC7731E
Board Platform : sp7731e

AndroidVer : 8
VlnrLevel : 0x00

SP7731E__Prestigio__PSP3406DUO__8.1.0__PSP3406DUO.20180830.1.0.00__OPM2.171019.012__PSP3406DUO

Read : prodnv.img
ExtSparse : Compression ratio : 13%
Read : phase.cfg
Read : recovery.img
Read : tos.bin
Read : sml.bin
Read : u-boot.bin
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Read : nvitem_w.bin
Make : persist.img
Read : gnssmodem.bin
Read : gnssbdmodem.bin
Read : modem_wcn.img
Read : modem_w.bin
Read : gdsp_w.bin
Read : pm_sys.bin
Read : boot.img
Read : system.img
ExtSparse : Compression ratio : 91%
Make : cache.img
Read : vendor.img
ExtSparse : Compression ratio : 47%
Read : vbmeta.img
Make : userdata.img
Read : u-boot-spl.bin

Firmware size : 0x60049168 ( 1,50 GiB )
Android Info saved : _Android_info.txt
Reconnect Power/Cable!

Done!
Elapsed: 00:10:34

Code:

Open : SPD_PROG.xml
Reading package ...
Read package finished!

Created by Infinity-Box (c) 2020
Chinese Miracle II : Spreadtrum / UniSoc Service Module
Device Info file  : _Android_info.txt

Patch Level    : OPM2.171019.012
Display ID    : PSP3406DUO.20180830.1.0.00
Ver. Incmt    : 35414
Ver. CodeName  : REL
Ver. Release  : 8.1.0
Sec. Patch    : 2018-08-05
Build Time    : 30.08.2018
Product Model  : PSP3406DUO
Product Brand  : Prestigio
Product Name  : PSP3406DUO
Product Device : IN39B3G
Product Manfct : Prestigio
Product Info  : PSP3406DUO
Product Board  : SC7731E
Board Platform : sp7731e

SECSolution : MODERN [RS/0S/1S/2S]
 
Operation : Flash Firmware [ v2.07 ]

Setting  : Update NVRAM : True
Setting  : Force NVRAM : False
Setting  : Update PMT  : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0002
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x20
PMTMng : Update PMT Ok!

NVRM  : nvitem_w.bin
NVMng  : Load 0x30
NVMng  : Init SRC
NVMng  : SecurityInfo
IMEI[1] : 35xxxxxxxxxxxxxx
IMEI[2] : 35xxxxxxxxxxxxxx
IMEI[3] : 86xxxxxxxxxxxxxx
WIFIMAC : FFFFFFFFFFFF
BT_MAC  : FFFFFFFFFFFF
SEC : SLS:0, SKS:0, SKV:4

NVMng  : Backup Ok , 0x00066B20
NVMng  : Init DST
NVMng  : Rx10 : Wx0F
NVMng  : NVM block updated!

FSIMG  : prodnv.img
CODE  : recovery.img
CODE  : tos.bin
CODE  : tos.bin
CODE  : sml.bin
CODE  : sml.bin
UBOOT  : u-boot.bin
UBOOT  : u-boot.bin
CODE  : boot_logo.bmp
CODE  : fastboot_logo.bmp
FSIMG  : persist.img
CODE  : gnssmodem.bin
CODE  : gnssbdmodem.bin
CODE  : modem_wcn.img
CODE  : modem_w.bin
CODE  : gdsp_w.bin
CODE  : pm_sys.bin
CODE  : boot.img
FSIMG  : system.img
FSIMG  : cache.img
FSIMG  : vendor.img
CODE  : vbmeta.img
CODE  : vbmeta.img
FSIMG  : userdata.img
UBOOT  : u-boot-spl.bin
ERASE : MISC
ERASE : UBOOT_LOG
ERASE : FLASH_W
Flashing finished!
Reconnect Power/Cable!

Done!
Elapsed: 00:04:32


JayDi 09-05-2020 07:42

QIN lines and others rare things, and most common now work without problems
Code:

Operation : Identify [ v2.07 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9820E_BASE : SC9820e_eMMC_512MB_SS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0002
FDL : Control transfered!

Boot Done!

Device info :
Patch Level    : KTU84P
Display ID    : A350_10B_DUOQIN_CUST_V02_20180726_1520
Ver. Incmt    : 88
Ver. CodeName  : REL
Ver. Release  : 4.4.4
Build Time    : 26.09.2019
Product Model  : Qin 1s+
Product Brand  : QIN
Product Name  : sp9820e_1h10_native
Product Device : sp9820e_1h10
Product Board  : sp9820e_1h10
Product Manfct : duoqin
Board Platform : sp9820e
Product Info  : sp9820e_1h10


NVMng  : SecurityInfo
IMEI[1] : 86xxxxxxxxxxxx
IMEI[2] : 86xxxxxxxxxxxx
IMEI[3] : 86xxxxxxxxxxxx
WIFIMAC : FFFFFFFFFFFF
BT_MAC  : FFFFFFFFFFFF
SEC : SLS:0, SKS:0, SKV:4

Platform Version: MOCORTM_17B_Release_W19.14.2_Debug
Project Version:  sharkle_Feature_Phone
BASE  Version:    FM_BASE_17B_Release_W19.14.2
HW Version:        sc9820e_modem

MODEM TAG : MOCORTM_17B_Release_W19.14.2_Debug_FM_BASE_17B_Release_W19.14.2_sc9820e_modem_sharkle_Feature_Phone

UserData : STATE : PLAIN [EXTFS]

 - > INFO : Remove cable from device to switch it off!

Done!
Elapsed: 00:00:48

Code:

Operation : Read FW [ v2.07 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9820E_BASE : SC9820e_eMMC_512MB_SS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0002
FDL : Control transfered!

Boot Done!

Device info :
Patch Level    : KTU84P
Display ID    : A350_10B_DUOQIN_CUST_V02_20180726_1520
Ver. Incmt    : 88
Ver. CodeName  : REL
Ver. Release  : 4.4.4
Build Time    : 26.09.2019
Product Model  : Qin 1s+
Product Brand  : QIN
Product Name  : sp9820e_1h10_native
Product Device : sp9820e_1h10
Product Board  : sp9820e_1h10
Product Manfct : duoqin
Board Platform : sp9820e
Product Info  : sp9820e_1h10

AndroidVer : 4
VlnrLevel : 0x00

SP9820E__duoqin__Qin_1s+__4.4.4__A350_10B_DUOQIN_CUST_V02_20180726_1520__KTU84P__sp9820e_1h10

Read : prodnv.img
Read : phase.cfg
Read : recovery.img
Read : tos.bin
Read : sml.bin
Read : u-boot.bin
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Read : nvitem_l.bin
Read : gnssmodem.bin
Read : gnssbdmodem.bin
Read : modem_wcn.img
Make : persist.img
Read : modem_l.bin
Read : deltanv_l.bin
Read : gdsp_l.bin
Read : ldsp_l.bin
Read : pm_sys.bin
Read : boot.img
Read : system.img
Make : cache.img
Make : userdata.img
Read : u-boot-spl.bin

Firmware size : 0x1CE450D8 ( 462,27 MiB )
Android Info saved : _Android_info.txt
Reconnect Power/Cable!

Done!
Elapsed: 00:03:27

Code:

Open : SPD_PROG.xml
Reading package ...
Read package finished!

Created by Infinity-Box (c) 2020
Chinese Miracle II : Spreadtrum / UniSoc Service Module
Device Info file  : _Android_info.txt

Patch Level    : KTU84P
Display ID    : A350_10B_DUOQIN_CUST_V02_20180726_1520
Ver. Incmt    : 88
Ver. CodeName  : REL
Ver. Release  : 4.4.4
Build Time    : 26.09.2019
Product Model  : Qin 1s+
Product Brand  : QIN
Product Name  : sp9820e_1h10_native
Product Device : sp9820e_1h10
Product Board  : sp9820e_1h10
Product Manfct : duoqin
Board Platform : sp9820e
Product Info  : sp9820e_1h10

SECSolution : LEGACY [SS]


Operation : Flash Firmware [ v2.07 ]

Setting  : Update NVRAM : True
Setting  : Force NVRAM : False
Setting  : Update PMT  : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0002
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x1F
PMTMng : Update PMT Ok!

NVRM  : nvitem_l.bin
NVMng  : Load 0x30
NVMng  : Init SRC
NVMng  : SecurityInfo
IMEI[1] : 86xxxxxxxxxxxx
IMEI[2] : 86xxxxxxxxxxxx
IMEI[3] : 86xxxxxxxxxxxx
WIFIMAC : FFFFFFFFFFFF
BT_MAC  : FFFFFFFFFFFF
SEC : SLS:0, SKS:0, SKV:4

NVMng  : Backup Ok , 0x000C61D8
NVMng  : Init DST
NVMng  : Rx28 : Wx27
NVMng  : NVM block updated!

FSIMG  : prodnv.img
CODE  : recovery.img
CODE  : tos.bin
CODE  : tos.bin
CODE  : sml.bin
CODE  : sml.bin
UBOOT  : u-boot.bin
UBOOT  : u-boot.bin
CODE  : boot_logo.bmp
CODE  : fastboot_logo.bmp
CODE  : gnssmodem.bin
CODE  : gnssbdmodem.bin
CODE  : modem_wcn.img
FSIMG  : persist.img
CODE  : modem_l.bin
CODE  : deltanv_l.bin
CODE  : gdsp_l.bin
CODE  : ldsp_l.bin
CODE  : pm_sys.bin
CODE  : boot.img
FSIMG  : system.img
FSIMG  : cache.img
FSIMG  : userdata.img
UBOOT  : u-boot-spl.bin
ERASE : MISC
ERASE : FLASH_L
ERASE : UBOOT_LOG
Flashing finished!
Reconnect Power/Cable!

Done!
Elapsed: 00:01:19


JayDi 09-05-2020 07:44

AntiTheft lock reading activated for more Trannsion devices ( itel/infinix/and etc )
Code:

Operation : Read PrivacyLock [ v2.07 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_512MB_RS_LOW
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0002
FDL : Control transfered!

Boot Done!

PASSWORD : 123456789012

Reconnect Power/Cable!

Done!
Elapsed: 00:00:30


JayDi 09-05-2020 07:46

More Android 10 devices ( seems as almost all exisiting ) are covered
Code:

Operation : Identify [ v2.07 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9863x_BASE : SC9863A_eMMC_3GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL :  EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

Device info :
Product Brand  : Philips
Product Device : S266
Product Model  : Xenium S266
Product Name  : S266_RU
Patch Level    : QP1A.190711.020
Display ID    : Philips_S266_2024_V03_RU
Ver. Incmt    : 23310
Ver. CodeName  : REL
Ver. Release  : 10
Sec. Patch    : 2020-06-05
Build Time    : 10.06.2020
Product Info  : S266_RU
Product Board  : sp9863a_1h10
Board Platform : sp9863a
Product Manfct : Philips


NVMng  : SecurityInfo
IMEI[1] : 86xxxxxxxxxxxxxxx
IMEI[2] : 86xxxxxxxxxxxxxxx
IMEI[3] : 86xxxxxxxxxxxxxxx

SEC : SLS:0, SKS:0, SKV:4

Platform Version: MOCORTM_18B_W20.21.5_Debug
Project Version:  sharkl3_pub
BASE  Version:    FM_BASE_18B_W20.21.5
HW Version:        sc9863A_modem
CMP_Time : 05-22-2020 09:14:00

MODEM TAG : MOCORTM_18B_W20.21.5_Debug_FM_BASE_18B_W20.21.5_sc9863A_modem_sharkl3_pub

USERDATA : FILESYSTEM : F2FS  with FDE ( Full Disk Encryption ***)

 - > INFO : Remove cable from device to switch it off!

Done!
Elapsed: 00:02:00

Code:

Operation : Read FW [ v2.07 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9863x_BASE : SC9863A_eMMC_3GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL :  EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

Device info :
Product Brand  : Philips
Product Device : S266
Product Model  : Xenium S266
Product Name  : S266_RU
Patch Level    : QP1A.190711.020
Display ID    : Philips_S266_2024_V03_RU
Ver. Incmt    : 23310
Ver. CodeName  : REL
Ver. Release  : 10
Sec. Patch    : 2020-06-05
Build Time    : 10.06.2020
Product Info  : S266_RU
Product Board  : sp9863a_1h10
Board Platform : sp9863a
Product Manfct : Philips

AndroidVer : 10
VlnrLevel : 0x02

SP9863A__10__Philips_S266_2024_V03_RU__QP1A.190711.020__S266_RU

Read : u-boot.bin
Read : sml.bin
Read : tos.bin
Read : teecfg.bin
Read : vbmeta.img
Read : vbmeta_system.img
Read : vbmeta_vendor.img
Read : dtbo.img
Read : ldsp_l.bin
Read : gdsp_l.bin
Read : modem_l.bin
Read : nvitem_l.bin
Read : deltanv_l.bin
Read : modem_wcn.img
Read : gnssmodem.bin
Read : gnssbdmodem.bin
Read : pm_sys.bin
Read : boot.img
Read : recovery.img
Make : persist.img
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Read : socko.img
ExtSparse : Compression ratio : 55%
Read : odmko.img
ExtSparse : Compression ratio : 14%
Make : userdata.img
Make : cache.img
Read : prodnv.img
ExtSparse : Compression ratio : 21%
Read : udc_config.bin
Read : phase.cfg
Read : super.img
Read : u-boot-spl.bin

Waiting for device ...
ADB : Device found!
ADB : Connected!
ADB : Prepare Ok!
Looking for a troubles ...
Waiting for a miracle ...
Found bear!

Firmware size : 0xD63A0764 ( 3,35 GiB )
Android Info saved : _Android_info.txt
Reconnect Power/Cable!

Done!
Elapsed: 00:20:52

Code:

Open : SPD_PROG.xml
Reading package ...
Read package finished!

Created by Infinity-Box (c) 2020
Chinese Miracle II : Spreadtrum / UniSoc Service Module
Device Info file  : _Android_info.txt

Product Brand  : Philips
Product Device : S266
Product Model  : Xenium S266
Product Name  : S266_RU
Patch Level    : QP1A.190711.020
Display ID    : Philips_S266_2024_V03_RU
Ver. Incmt    : 23310
Ver. CodeName  : REL
Ver. Release  : 10
Sec. Patch    : 2020-06-05
Build Time    : 10.06.2020
Product Info  : S266_RU
Product Board  : sp9863a_1h10
Board Platform : sp9863a
Product Manfct : Philips

SECSolution : MODERN [RS/0S/1S/2S]


Operation : Flash Firmware [ v2.07 ]

Setting  : Update NVRAM : True
Setting  : Force NVRAM : False
Setting  : Update PMT  : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL :  EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x2A
PMTMng : Update PMT Ok!

NVRM  : nvitem_l.bin
NVMng  : Load 0x30
NVMng  : Init SRC
NVMng  : SecurityInfo
IMEI[1] : 86xxxxxxxxxxx
IMEI[2] : 86xxxxxxxxxxx
IMEI[3] : 86xxxxxxxxxxx

SEC : SLS:0, SKS:0, SKV:4

NVMng  : Backup Ok , 0x000C6348
NVMng  : Init DST
NVMng  : Rx2A : Wx29
NVMng  : NVM block updated!

UBOOT  : u-boot.bin
UBOOT  : u-boot.bin
CODE  : sml.bin
CODE  : sml.bin
CODE  : tos.bin
CODE  : tos.bin
CODE  : teecfg.bin
CODE  : teecfg.bin
CODE  : vbmeta.img
CODE  : vbmeta.img
CODE  : vbmeta_system.img
CODE  : vbmeta_vendor.img
CODE  : dtbo.img
CODE  : ldsp_l.bin
CODE  : gdsp_l.bin
CODE  : modem_l.bin
CODE  : deltanv_l.bin
CODE  : modem_wcn.img
CODE  : gnssmodem.bin
CODE  : gnssbdmodem.bin
CODE  : pm_sys.bin
CODE  : boot.img
CODE  : recovery.img
FSIMG  : persist.img
CODE  : boot_logo.bmp
CODE  : fastboot_logo.bmp
FSIMG  : socko.img
FSIMG  : odmko.img
FSIMG  : userdata.img
FSIMG  : cache.img
FSIMG  : prodnv.img
CODE  : udc_config.bin
CODE  : super.img
UBOOT  : u-boot-spl.bin
ERASE : FLASH_L
ERASE : MISC
ERASE : UBOOT_LOG
ERASE : SYSDUMPDB
ERASE : METADATA
Flashing finished!
Reconnect Power/Cable!

Done!
Elapsed: 00:03:11



All times are GMT +1. The time now is 15:38.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -

Page generated in 0.38722 seconds with 5 queries

SEO by vBSEO