GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   Infinity-Box (https://forum.gsmhosting.com/vbb/f296/)
-   -   Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.07 - UltraReading & New Features (https://forum.gsmhosting.com/vbb/f296/infinity-chinese-miracle-2-sp2-spd-unisoc-v2-07-ultrareading-new-features-2895316/)

JayDi 09-05-2020 07:49

Recent FDL versions allow make eMMC checks.
Code:

Operation : Identify [ v2.07 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9863x_BASE : SC9863A_eMMC_3GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL :  EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

Device info :
Product Brand  : Philips
Product Device : S266
Product Model  : Xenium S266
Product Name  : S266_RU
Patch Level    : QP1A.190711.020
Display ID    : Philips_S266_2024_V03_RU
Ver. Incmt    : 23310
Ver. CodeName  : REL
Ver. Release  : 10
Sec. Patch    : 2020-06-05
Build Time    : 10.06.2020
Product Info  : S266_RU
Product Board  : sp9863a_1h10
Board Platform : sp9863a
Product Manfct : Philips


NVMng  : SecurityInfo
IMEI[1] : 86xxxxxxxxxxxxxxx
IMEI[2] : 86xxxxxxxxxxxxxxx
IMEI[3] : 86xxxxxxxxxxxxxxx

SEC : SLS:0, SKS:0, SKV:4

Platform Version: MOCORTM_18B_W20.21.5_Debug
Project Version:  sharkl3_pub
BASE  Version:    FM_BASE_18B_W20.21.5
HW Version:        sc9863A_modem
CMP_Time : 05-22-2020 09:14:00

MODEM TAG : MOCORTM_18B_W20.21.5_Debug_FM_BASE_18B_W20.21.5_sc9863A_modem_sharkl3_pub

USERDATA : FILESYSTEM : F2FS  with FDE ( Full Disk Encryption ***)

 - > INFO : Remove cable from device to switch it off!

Done!
Elapsed: 00:02:00

Where is most useful :
Code:

FDL :  EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
We will adapt existing agents for some lines to support that feature too in next updates, as well with eMMC separate test and DRAM test.

JayDi 09-05-2020 07:51

PrivacyLock reading fixed and working as should :
Code:

Operation : Read PrivacyLock [ v2.07 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9863x_BASE : SC9863A_eMMC_3GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL :  EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

PASSWORD : 7zzzzzz6
CONTACTS : +9zzzzzzzzzzz7

Reconnect Power/Cable!

Done!
Elapsed: 00:00:26


JayDi 09-05-2020 08:02

Itnerface settings can be found in File.
Wide mode allow scale SW proportionally, when you have discomfort, when using monitor at distance or it have big resolution.


WideLog - most usefull, scale log to rest of desktop space and scale it a bit.


https://i.ibb.co/Q6C28jV/1.jpg
https://i.ibb.co/XpPkx18/2.jpg

Malik Shani G 09-05-2020 08:31

good update team.......

Arslanmayo 09-05-2020 09:06

good update as always

Yusuf Lawal 09-05-2020 11:49

If not JAYDI SIR, WHO COULD BE?

WORLD BEST CODER.....

mbiborna 09-05-2020 11:49

Quote:

Originally Posted by JayDi (Post 14207538)
Itnerface settings can be found in File.
Wide mode allow scale SW proportionally, when you have discomfort, when using monitor at distance or it have big resolution.


WideLog - most usefull, scale log to rest of desktop space and scale it a bit.


https://i.ibb.co/Q6C28jV/1.jpg
https://i.ibb.co/XpPkx18/2.jpg

Good options please other exe too......

elias456 09-05-2020 15:51

spd best update in the world tnx team,,,,,,,plz update qlm tool

Ohara1984 09-06-2020 09:33

now awaits SP Lock for mordern phones

YellowBoss 09-06-2020 11:45

Quote:

Originally Posted by mbiborna (Post 14207667)
Good options please other exe too......

Yes, other software modules will be updated one-by-one

Faith M banda 09-07-2020 10:27

That's what we call hard work

onz 09-07-2020 10:40

great update now we wait for SP unlock button

dany_boy 09-07-2020 12:36

Mi One Write Flash Failed
 
Mi One V3 Failed to write flash what is the problem . Battery is full charged .
Cable is good but not able to flash this phone .

Phone state at hang on logo also try with whole format flash even try with older ver of cm sp2 2.6 but same error


Card found : BC555F6F , v0145
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.07

Load IDBase v8331 Ok!


Open : SPD_PROG.xml
Reading package ...
Read package finished!

Created by Infinity-Box (c) 2020
Chinese Miracle II : Spreadtrum / UniSoc Service Module
Device Info file : _Android_info.txt

Patch Level : MRA58K
Display ID : J106G_Mione_V3_B15_V001_20191207
Ver. Incmt : root-103233
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2016-07-01
Build Time : 1575700551
Product Brand : MIONE
Product Name : sp7731g_1h10_hd_oversea
Product Device : sp7731g_1h10
Product Board : sp7731gea_hdr
Product Manfct : MIONE
Board Platform : sc8830
Product Info : sp7731g_1h10
Product Model : Mione V3

SECSolution : LEGACY [SS]


Operation : Flash Firmware [ v2.07 ]

Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot ...
Boot sent!
Kick FDL ...
Kick FDL again ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x20
PMTMng : Update failed!
ERROR : 00000084:84000000FF7B7E00
SYS : OPERATION FAILED!


Error : Flashing failed!
Make sure device HW is ok, check battery and cable! Try hold BootKey at whole Flash Process

Reconnect Power/Cable!

Operation : Identify [ v2.07 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...


Device not found!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Identify [ v2.07 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731G_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
Kick FDL again ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Device info :


Platform Version: MOCORTM_14B_MP_7731G_W17.22.4_Debug
Project Version: sc7731g_CP0_modem
BASE Version: TM_BASE_W17.22.4
MMI Version: sc7731g_modem
HW Version: sc7731g_CP0_modem
CMP_Time : 05-31-2017 21:23:59

MODEM TAG : MOCORTM_14B_MP_7731G_W17.22.4_Debug_TM_BASE_W17.22 .4_sc7731g_CP0_modem_sc7731g_CP0_modem_sc7731g_mod em

UserData : STATE : PLAIN [EXTFS]

- > INFO : Remove cable from device to switch it off!

Done!
Elapsed: 00:00:56

Operation : Flash Firmware [ v2.07 ]

Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True

Setting : WholeFLASH FORMAT : True
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...


Device not found!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Flash Firmware [ v2.07 ]

Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True

Setting : WholeFLASH FORMAT : True
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731G_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
Kick FDL again ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

ERASE : FORMAT WHOLE FLASH ...
ERASE : FORMAT FLASH Completed!

PMTMng : Load PMT
PMTMng : 0x20
PMTMng : Update failed!
ERROR : 00000084:84000000FF7B7E00
SYS : OPERATION FAILED!


Error : Flashing failed!
Make sure device HW is ok, check battery and cable! Try hold BootKey at whole Flash Process

Reconnect Power/Cable!

CHAUDHRAY ARSHAD 09-07-2020 14:10

flashing now fast good mobicel v4
https://i.imgur.com/XGztEib.png

Emsel 09-07-2020 14:26

Good update, great work team!


All times are GMT +1. The time now is 02:29.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -

Page generated in 0.13106 seconds with 6 queries

SEO by vBSEO