GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 09-04-2020, 09:25   #1 (permalink)
Product Supporter
 
Join Date: Jun 2009
Location: private
Posts: 36,417
Member: 1043909
Status: Offline
Thanks Meter: 60,861
Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.07 - UltraReading & New Features


Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.07 - UltraReading & New Features activated

As ordinary, unique functions and methods released

Core
Changed : FlashCore Protocol updated
BugFix : SC9832E line support updated
BugFix : SC9820E line support updated
BugFix : SC9863x line support updated
NewFeature : eMMC ReadOnly check for DLv4 and later ( automatic during boot )
Changed : All service features speed under FlashMode increased

Flasher
Changed : Flash Engine updated
Changed : FastFlash protocol updated

Service
BugFix [Identify] : FS state detection may fail for legacy SPD line, fixed
Changed [Identify] : SelfLearn / Automatic DB update during "Identify" rebuild
Changed [Identify] : Support detection of AES and RSA-enabled auth in devices/loaders
Changed [Identify] : Support correct BASE <-> DEVICE verification for optimal loader selection
BugFix [Read Privacy] : Privacy Lock reading on some devices may fail , fixed
NewFeature [Read Privacy] : Mobile AntiTheft password reading ( another version of "privacy lock" )
BugFix [Format FS] : Fixed Format FS in DiagMode for Android 10 and modern Android 9 devices

Firmware Reader
Changed : Complete FWReader rebuild to cover most count of different devices, existing on market *
!* Almost all Flashing issues has been fixed, FWRead repeat required for problematic cases/models!
Changed : UltraReading option activated ! *
!* Now reading of UniSoc devices 3-5 times faster, than before
- approx 20 mins instead of 70 for SC9853i (2.2 GiB) comparing to older releases
- approx 12 mins instead of 40 for SC9832E (2.5 GiB) comparing to older releases
- approx 20 mins instead of 60 for SC9863 (4.4 GiB) comparing to older releases
- approx 15 mins instead of 50 for SC7731 (1.5 GiB) comparing to older releases
!* Most generic loaders now support FastReading ( RS,SS,0S,1S,2S )
- Use USB-2 port !
- DO NOT use USB-3 port !
- DO NOT use USB-HUB !
Changed : Improved structure identification
Changed : Support more different types
Changed : Android 10 devices support improved

Model DB
Changed : New Generic loaders included and updated existing ones
Changed : SC9820E(eMMC), SC9832E, SC9863x loaders updated

Other
BugFix : Minor changes and fixes
Changed : Power Reset/Switch off scenario operation-depend now
Option : GUI ( File -> GUI ) : Allow select other interface mode*
!* Default interface - standard V2 line GUI
!* Wide interface - best for big screen / big distance to monitor
!* Wide log - extend log window to screen size - optimal for most cases


Download link #1

Download link #2

Download link #3


How to upload files to support

Infinity-Box 15 years updates and support as nobody else since year 2005




  Reply With Quote
The Following 69 Users Say Thank You to YellowBoss For This Useful Post:
Show/Hide list of the thanked
Old 09-04-2020, 11:06   #2 (permalink)
No Life Poster
 
Join Date: Feb 2018
Location: Nigeria
Posts: 1,459
Member: 2812901
Status: Offline
Thanks Meter: 492
Booooooooooooooooooooom update
Thank *** for successful update.
  Reply With Quote
Old 09-04-2020, 11:49   #3 (permalink)
Insane Poster
 
Join Date: Aug 2014
Posts: 77
Member: 2234872
Status: Offline
Thanks Meter: 4
Always good updates many box i have I'm no more using


But this is awesome

I like you team keep it up
  Reply With Quote
Old 09-04-2020, 13:15   #4 (permalink)
Crazy Poster
 
Join Date: Apr 2017
Posts: 50
Member: 2708690
Status: Offline
Thanks Meter: 7
Thanks team fò the update. We wait for Qualcomm module update.
  Reply With Quote
The Following User Says Thank You to nasch For This Useful Post:
Old 09-04-2020, 14:02   #5 (permalink)
No Life Poster
 
reedson's Avatar
 
Join Date: Mar 2016
Location: MWA
Posts: 1,073
Member: 2541648
Status: Offline
Thanks Meter: 166
Thanks for New Features
SP Line long awaited
  Reply With Quote
Old 09-04-2020, 14:24   #6 (permalink)
No Life Poster
 
sneha's Avatar
 
Join Date: Aug 2006
Location: BHARAT
Posts: 3,076
Member: 327043
Status: Offline
Sonork: 100.1587811
Thanks Meter: 1,514
Quote:
Originally Posted by YellowBoss View Post
- Use USB-2 port !
- DO NOT use USB-3 port !
- DO NOT use USB-HUB !

mean USB 2.0 port good for SPD and 3.0 not good ?
  Reply With Quote
The Following 2 Users Say Thank You to sneha For This Useful Post:
Old 09-04-2020, 15:09   #7 (permalink)
Insane Poster
 
Join Date: Feb 2020
Location: South Africa
Posts: 75
Member: 2948174
Status: Offline
Sonork: 100.1602299
Thanks Meter: 40
Palace add option rebuild firmware SC to PCK file
  Reply With Quote
The Following User Says Thank You to Noorgsmserver For This Useful Post:
Old 09-04-2020, 20:07   #8 (permalink)
Freak Poster
 
Join Date: Nov 2013
Location: zimbabwe
Posts: 241
Member: 2075865
Status: Offline
Thanks Meter: 99
Service
BugFix [Identify] : FS state detection may fail for legacy SPD line, fixed
Changed [Identify] : SelfLearn / Automatic DB update during "Identify" rebuild
Changed [Identify] : Support detection of AES and RSA-enabled auth in devices/loaders
Changed [Identify] : Support correct BASE <-> DEVICE verification for optimal loader selection
BugFix [Read Privacy] : Privacy Lock reading on some devices may fail , fixed
NewFeature [Read Privacy] : Mobile AntiTheft password reading ( another version of "privacy lock" )
BugFix [Format FS] : Fixed Format FS in DiagMode for Android 10 and modern Android 9 devices

Thanks for fixing privacy lock, now awaits SP Lock for mordern phones.
  Reply With Quote
Old 09-04-2020, 20:38   #9 (permalink)
Junior Member
 
Join Date: Aug 2020
Location: Mwanza Tanzania
Posts: 5
Member: 2964921
Status: Offline
Thanks Meter: 0
Thank for Good apdate, but still waiting for sp unlock
please activate it if possible
  Reply With Quote
Old 09-05-2020, 06:59   #10 (permalink)
No Life Poster
 
Join Date: Mar 2011
Location: Faisalabad
Posts: 1,482
Member: 1527968
Status: Offline
Sonork: 100.1651182
Thanks Meter: 483
NewFeature : eMMC ReadOnly check for DLv4 and later ( automatic during boot )
tnax save time feature
  Reply With Quote
The Following User Says Thank You to alimobile279 For This Useful Post:
Old 09-05-2020, 07:32   #11 (permalink)
No Life Poster
 
Join Date: Apr 2017
Location: pakistan
Posts: 595
Member: 2711874
Status: Offline
Sonork: 100.650600
Thanks Meter: 462
Always good update and best work... Thanks
  Reply With Quote
The Following User Says Thank You to zeeshan ali 786 For This Useful Post:
Old 09-05-2020, 07:39   #12 (permalink)
No Life Poster
 
JayDi's Avatar
 
Join Date: Mar 2007
Location: Where you live
Posts: 18,542
Member: 462970
Status: Offline
Thanks Meter: 20,352
10 minutes or so, now it comfort to use
Code:
Operation : Identify [ v2.07 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_512MB_SS
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : 0x0002
FDL : Control transfered!

Boot Done!

Device info : 
Patch Level    : OPM2.171019.012
Display ID     : PSP3406DUO.20180830.1.0.00
Ver. Incmt     : 35414
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-08-05
Build Time     : 30.08.2018
Product Model  : PSP3406DUO
Product Brand  : Prestigio
Product Name   : PSP3406DUO
Product Device : IN39B3G
Product Manfct : Prestigio
Product Info   : PSP3406DUO
Product Board  : SC7731E
Board Platform : sp7731e


NVMng  : SecurityInfo 
IMEI[1] : 35xxxxxxxxxxxxx
IMEI[2] : 35xxxxxxxxxxxxx
IMEI[3] : 86xxxxxxxxxxxxx
WIFIMAC : FFFFFFFFFFFF
BT_MAC  : FFFFFFFFFFFF
SEC : SLS:0, SKS:0, SKV:4

Platform Version: MOCORTM_17C_W18.23.4_P2_Debug
Project Version:   pike2_pub
BASE  Version:    FM_BASE_17C_W18.23.4_P2
HW Version:        sc7731e_modem

MODEM TAG : MOCORTM_17C_W18.23.4_P2_Debug_FM_BASE_17C_W18.23.4_P2_sc7731e_modem_pike2_pub

USERDATA : FILESYSTEM : F2FS  with FDE ( Full Disk Encryption ***)

 - > INFO : Remove cable from device to switch it off!

Done!
Elapsed: 00:00:56
Code:
Operation : Read FW [ v2.07 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_512MB_SS
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : 0x0002
FDL : Control transfered!

Boot Done!

Device info : 
Patch Level    : OPM2.171019.012
Display ID     : PSP3406DUO.20180830.1.0.00
Ver. Incmt     : 35414
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-08-05
Build Time     : 30.08.2018
Product Model  : PSP3406DUO
Product Brand  : Prestigio
Product Name   : PSP3406DUO
Product Device : IN39B3G
Product Manfct : Prestigio
Product Info   : PSP3406DUO
Product Board  : SC7731E
Board Platform : sp7731e

AndroidVer : 8
VlnrLevel : 0x00

SP7731E__Prestigio__PSP3406DUO__8.1.0__PSP3406DUO.20180830.1.0.00__OPM2.171019.012__PSP3406DUO

Read : prodnv.img
ExtSparse : Compression ratio : 13%
Read : phase.cfg
Read : recovery.img
Read : tos.bin
Read : sml.bin
Read : u-boot.bin
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Read : nvitem_w.bin
Make : persist.img
Read : gnssmodem.bin
Read : gnssbdmodem.bin
Read : modem_wcn.img
Read : modem_w.bin
Read : gdsp_w.bin
Read : pm_sys.bin
Read : boot.img
Read : system.img
ExtSparse : Compression ratio : 91%
Make : cache.img
Read : vendor.img
ExtSparse : Compression ratio : 47%
Read : vbmeta.img
Make : userdata.img
Read : u-boot-spl.bin

Firmware size : 0x60049168 ( 1,50 GiB )
Android Info saved : _Android_info.txt
Reconnect Power/Cable!

Done!
Elapsed: 00:10:34
Code:
Open : SPD_PROG.xml
Reading package ... 
Read package finished!

Created by Infinity-Box (c) 2020
Chinese Miracle II : Spreadtrum / UniSoc Service Module
Device Info file   : _Android_info.txt

Patch Level    : OPM2.171019.012
Display ID     : PSP3406DUO.20180830.1.0.00
Ver. Incmt     : 35414
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-08-05
Build Time     : 30.08.2018
Product Model  : PSP3406DUO
Product Brand  : Prestigio
Product Name   : PSP3406DUO
Product Device : IN39B3G
Product Manfct : Prestigio
Product Info   : PSP3406DUO
Product Board  : SC7731E
Board Platform : sp7731e

SECSolution : MODERN [RS/0S/1S/2S]
 
Operation : Flash Firmware [ v2.07 ]

Setting   : Update NVRAM : True
Setting   : Force NVRAM : False
Setting   : Update PMT   : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : 0x0002
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x20
PMTMng : Update PMT Ok!

NVRM  : nvitem_w.bin
NVMng  : Load 0x30
NVMng  : Init SRC
NVMng  : SecurityInfo 
IMEI[1] : 35xxxxxxxxxxxxxx
IMEI[2] : 35xxxxxxxxxxxxxx
IMEI[3] : 86xxxxxxxxxxxxxx
WIFIMAC : FFFFFFFFFFFF
BT_MAC  : FFFFFFFFFFFF
SEC : SLS:0, SKS:0, SKV:4

NVMng  : Backup Ok , 0x00066B20
NVMng  : Init DST
NVMng  : Rx10 : Wx0F
NVMng  : NVM block updated!

FSIMG  : prodnv.img
CODE  : recovery.img
CODE  : tos.bin
CODE  : tos.bin
CODE  : sml.bin
CODE  : sml.bin
UBOOT  : u-boot.bin
UBOOT  : u-boot.bin
CODE  : boot_logo.bmp
CODE  : fastboot_logo.bmp
FSIMG  : persist.img
CODE  : gnssmodem.bin
CODE  : gnssbdmodem.bin
CODE  : modem_wcn.img
CODE  : modem_w.bin
CODE  : gdsp_w.bin
CODE  : pm_sys.bin
CODE  : boot.img
FSIMG  : system.img
FSIMG  : cache.img
FSIMG  : vendor.img
CODE  : vbmeta.img
CODE  : vbmeta.img
FSIMG  : userdata.img
UBOOT  : u-boot-spl.bin
ERASE : MISC
ERASE : UBOOT_LOG
ERASE : FLASH_W
Flashing finished!
Reconnect Power/Cable!

Done!
Elapsed: 00:04:32
  Reply With Quote
The Following 12 Users Say Thank You to JayDi For This Useful Post:
Show/Hide list of the thanked
Old 09-05-2020, 07:42   #13 (permalink)
No Life Poster
 
JayDi's Avatar
 
Join Date: Mar 2007
Location: Where you live
Posts: 18,542
Member: 462970
Status: Offline
Thanks Meter: 20,352
QIN lines and others rare things, and most common now work without problems
Code:
Operation : Identify [ v2.07 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9820E_BASE : SC9820e_eMMC_512MB_SS
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : 0x0002
FDL : Control transfered!

Boot Done!

Device info : 
Patch Level    : KTU84P
Display ID     : A350_10B_DUOQIN_CUST_V02_20180726_1520
Ver. Incmt     : 88
Ver. CodeName  : REL
Ver. Release   : 4.4.4
Build Time     : 26.09.2019
Product Model  : Qin 1s+
Product Brand  : QIN
Product Name   : sp9820e_1h10_native
Product Device : sp9820e_1h10
Product Board  : sp9820e_1h10
Product Manfct : duoqin
Board Platform : sp9820e
Product Info   : sp9820e_1h10


NVMng  : SecurityInfo 
IMEI[1] : 86xxxxxxxxxxxx
IMEI[2] : 86xxxxxxxxxxxx
IMEI[3] : 86xxxxxxxxxxxx
WIFIMAC : FFFFFFFFFFFF
BT_MAC  : FFFFFFFFFFFF
SEC : SLS:0, SKS:0, SKV:4

Platform Version: MOCORTM_17B_Release_W19.14.2_Debug
Project Version:   sharkle_Feature_Phone
BASE  Version:    FM_BASE_17B_Release_W19.14.2
HW Version:        sc9820e_modem

MODEM TAG : MOCORTM_17B_Release_W19.14.2_Debug_FM_BASE_17B_Release_W19.14.2_sc9820e_modem_sharkle_Feature_Phone

UserData : STATE : PLAIN [EXTFS]

 - > INFO : Remove cable from device to switch it off!

Done!
Elapsed: 00:00:48
Code:
Operation : Read FW [ v2.07 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9820E_BASE : SC9820e_eMMC_512MB_SS
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : 0x0002
FDL : Control transfered!

Boot Done!

Device info : 
Patch Level    : KTU84P
Display ID     : A350_10B_DUOQIN_CUST_V02_20180726_1520
Ver. Incmt     : 88
Ver. CodeName  : REL
Ver. Release   : 4.4.4
Build Time     : 26.09.2019
Product Model  : Qin 1s+
Product Brand  : QIN
Product Name   : sp9820e_1h10_native
Product Device : sp9820e_1h10
Product Board  : sp9820e_1h10
Product Manfct : duoqin
Board Platform : sp9820e
Product Info   : sp9820e_1h10

AndroidVer : 4
VlnrLevel : 0x00

SP9820E__duoqin__Qin_1s+__4.4.4__A350_10B_DUOQIN_CUST_V02_20180726_1520__KTU84P__sp9820e_1h10

Read : prodnv.img
Read : phase.cfg
Read : recovery.img
Read : tos.bin
Read : sml.bin
Read : u-boot.bin
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Read : nvitem_l.bin
Read : gnssmodem.bin
Read : gnssbdmodem.bin
Read : modem_wcn.img
Make : persist.img
Read : modem_l.bin
Read : deltanv_l.bin
Read : gdsp_l.bin
Read : ldsp_l.bin
Read : pm_sys.bin
Read : boot.img
Read : system.img
Make : cache.img
Make : userdata.img
Read : u-boot-spl.bin

Firmware size : 0x1CE450D8 ( 462,27 MiB )
Android Info saved : _Android_info.txt
Reconnect Power/Cable!

Done!
Elapsed: 00:03:27
Code:
Open : SPD_PROG.xml
Reading package ... 
Read package finished!

Created by Infinity-Box (c) 2020
Chinese Miracle II : Spreadtrum / UniSoc Service Module
Device Info file   : _Android_info.txt

Patch Level    : KTU84P
Display ID     : A350_10B_DUOQIN_CUST_V02_20180726_1520
Ver. Incmt     : 88
Ver. CodeName  : REL
Ver. Release   : 4.4.4
Build Time     : 26.09.2019
Product Model  : Qin 1s+
Product Brand  : QIN
Product Name   : sp9820e_1h10_native
Product Device : sp9820e_1h10
Product Board  : sp9820e_1h10
Product Manfct : duoqin
Board Platform : sp9820e
Product Info   : sp9820e_1h10

SECSolution : LEGACY [SS]


Operation : Flash Firmware [ v2.07 ]

Setting   : Update NVRAM : True
Setting   : Force NVRAM : False
Setting   : Update PMT   : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : 0x0002
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x1F
PMTMng : Update PMT Ok!

NVRM  : nvitem_l.bin
NVMng  : Load 0x30
NVMng  : Init SRC
NVMng  : SecurityInfo 
IMEI[1] : 86xxxxxxxxxxxx
IMEI[2] : 86xxxxxxxxxxxx
IMEI[3] : 86xxxxxxxxxxxx
WIFIMAC : FFFFFFFFFFFF
BT_MAC  : FFFFFFFFFFFF
SEC : SLS:0, SKS:0, SKV:4

NVMng  : Backup Ok , 0x000C61D8
NVMng  : Init DST
NVMng  : Rx28 : Wx27
NVMng  : NVM block updated!

FSIMG  : prodnv.img
CODE  : recovery.img
CODE  : tos.bin
CODE  : tos.bin
CODE  : sml.bin
CODE  : sml.bin
UBOOT  : u-boot.bin
UBOOT  : u-boot.bin
CODE  : boot_logo.bmp
CODE  : fastboot_logo.bmp
CODE  : gnssmodem.bin
CODE  : gnssbdmodem.bin
CODE  : modem_wcn.img
FSIMG  : persist.img
CODE  : modem_l.bin
CODE  : deltanv_l.bin
CODE  : gdsp_l.bin
CODE  : ldsp_l.bin
CODE  : pm_sys.bin
CODE  : boot.img
FSIMG  : system.img
FSIMG  : cache.img
FSIMG  : userdata.img
UBOOT  : u-boot-spl.bin
ERASE : MISC
ERASE : FLASH_L
ERASE : UBOOT_LOG
Flashing finished!
Reconnect Power/Cable!

Done!
Elapsed: 00:01:19
  Reply With Quote
The Following 8 Users Say Thank You to JayDi For This Useful Post:
Show/Hide list of the thanked
Old 09-05-2020, 07:44   #14 (permalink)
No Life Poster
 
JayDi's Avatar
 
Join Date: Mar 2007
Location: Where you live
Posts: 18,542
Member: 462970
Status: Offline
Thanks Meter: 20,352
AntiTheft lock reading activated for more Trannsion devices ( itel/infinix/and etc )
Code:
Operation : Read PrivacyLock [ v2.07 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_512MB_RS_LOW
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : 0x0002
FDL : Control transfered!

Boot Done!

PASSWORD : 123456789012

Reconnect Power/Cable!

Done!
Elapsed: 00:00:30
  Reply With Quote
The Following 8 Users Say Thank You to JayDi For This Useful Post:
Show/Hide list of the thanked
Old 09-05-2020, 07:46   #15 (permalink)
No Life Poster
 
JayDi's Avatar
 
Join Date: Mar 2007
Location: Where you live
Posts: 18,542
Member: 462970
Status: Offline
Thanks Meter: 20,352
More Android 10 devices ( seems as almost all exisiting ) are covered
Code:
Operation : Identify [ v2.07 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9863x_BASE : SC9863A_eMMC_3GB_0S
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : 0x0008
FDL :  EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

Device info : 
Product Brand  : Philips
Product Device : S266
Product Model  : Xenium S266
Product Name   : S266_RU
Patch Level    : QP1A.190711.020
Display ID     : Philips_S266_2024_V03_RU
Ver. Incmt     : 23310
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2020-06-05
Build Time     : 10.06.2020
Product Info   : S266_RU
Product Board  : sp9863a_1h10
Board Platform : sp9863a
Product Manfct : Philips


NVMng  : SecurityInfo 
IMEI[1] : 86xxxxxxxxxxxxxxx
IMEI[2] : 86xxxxxxxxxxxxxxx
IMEI[3] : 86xxxxxxxxxxxxxxx

SEC : SLS:0, SKS:0, SKV:4

Platform Version: MOCORTM_18B_W20.21.5_Debug
Project Version:   sharkl3_pub
BASE  Version:    FM_BASE_18B_W20.21.5
HW Version:        sc9863A_modem
CMP_Time : 05-22-2020 09:14:00

MODEM TAG : MOCORTM_18B_W20.21.5_Debug_FM_BASE_18B_W20.21.5_sc9863A_modem_sharkl3_pub

USERDATA : FILESYSTEM : F2FS  with FDE ( Full Disk Encryption ***)

 - > INFO : Remove cable from device to switch it off!

Done!
Elapsed: 00:02:00
Code:
Operation : Read FW [ v2.07 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9863x_BASE : SC9863A_eMMC_3GB_0S
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : 0x0008
FDL :  EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

Device info : 
Product Brand  : Philips
Product Device : S266
Product Model  : Xenium S266
Product Name   : S266_RU
Patch Level    : QP1A.190711.020
Display ID     : Philips_S266_2024_V03_RU
Ver. Incmt     : 23310
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2020-06-05
Build Time     : 10.06.2020
Product Info   : S266_RU
Product Board  : sp9863a_1h10
Board Platform : sp9863a
Product Manfct : Philips

AndroidVer : 10
VlnrLevel : 0x02

SP9863A__10__Philips_S266_2024_V03_RU__QP1A.190711.020__S266_RU

Read : u-boot.bin
Read : sml.bin
Read : tos.bin
Read : teecfg.bin
Read : vbmeta.img
Read : vbmeta_system.img
Read : vbmeta_vendor.img
Read : dtbo.img
Read : ldsp_l.bin
Read : gdsp_l.bin
Read : modem_l.bin
Read : nvitem_l.bin
Read : deltanv_l.bin
Read : modem_wcn.img
Read : gnssmodem.bin
Read : gnssbdmodem.bin
Read : pm_sys.bin
Read : boot.img
Read : recovery.img
Make : persist.img
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Read : socko.img
ExtSparse : Compression ratio : 55%
Read : odmko.img
ExtSparse : Compression ratio : 14%
Make : userdata.img
Make : cache.img
Read : prodnv.img
ExtSparse : Compression ratio : 21%
Read : udc_config.bin
Read : phase.cfg
Read : super.img
Read : u-boot-spl.bin

Waiting for device ... 
ADB : Device found!
ADB : Connected!
ADB : Prepare Ok!
Looking for a troubles ...
Waiting for a miracle ...
Found bear!

Firmware size : 0xD63A0764 ( 3,35 GiB )
Android Info saved : _Android_info.txt
Reconnect Power/Cable!

Done!
Elapsed: 00:20:52
Code:
Open : SPD_PROG.xml
Reading package ... 
Read package finished!

Created by Infinity-Box (c) 2020
Chinese Miracle II : Spreadtrum / UniSoc Service Module
Device Info file   : _Android_info.txt

Product Brand  : Philips
Product Device : S266
Product Model  : Xenium S266
Product Name   : S266_RU
Patch Level    : QP1A.190711.020
Display ID     : Philips_S266_2024_V03_RU
Ver. Incmt     : 23310
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2020-06-05
Build Time     : 10.06.2020
Product Info   : S266_RU
Product Board  : sp9863a_1h10
Board Platform : sp9863a
Product Manfct : Philips

SECSolution : MODERN [RS/0S/1S/2S]


Operation : Flash Firmware [ v2.07 ]

Setting   : Update NVRAM : True
Setting   : Force NVRAM : False
Setting   : Update PMT   : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : 0x0008
FDL :  EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x2A
PMTMng : Update PMT Ok!

NVRM  : nvitem_l.bin
NVMng  : Load 0x30
NVMng  : Init SRC
NVMng  : SecurityInfo 
IMEI[1] : 86xxxxxxxxxxx
IMEI[2] : 86xxxxxxxxxxx
IMEI[3] : 86xxxxxxxxxxx

SEC : SLS:0, SKS:0, SKV:4

NVMng  : Backup Ok , 0x000C6348
NVMng  : Init DST
NVMng  : Rx2A : Wx29
NVMng  : NVM block updated!

UBOOT  : u-boot.bin
UBOOT  : u-boot.bin
CODE  : sml.bin
CODE  : sml.bin
CODE  : tos.bin
CODE  : tos.bin
CODE  : teecfg.bin
CODE  : teecfg.bin
CODE  : vbmeta.img
CODE  : vbmeta.img
CODE  : vbmeta_system.img
CODE  : vbmeta_vendor.img
CODE  : dtbo.img
CODE  : ldsp_l.bin
CODE  : gdsp_l.bin
CODE  : modem_l.bin
CODE  : deltanv_l.bin
CODE  : modem_wcn.img
CODE  : gnssmodem.bin
CODE  : gnssbdmodem.bin
CODE  : pm_sys.bin
CODE  : boot.img
CODE  : recovery.img
FSIMG  : persist.img
CODE  : boot_logo.bmp
CODE  : fastboot_logo.bmp
FSIMG  : socko.img
FSIMG  : odmko.img
FSIMG  : userdata.img
FSIMG  : cache.img
FSIMG  : prodnv.img
CODE  : udc_config.bin
CODE  : super.img
UBOOT  : u-boot-spl.bin
ERASE : FLASH_L
ERASE : MISC
ERASE : UBOOT_LOG
ERASE : SYSDUMPDB
ERASE : METADATA
Flashing finished!
Reconnect Power/Cable!

Done!
Elapsed: 00:03:11
  Reply With Quote
The Following 13 Users Say Thank You to JayDi For This Useful Post:
Show/Hide list of the thanked
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 09:09.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.27357 seconds with 8 queries

SEO by vBSEO