Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.11 - Unlock, Repair, New CPU - Page 3 - GSM-Forum

candelwizzy · 02-11-2021, 15:25

Nice update Infinity Box Team.

reydelinframund · 02-11-2021, 18:28

I have a zte v10 vita with permanent lock could you help me

h3yazlan · 02-11-2021, 18:55

good work best of luck

blushis · 02-11-2021, 20:02

Super update thnx team keep it up....

YellowBoss · 02-11-2021, 20:03

Quote:

Originally Posted by fahadboss

New setup exe is being detected as trojan?
Before this version was ok.

Ask your antivirus vendor about the problem, let he tell you what is the problem with this application.
If they can not tell you what is the problem - return your antivirus software and get from them 100% money refund because their software block completely safe Infinity CM2SP2 application.

YellowBoss · 02-11-2021, 20:08

@nestor françois
windows coders do not know what is the the difference in "protected" and "infected" application.

usman0000 · 02-11-2021, 20:10

Quote:

Originally Posted by JayDi

Check device, is it still asking for code?

Use nokia best 100% works

Kennedykpoma · 02-11-2021, 20:21

Great work. Great work.

azaanali · 02-12-2021, 08:06

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9832E_BASE : SC9832E_eMMC_1GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : PPR1.180610.011
Display ID : QSmartRocketPro_MP_02_06
Ver. Incmt : 20200602
Ver. CodeName : REL
Ver. Release : 9
Sec. Patch : 2020-06-05
Build Time : 01.06.2020
Product Model : Rocket Pro
Product Brand : QSmart
Product Name : Rocket_Pro
Product Device : Rocket_Pro
Product Manfct : QMobile
Product Info : Rocket_Pro
Product Board : Rocket_Pro
Board Platform : sp9832e

AndroidVer : 9
VlnrLevel : 0x02

SP9832E__QMobile__Rocket_Pro__9__QSmartRocketPro_M P_02_06__PPR1.180610.011__Rocket_Pro

Read : u-boot.bin
Read : sml.bin
Read : tos.bin
Read : vbmeta.img
Read : dtb.img
Read : dtbo.img
Read : ldsp_l.bin
Read : gdsp_l.bin
Read : modem_l.bin
Read : deltanv_l.bin
Read : nvitem_l.bin
Read : modem_wcn.img
Read : gnssmodem.bin
Read : gnssbdmodem.bin
Read : pm_sys.bin
Read : boot.img
Read : recovery.img
Make : persist.img
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Read : system.img
Read : vendor.img
Read : otp_product.img
ExtSparse : Compression ratio : 1%
Make : userdata.img
Make : cache.img
Read : prodnv.img
ExtSparse : Compression ratio : 14%
Read : phase.cfg
Read : u-boot-spl.bin

Waiting for device ...
ADB : Device found!

Firmware size : 0xEE25AD6C ( 3.72 GiB )
Android Info saved : _Android_info.txt
Reconnect Power/Cable!

Done!
Elapsed: 00:24:07

butt.cell · 02-12-2021, 09:04

i did make nvm backup butt how can i send u

anesyasser · 02-12-2021, 10:11

Very Good Work Infinity Team

gabbar7040 · 02-12-2021, 10:50

Operation : Repair Security [ v2.11 ]

BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : VDC_ZA_P731K30V1.0.0B10

NVMng : SecurityInfo
IMEI[1] : 8614860414xxxxx
IMEI[2] : 867400xxxxxxxxx
WIFIMAC : 000000000000
BT_MAC : 000000000000
SEC : SLS:2, SKS:0, SKV:4

New SecInfo :
IMEI[1] : 8614860616xxxxx

>>> Info : Signed device, security repair may lead to break device!

NVMng : Security data updated!

Done!
Elapsed: 00:00:39
while flash mode imei repair not done with this error

Operation : Repair Security [ v2.11 ]

BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : VDC_ZA_P731K30V1.0.0B10

NVMng : SecurityInfo
IMEI[1] : 861486041480905
IMEI[2] : 867400020316620
WIFIMAC : 000000000000
BT_MAC : 000000000000
SEC : SLS:2, SKS:0, SKV:4

New SecInfo :
IMEI[1] : 861486061680905

>>> Info : Signed device, security repair may lead to break device!

NVMng : Security data updated!

Done!
Elapsed: 00:00:39

Yusuf Lawal · 02-12-2021, 22:14

Quote:

Originally Posted by gabbar7040

Operation : Repair Security [ v2.11 ]

BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : VDC_ZA_P731K30V1.0.0B10

NVMng : SecurityInfo
IMEI[1] : 8614860414xxxxx
IMEI[2] : 867400xxxxxxxxx
WIFIMAC : 000000000000
BT_MAC : 000000000000
SEC : SLS:2, SKS:0, SKV:4

New SecInfo :
IMEI[1] : 8614860616xxxxx

>>> Info : Signed device, security repair may lead to break device!

NVMng : Security data updated!

Done!
Elapsed: 00:00:39
while flash mode imei repair not done with this error

Operation : Repair Security [ v2.11 ]

BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : VDC_ZA_P731K30V1.0.0B10

NVMng : SecurityInfo
IMEI[1] : 861486041480905
IMEI[2] : 867400020316620
WIFIMAC : 000000000000
BT_MAC : 000000000000
SEC : SLS:2, SKS:0, SKV:4

New SecInfo :
IMEI[1] : 861486061680905

>>> Info : Signed device, security repair may lead to break device!

NVMng : Security data updated!

Done!
Elapsed: 00:00:39

Why do u want to change the IMEI?
Btw, as a professional software engineer the word "editing" even more preferably than change, should be incase of next time.....

decodari · 02-12-2021, 23:14

after this update software does not open without any error. any idea?

thanks!

reydelinframund · 02-13-2021, 00:20

I have a zte v10 vita with a permanent blocking problem, they modified the imei with another tool, could you help me?

02-12-2021, 08:06	#39 (permalink)
azaanali Freak Poster Join Date: Mar 2014 Location: PAKISTAN Posts: 240 Member: 2145475 Status: Offline Thanks Meter: 100	QSmart Rocket_Pro sp9832e Firmware Read Successful .SPD-UniSoc v2.11 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! BootVersion : SPRD3 Boot : INF : 0_SC9832E_BASE : SC9832E_eMMC_1GB_0S Sending Init Boot ... Boot sent! Kick FDL ... BootVersion : Spreadtrum Boot Block version 1.1 Protocol setup ... Port speed : 921600 Sending Flash Boot ... Boot sent! Kick FLASH FDL ... FDL : 0x0008 FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True FDL : RAW : 0x0002 FDL : FLH : 0x400000 FDL : Control transfered! Boot Done! Device info : Patch Level : PPR1.180610.011 Display ID : QSmartRocketPro_MP_02_06 Ver. Incmt : 20200602 Ver. CodeName : REL Ver. Release : 9 Sec. Patch : 2020-06-05 Build Time : 01.06.2020 Product Model : Rocket Pro Product Brand : QSmart Product Name : Rocket_Pro Product Device : Rocket_Pro Product Manfct : QMobile Product Info : Rocket_Pro Product Board : Rocket_Pro Board Platform : sp9832e AndroidVer : 9 VlnrLevel : 0x02 SP9832E__QMobile__Rocket_Pro__9__QSmartRocketPro_M P_02_06__PPR1.180610.011__Rocket_Pro Read : u-boot.bin Read : sml.bin Read : tos.bin Read : vbmeta.img Read : dtb.img Read : dtbo.img Read : ldsp_l.bin Read : gdsp_l.bin Read : modem_l.bin Read : deltanv_l.bin Read : nvitem_l.bin Read : modem_wcn.img Read : gnssmodem.bin Read : gnssbdmodem.bin Read : pm_sys.bin Read : boot.img Read : recovery.img Make : persist.img Read : boot_logo.bmp Read : fastboot_logo.bmp Read : system.img Read : vendor.img Read : otp_product.img ExtSparse : Compression ratio : 1% Make : userdata.img Make : cache.img Read : prodnv.img ExtSparse : Compression ratio : 14% Read : phase.cfg Read : u-boot-spl.bin Waiting for device ... ADB : Device found! Firmware size : 0xEE25AD6C ( 3.72 GiB ) Android Info saved : _Android_info.txt Reconnect Power/Cable! Done! Elapsed: 00:24:07

02-12-2021, 09:04	#40 (permalink)
butt.cell Freak Poster Join Date: Mar 2015 Location: some way in da world Posts: 157 Member: 2360557 Status: Offline Thanks Meter: 29	hi i did make nvm backup butt how can i send u

02-12-2021, 10:50	#42 (permalink)
gabbar7040 Freak Poster Join Date: Jan 2016 Location: South Africa Posts: 142 Member: 2518179 Status: Offline Thanks Meter: 40	zte L130 imei repair dongle success but imei not changed in device Operation : Repair Security [ v2.11 ] BootMode : SVC 1. Power off device, wait 10-15 seconds 2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! Enter SVC ... Waiting Device ... Check SVC ... SVC : DiagChannel opened! Boot Done! SOC GEN : UniSoc ( E-family and Modern ) BuildInfo : VDC_ZA_P731K30V1.0.0B10 NVMng : SecurityInfo IMEI[1] : 8614860414xxxxx IMEI[2] : 867400xxxxxxxxx WIFIMAC : 000000000000 BT_MAC : 000000000000 SEC : SLS:2, SKS:0, SKV:4 New SecInfo : IMEI[1] : 8614860616xxxxx >>> Info : Signed device, security repair may lead to break device! NVMng : Security data updated! Done! Elapsed: 00:00:39 while flash mode imei repair not done with this error Operation : Repair Security [ v2.11 ] BootMode : SVC 1. Power off device, wait 10-15 seconds 2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! Enter SVC ... Waiting Device ... Check SVC ... SVC : DiagChannel opened! Boot Done! SOC GEN : UniSoc ( E-family and Modern ) BuildInfo : VDC_ZA_P731K30V1.0.0B10 NVMng : SecurityInfo IMEI[1] : 861486041480905 IMEI[2] : 867400020316620 WIFIMAC : 000000000000 BT_MAC : 000000000000 SEC : SLS:2, SKS:0, SKV:4 New SecInfo : IMEI[1] : 861486061680905 >>> Info : Signed device, security repair may lead to break device! NVMng : Security data updated! Done! Elapsed: 00:00:39

02-11-2021, 15:25	#31 (permalink)
candelwizzy Freak Poster Join Date: Sep 2008 Location: Ghana Akatsi Age: 40 Posts: 302 Member: 853308 Status: Offline Thanks Meter: 61	Nice update Infinity Box Team.

02-11-2021, 18:28	#32 (permalink)
reydelinframund Insane Poster Join Date: Jul 2012 Location: mexico Posts: 87 Member: 1786170 Status: Offline Thanks Meter: 30	I have a zte v10 vita with permanent lock could you help me

02-11-2021, 18:55	#33 (permalink)
h3yazlan Freak Poster Join Date: Nov 2019 Location: pakistan Age: 26 Posts: 282 Member: 2934984 Status: Offline Sonork: 69 Thanks Meter: 46	good work best of luck

02-11-2021, 20:02	#34 (permalink)
blushis No Life Poster Join Date: Nov 2020 Location: karachi Age: 29 Posts: 821 Member: 2973928 Status: Offline Thanks Meter: 260	Super update thnx team keep it up....

02-11-2021, 20:08	#36 (permalink)
YellowBoss Product Supporter Join Date: Jun 2009 Location: private Posts: 36,475 Member: 1043909 Status: Offline Thanks Meter: 60,926	@nestor françois windows coders do not know what is the the difference in "protected" and "infected" application.

02-11-2021, 20:21	#38 (permalink)
Kennedykpoma Junior Member Join Date: Jan 2020 Location: Nigeria Posts: 14 Member: 2943595 Status: Offline Thanks Meter: 1	Great work. Great work.

02-12-2021, 10:11	#41 (permalink)
anesyasser Junior Member Join Date: Feb 2021 Location: algeria Age: 23 Posts: 4 Member: 2980373 Status: Offline Thanks Meter: 0	Very Good Work Infinity Team

02-12-2021, 23:14	#44 (permalink)
decodari No Life Poster Join Date: Mar 2014 Location: Romania Posts: 1,067 Member: 2157664 Status: Offline Thanks Meter: 43	after this update software does not open without any error. any idea? thanks!

02-13-2021, 00:20	#45 (permalink)
reydelinframund Insane Poster Join Date: Jul 2012 Location: mexico Posts: 87 Member: 1786170 Status: Offline Thanks Meter: 30	I have a zte v10 vita with a permanent blocking problem, they modified the imei with another tool, could you help me?