Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.12 - New repair level activated - Page 6 - GSM-Forum

JayDi · 06-08-2021, 14:49

Quote:

Originally Posted by boidzero

T610 cannote support ex:honor changwan 20

Sure it will not, because Huawei are NOT generic phones.

KYEJUSA · 06-08-2021, 15:58

WHY NEW VERSION SHOW THIS;
1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : sp9832e_1h10_gofu-user 10 QP1A.190711.020 26221 release-keys
Platform Version: MOCORTM_18A_W20.04.1_Debug
Project Version: sharkle_Smart_Phone
BASE Version: FM_BASE_18A_W20.04.1
HW Version: sc9832e_modem

MODEM TAG : MOCORTM_18A_W20.04.1_Debug_FM_BASE_18A_W20.04.1_sc 9832e_modem_sharkle_Smart_Phone

NVMng : SecurityInfo
IMEI[1] : 352478113758587
IMEI[2] : 867400020316620
WIFIMAC : F86C03191B04
BT_MAC : F86C03911B04
SEC : SLS:2, SKS:0, SKV:4

SLStatus : 3C
Status : Locked! Server unlock required!

Connecting to server...
Connected
Init...
Init: Ok
Authenticating...
Authenticated
Checking Client version...
Client version Ok
Balance: 15, price:5
Process...
Process failed : Wrong SS - device security damaged

Reconnect Power/Cable!

Operation : SP Unlock [ v2.12 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : sp9832e_1h10_gofu-user 10 QP1A.190711.020 26221 release-keys
Platform Version: MOCORTM_18A_W20.04.1_Debug
Project Version: sharkle_Smart_Phone
BASE Version: FM_BASE_18A_W20.04.1
HW Version: sc9832e_modem

MODEM TAG : MOCORTM_18A_W20.04.1_Debug_FM_BASE_18A_W20.04.1_sc 9832e_modem_sharkle_Smart_Phone

NVMng : SecurityInfo
IMEI[1] : 352478113758587
IMEI[2] : 867400020316620
WIFIMAC : F86C03191B04
BT_MAC : F86C03911B04
SEC : SLS:2, SKS:0, SKV:4

SLStatus : 3C
Status : Locked! Server unlock required!

Connecting to server...
Connected
Init...
Init: Ok
Authenticating...
Authenticated
Checking Client version...
Client version Ok
Balance: 15, price:5
Process...
Process failed : Wrong SS - device security damaged

Reconnect Power/Cable!

JayDi · 06-08-2021, 16:00

Quote:

Originally Posted by KYEJUSA

WHY NEW VERSION SHOW THIS;
1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : sp9832e_1h10_gofu-user 10 QP1A.190711.020 26221 release-keys
Platform Version: MOCORTM_18A_W20.04.1_Debug
Project Version: sharkle_Smart_Phone
BASE Version: FM_BASE_18A_W20.04.1
HW Version: sc9832e_modem

MODEM TAG : MOCORTM_18A_W20.04.1_Debug_FM_BASE_18A_W20.04.1_sc 9832e_modem_sharkle_Smart_Phone

NVMng : SecurityInfo
IMEI[1] : 352478113758587
IMEI[2] : 867400020316620
WIFIMAC : F86C03191B04
BT_MAC : F86C03911B04
SEC : SLS:2, SKS:0, SKV:4

SLStatus : 3C
Status : Locked! Server unlock required!

Connecting to server...
Connected
Init...
Init: Ok
Authenticating...
Authenticated
Checking Client version...
Client version Ok
Balance: 15, price:5
Process...
Process failed : Wrong SS - device security damaged

Reconnect Power/Cable!

Operation : SP Unlock [ v2.12 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : sp9832e_1h10_gofu-user 10 QP1A.190711.020 26221 release-keys
Platform Version: MOCORTM_18A_W20.04.1_Debug
Project Version: sharkle_Smart_Phone
BASE Version: FM_BASE_18A_W20.04.1
HW Version: sc9832e_modem

MODEM TAG : MOCORTM_18A_W20.04.1_Debug_FM_BASE_18A_W20.04.1_sc 9832e_modem_sharkle_Smart_Phone

NVMng : SecurityInfo
IMEI[1] : 352478113758587
IMEI[2] : 867400020316620
WIFIMAC : F86C03191B04
BT_MAC : F86C03911B04
SEC : SLS:2, SKS:0, SKV:4

SLStatus : 3C
Status : Locked! Server unlock required!

Connecting to server...
Connected
Init...
Init: Ok
Authenticating...
Authenticated
Checking Client version...
Client version Ok
Balance: 15, price:5
Process...
Process failed : Wrong SS - device security damaged

Reconnect Power/Cable!

Most probably because device premanently locked, right?

YellowBoss · 06-08-2021, 19:05

Quote:

Originally Posted by Abussabah

automatic closes software

Hello,

Please follow the next steps - https://infinity-box.com/support/?r=100127

What is the result?

jason_ach · 06-08-2021, 20:31

Itel S15 Pro L6002P bootloop problem,after write firmware with CM2SP2 phone won't boot (dead).Write same firmware with UpgradeDownload_R23.19.4001 phone revive this is log:

Operation : Identify [ v2.12 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9863x_BASE : SC9863_eMMC_2GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0004
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : PPR1.180610.011
Display ID : L6002P-F6308-9.0-OP-V055-20200102
Ver. Incmt : OP-V055-20200102
Ver. CodeName : REL
Ver. Release : 9
Sec. Patch : 2019-12-05
Build Time : 02.01.2020
Product Model : itel L6002P
Product Brand : Itel
Product Name : F6308
Product Device : itel-L6002P
Product Manfct : itel
Product Info : L6002P
Product Board : L6002P
Board Platform : sp9863a
Product Name : L6002P
Product Device : L6002P

Platform Version: MOCORTM_18B_ITEL_W19.28.5_P5.02_Debug
Project Version: sharkl3_pub
BASE Version: FM_BASE_18B_ITEL_W19.28.5_P5.02
HW Version: sc9863A_modem
CMP_Time : 01-15-2020 21:25:46

MODEM TAG : MOCORTM_18B_ITEL_W19.28.5_P5.02_Debug_FM_BASE_18B_ ITEL_W19.28.5_P5.02_sc9863A_modem_sharkl3_pub

USERDATA : FILESYSTEM : F2FS with FDE ( Full Disk Encryption ***)

- > INFO : Remove cable from device to switch it off!

Done!
Elapsed: 00:01:18

Open : L6002P-F6308-9.0-OP-V077-20210406_1703_user.pac
VER : BP_R1.0.0
LEN : 3,99 GiB
CPU : s9863a1h10
VER : L6002P-F6308-9.0-OP-V077-20210406_1703-user

Reading package ...
Read package finished!

Patch Level : PPR1.180610.011
Display ID : L6002P-F6308-9.0-OP-V077-20210406
Ver. Incmt : OP-V077-20210406
Ver. CodeName : REL
Ver. Release : 9
Sec. Patch : 2021-04-05
Build Time : 06.04.2021
Product Model : itel L6002P
Product Brand : Itel
Product Name : F6308
Product Device : itel-L6002P
Product Manfct : itel
Product Info : L6002P
Product Board : L6002P
Board Platform : sp9863a
Product Name : L6002P
Product Device : L6002P

Operation : Flash Firmware [ v2.12 ]

Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : L6002P-F6308-9.0-OP-V077-20210406_1703_user.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0004
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x26
PMTMng : Update PMT Ok!

Prepare target ...
Prepare Ok!

CODE : gnssbdmodem.bin
CODE : PM_sharkl3_cm4.bin
UBOOT : u-boot-sign.bin
CODE : sharkl3_pubcp_DM_DSP.bin
CODE : recovery.img
CODE : SC9600_sharkl3_pubcp_modem.dat
CODE : sharkl3_cm4.bin
CODE : sharkl3_pubcp_LTEA_DSP.bin
FSIMG : userdata.img
CODE : logo.bmp(1)
FSIMG : vendor.img
ERASE : L_RUNTIMENV1
CODE : boot.img
UBOOT : u-boot-spl-16k-sign.bin
ERASE : UBOOT
CODE : dtb.img
CODE : tos-sign.bin
CODE : sml-sign.bin
CODE : prodnv.img
FSIMG : cache.img
ERASE : UBOOT_LOG
CODE : sharkl3_pubcp_deltanv.bin
CODE : cover.img
CODE : dtbo.img
FSIMG : product.img
ERASE : MISC
CODE : vbmeta-sign.img
CODE : gnssmodem.bin
FSIMG : persist.img
CODE : logo.bmp
FSIMG : system.img
Flashing finished!
Reconnect Power/Cable!

Done!
Elapsed: 00:04:16
Please tell me what is wrong?flashing with CM2SP2 phone won't boot.Flashing same firmware L6002P-F6308-9.0-OP-V077-20210406.zip with UpgradeDownload_R23.19.4001 phone work perfect

fallon100 · 06-08-2021, 22:52

Your are the Best of all the times. Keep going Team.

imran maseru · 06-09-2021, 05:44

Please help me sir my cm2 dongel is not working DONGEL IDENTIFAFICATION DATA DAMASED

kamal_singla · 06-09-2021, 06:25

Quote:

Originally Posted by imran maseru

Please help me sir my cm2 dongel is not working DONGEL IDENTIFAFICATION DATA DAMASED

https://forum.gsmhosting.com/vbb/f29...tions-2972970/

KYEJUSA · 06-09-2021, 08:46

Quote:

Originally Posted by JayDi

Most probably because device premanently locked, right?

and infinity consume my 5credits when phone not unlocked i check now i have 15 credits ,,kindly check it.

JayDi · 06-09-2021, 08:50

Quote:

Originally Posted by KYEJUSA

and infinity consume my 5credits when phone not unlocked i check now i have 15 credits ,,kindly check it.

You didnt answer on question.

JayDi · 06-09-2021, 08:51

Quote:

Originally Posted by jason_ach

Itel S15 Pro L6002P bootloop problem,after write firmware with CM2SP2 phone won't boot (dead).Write same firmware with UpgradeDownload_R23.19.4001 phone revive this is log:

Code:

Operation : Identify [ v2.12 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9863x_BASE : SC9863_eMMC_2GB_RS
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : 0x0004
FDL :  EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : Control transfered!

Boot Done!

Device info : 
Patch Level    : PPR1.180610.011
Display ID     : L6002P-F6308-9.0-OP-V055-20200102
Ver. Incmt     : OP-V055-20200102
Ver. CodeName  : REL
Ver. Release   : 9
Sec. Patch     : 2019-12-05
Build Time     : 02.01.2020
Product Model  : itel L6002P
Product Brand  : Itel
Product Name   : F6308
Product Device : itel-L6002P
Product Manfct : itel
Product Info   : L6002P
Product Board  : L6002P
Board Platform : sp9863a
Product Name   : L6002P
Product Device : L6002P


Platform Version: MOCORTM_18B_ITEL_W19.28.5_P5.02_Debug
Project Version:   sharkl3_pub
BASE  Version:    FM_BASE_18B_ITEL_W19.28.5_P5.02
HW Version:        sc9863A_modem
CMP_Time : 01-15-2020 21:25:46

MODEM TAG : MOCORTM_18B_ITEL_W19.28.5_P5.02_Debug_FM_BASE_18B_ITEL_W19.28.5_P5.02_sc9863A_modem_sharkl3_pub

USERDATA : FILESYSTEM : F2FS  with FDE ( Full Disk Encryption ***)

 - > INFO : Remove cable from device to switch it off!

Done!
Elapsed: 00:01:18



Open : L6002P-F6308-9.0-OP-V077-20210406_1703_user.pac
VER : BP_R1.0.0
LEN : 3,99 GiB
CPU : s9863a1h10
VER : L6002P-F6308-9.0-OP-V077-20210406_1703-user

Reading package ... 
Read package finished!

Patch Level    : PPR1.180610.011
Display ID     : L6002P-F6308-9.0-OP-V077-20210406
Ver. Incmt     : OP-V077-20210406
Ver. CodeName  : REL
Ver. Release   : 9
Sec. Patch     : 2021-04-05
Build Time     : 06.04.2021
Product Model  : itel L6002P
Product Brand  : Itel
Product Name   : F6308
Product Device : itel-L6002P
Product Manfct : itel
Product Info   : L6002P
Product Board  : L6002P
Board Platform : sp9863a
Product Name   : L6002P
Product Device : L6002P

Operation : Flash Firmware [ v2.12 ]

Setting   : Update NVRAM : False
Setting   : Force NVRAM : False
Setting   : Update PMT   : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : PAC : L6002P-F6308-9.0-OP-V077-20210406_1703_user.pac
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : 0x0004
FDL :  EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x26
PMTMng : Update PMT Ok!

Prepare target ...
Prepare Ok!

CODE  : gnssbdmodem.bin
CODE  : PM_sharkl3_cm4.bin
UBOOT : u-boot-sign.bin
CODE  : sharkl3_pubcp_DM_DSP.bin
CODE  : recovery.img
CODE  : SC9600_sharkl3_pubcp_modem.dat
CODE  : sharkl3_cm4.bin
CODE  : sharkl3_pubcp_LTEA_DSP.bin
FSIMG  : userdata.img
CODE  : logo.bmp(1)
FSIMG  : vendor.img
ERASE : L_RUNTIMENV1
CODE  : boot.img
UBOOT : u-boot-spl-16k-sign.bin
ERASE : UBOOT
CODE  : dtb.img
CODE  : tos-sign.bin
CODE  : sml-sign.bin
CODE  : prodnv.img
FSIMG  : cache.img
ERASE : UBOOT_LOG
CODE  : sharkl3_pubcp_deltanv.bin
CODE  : cover.img
CODE  : dtbo.img
FSIMG  : product.img
ERASE : MISC
CODE  : vbmeta-sign.img
CODE  : gnssmodem.bin
FSIMG  : persist.img
CODE  : logo.bmp
FSIMG  : system.img
Flashing finished!
Reconnect Power/Cable!

Done!
Elapsed: 00:04:16

Please tell me what is wrong?flashing with CM2SP2 phone won't boot.Flashing same firmware L6002P-F6308-9.0-OP-V077-20210406.zip with UpgradeDownload_R23.19.4001 phone work perfect

Interest case, thanks for info. We will get such device in near few days and will test all. Most probably it uses APR tags, which must be enabled, not had such device till now to check out.

KYEJUSA · 06-09-2021, 09:00

Quote:

Originally Posted by JayDi

Most probably because device premanently locked, right?

we cant tell when phone permanently locked cause phone kam working in specified simcard,,so when try unlocking brings that error,,....no way to check if permanently locked or no.

JayDi · 06-09-2021, 09:04

Quote:

Originally Posted by KYEJUSA

we cant tell when phone permanently locked cause phone kam working in specified simcard,,so when try unlocking brings that error,,....no way to check if permanently locked or no.

So, it is work with some sim?

Could you read NV from it and send for check?

KYEJUSA · 06-09-2021, 09:41

Quote:

Originally Posted by JayDi

So, it is work with some sim?

Could you read NV from it and send for check?

yes its working with provider sim card,,,,if reading nv is supported via diag mode i can read it cause in flash mode it does not ..

KYEJUSA · 06-09-2021, 10:02

Operation : Read NVM [ v2.12 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

BuildInfo : sp9832e_1h10_gofu-user 10 QP1A.190711.020 26221 release-keys

Platform Version: MOCORTM_18A_W20.04.1_Debug
Project Version: sharkle_Smart_Phone
BASE Version: FM_BASE_18A_W20.04.1
HW Version: sc9832e_modem

MODEM TAG : MOCORTM_18A_W20.04.1_Debug_FM_BASE_18A_W20.04.1_sc 9832e_modem_sharkle_Smart_Phone

NVMng : SecurityInfo
IMEI[1] : 352478113758587
IMEI[2] : 867400020316620
WIFIMAC : F86C03191B04
BT_MAC : F86C03911B04
SEC : SLS:2, SKS:0, SKV:4

NVMng : Reading NV. Please, wait ...
NVMng : Backup Ok , 0x000C5EA4

NVMng : Saved as : 352478113758587_diag.nvm
NVMng : Saved to : C:\InfinityBox\CM2SP2\Backup\352478113758587\
Reconnect Power/Cable!

Done!
Elapsed: 00:01:27

i have succesfully read it and uploaded via infinity ios.

06-08-2021, 15:58	#77 (permalink)
KYEJUSA No Life Poster Join Date: Nov 2006 Location: DEATH VALLEY Posts: 1,459 Member: 394869 Status: Offline Sonork: TAKE NO CHANCES Thanks Meter: 500	WHY NEW VERSION SHOW THIS; 1. Power off device, wait 10-15 seconds 2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! Enter SVC ... Waiting Device ... Check SVC ... SVC : DiagChannel opened! Boot Done! SOC GEN : UniSoc ( E-family and Modern ) BuildInfo : sp9832e_1h10_gofu-user 10 QP1A.190711.020 26221 release-keys Platform Version: MOCORTM_18A_W20.04.1_Debug Project Version: sharkle_Smart_Phone BASE Version: FM_BASE_18A_W20.04.1 HW Version: sc9832e_modem MODEM TAG : MOCORTM_18A_W20.04.1_Debug_FM_BASE_18A_W20.04.1_sc 9832e_modem_sharkle_Smart_Phone NVMng : SecurityInfo IMEI[1] : 352478113758587 IMEI[2] : 867400020316620 WIFIMAC : F86C03191B04 BT_MAC : F86C03911B04 SEC : SLS:2, SKS:0, SKV:4 SLStatus : 3C Status : Locked! Server unlock required! Connecting to server... Connected Init... Init: Ok Authenticating... Authenticated Checking Client version... Client version Ok Balance: 15, price:5 Process... Process failed : Wrong SS - device security damaged Reconnect Power/Cable! Operation : SP Unlock [ v2.12 ] BootMode : SVC 1. Power off device, wait 10-15 seconds 2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! Enter SVC ... Waiting Device ... Check SVC ... SVC : DiagChannel opened! Boot Done! SOC GEN : UniSoc ( E-family and Modern ) BuildInfo : sp9832e_1h10_gofu-user 10 QP1A.190711.020 26221 release-keys Platform Version: MOCORTM_18A_W20.04.1_Debug Project Version: sharkle_Smart_Phone BASE Version: FM_BASE_18A_W20.04.1 HW Version: sc9832e_modem MODEM TAG : MOCORTM_18A_W20.04.1_Debug_FM_BASE_18A_W20.04.1_sc 9832e_modem_sharkle_Smart_Phone NVMng : SecurityInfo IMEI[1] : 352478113758587 IMEI[2] : 867400020316620 WIFIMAC : F86C03191B04 BT_MAC : F86C03911B04 SEC : SLS:2, SKS:0, SKV:4 SLStatus : 3C Status : Locked! Server unlock required! Connecting to server... Connected Init... Init: Ok Authenticating... Authenticated Checking Client version... Client version Ok Balance: 15, price:5 Process... Process failed : Wrong SS - device security damaged Reconnect Power/Cable!

06-08-2021, 20:31	#80 (permalink)
jason_ach Insane Poster Join Date: May 2014 Location: Rabat,Morocco Posts: 81 Member: 2183315 Status: Offline Thanks Meter: 21	Itel S15 Pro L6002P bootloop problem,after write firmware with CM2SP2 phone won't boot (dead).Write same firmware with UpgradeDownload_R23.19.4001 phone revive this is log: Operation : Identify [ v2.12 ] BootMode : FLASH 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! BootVersion : SPRD3 Boot : INF : 0_SC9863x_BASE : SC9863_eMMC_2GB_RS Sending Init Boot ... Boot sent! Kick FDL ... BootVersion : Spreadtrum Boot Block version 1.1 Protocol setup ... Port speed : 921600 Sending Flash Boot ... Boot sent! Kick FLASH FDL ... FDL : 0x0004 FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False FDL : Control transfered! Boot Done! Device info : Patch Level : PPR1.180610.011 Display ID : L6002P-F6308-9.0-OP-V055-20200102 Ver. Incmt : OP-V055-20200102 Ver. CodeName : REL Ver. Release : 9 Sec. Patch : 2019-12-05 Build Time : 02.01.2020 Product Model : itel L6002P Product Brand : Itel Product Name : F6308 Product Device : itel-L6002P Product Manfct : itel Product Info : L6002P Product Board : L6002P Board Platform : sp9863a Product Name : L6002P Product Device : L6002P Platform Version: MOCORTM_18B_ITEL_W19.28.5_P5.02_Debug Project Version: sharkl3_pub BASE Version: FM_BASE_18B_ITEL_W19.28.5_P5.02 HW Version: sc9863A_modem CMP_Time : 01-15-2020 21:25:46 MODEM TAG : MOCORTM_18B_ITEL_W19.28.5_P5.02_Debug_FM_BASE_18B_ ITEL_W19.28.5_P5.02_sc9863A_modem_sharkl3_pub USERDATA : FILESYSTEM : F2FS with FDE ( Full Disk Encryption ***) - > INFO : Remove cable from device to switch it off! Done! Elapsed: 00:01:18 Open : L6002P-F6308-9.0-OP-V077-20210406_1703_user.pac VER : BP_R1.0.0 LEN : 3,99 GiB CPU : s9863a1h10 VER : L6002P-F6308-9.0-OP-V077-20210406_1703-user Reading package ... Read package finished! Patch Level : PPR1.180610.011 Display ID : L6002P-F6308-9.0-OP-V077-20210406 Ver. Incmt : OP-V077-20210406 Ver. CodeName : REL Ver. Release : 9 Sec. Patch : 2021-04-05 Build Time : 06.04.2021 Product Model : itel L6002P Product Brand : Itel Product Name : F6308 Product Device : itel-L6002P Product Manfct : itel Product Info : L6002P Product Board : L6002P Board Platform : sp9863a Product Name : L6002P Product Device : L6002P Operation : Flash Firmware [ v2.12 ] Setting : Update NVRAM : False Setting : Force NVRAM : False Setting : Update PMT : True 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! BootVersion : SPRD3 Boot : PAC : L6002P-F6308-9.0-OP-V077-20210406_1703_user.pac Sending Init Boot ... Boot sent! Kick FDL ... BootVersion : Spreadtrum Boot Block version 1.1 Protocol setup ... Port speed : 921600 Sending Flash Boot ... Boot sent! Kick FLASH FDL ... FDL : 0x0004 FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False FDL : Control transfered! Boot Done! PMTMng : Load PMT PMTMng : 0x26 PMTMng : Update PMT Ok! Prepare target ... Prepare Ok! CODE : gnssbdmodem.bin CODE : PM_sharkl3_cm4.bin UBOOT : u-boot-sign.bin CODE : sharkl3_pubcp_DM_DSP.bin CODE : recovery.img CODE : SC9600_sharkl3_pubcp_modem.dat CODE : sharkl3_cm4.bin CODE : sharkl3_pubcp_LTEA_DSP.bin FSIMG : userdata.img CODE : logo.bmp(1) FSIMG : vendor.img ERASE : L_RUNTIMENV1 CODE : boot.img UBOOT : u-boot-spl-16k-sign.bin ERASE : UBOOT CODE : dtb.img CODE : tos-sign.bin CODE : sml-sign.bin CODE : prodnv.img FSIMG : cache.img ERASE : UBOOT_LOG CODE : sharkl3_pubcp_deltanv.bin CODE : cover.img CODE : dtbo.img FSIMG : product.img ERASE : MISC CODE : vbmeta-sign.img CODE : gnssmodem.bin FSIMG : persist.img CODE : logo.bmp FSIMG : system.img Flashing finished! Reconnect Power/Cable! Done! Elapsed: 00:04:16 Please tell me what is wrong?flashing with CM2SP2 phone won't boot.Flashing same firmware L6002P-F6308-9.0-OP-V077-20210406.zip with UpgradeDownload_R23.19.4001 phone work perfect

06-08-2021, 22:52	#81 (permalink)
fallon100 Junior Member Join Date: Mar 2016 Location: SCOTTLAND Posts: 8 Member: 2546224 Status: Offline Thanks Meter: 0	Your are the Best of all the times. Keep going Team.

06-09-2021, 05:44	#82 (permalink)
imran maseru Junior Member Join Date: Apr 2016 Posts: 15 Member: 2561480 Status: Offline Sonork: patelimran Thanks Meter: 1	Please help me sir my cm2 dongel is not working DONGEL IDENTIFAFICATION DATA DAMASED

06-09-2021, 10:02	#90 (permalink)
KYEJUSA No Life Poster Join Date: Nov 2006 Location: DEATH VALLEY Posts: 1,459 Member: 394869 Status: Offline Sonork: TAKE NO CHANCES Thanks Meter: 500	Operation : Read NVM [ v2.12 ] BootMode : SVC 1. Power off device, wait 10-15 seconds 2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! Enter SVC ... Waiting Device ... Check SVC ... SVC : DiagChannel opened! Boot Done! BuildInfo : sp9832e_1h10_gofu-user 10 QP1A.190711.020 26221 release-keys Platform Version: MOCORTM_18A_W20.04.1_Debug Project Version: sharkle_Smart_Phone BASE Version: FM_BASE_18A_W20.04.1 HW Version: sc9832e_modem MODEM TAG : MOCORTM_18A_W20.04.1_Debug_FM_BASE_18A_W20.04.1_sc 9832e_modem_sharkle_Smart_Phone NVMng : SecurityInfo IMEI[1] : 352478113758587 IMEI[2] : 867400020316620 WIFIMAC : F86C03191B04 BT_MAC : F86C03911B04 SEC : SLS:2, SKS:0, SKV:4 NVMng : Reading NV. Please, wait ... NVMng : Backup Ok , 0x000C5EA4 NVMng : Saved as : 352478113758587_diag.nvm NVMng : Saved to : C:\InfinityBox\CM2SP2\Backup\352478113758587\ Reconnect Power/Cable! Done! Elapsed: 00:01:27 i have succesfully read it and uploaded via infinity ios.