GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 06-27-2021, 09:00   #1 (permalink)
Product Supporter
 
Join Date: Jun 2009
Posts: 32,041
Member: 1043909
Status: Offline
Thanks Meter: 57,704
Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.13 - Boot RSA Auth activated


As ordinary, unique functions and methods released

Core
Changed: FlashCore protocol updated
Changed: Automatic detection and use loaders with PMTInfo
Changed: FlashLoader authentification [RSA and AES] activated ( brand-specific )
- Allow service over FlashMode models, which require remote authentification
- Supproted Brand lines: Itel - all RSA-auth enabled models
- Supported default prod auth - Generic models, RSA and AES
- After sucessfull auth you have full access to any service operations - flash read, write, frp, repair
- Feature require Internet access and valid IOS username and password
- Feature is free and unlimited for all currently supported models

Flasher
Changed: Protocol updated

Firmware reader
Changed: New range of generic and brand-specific models support for safe and complete Firmware Read
Changed: NAND support revised

Model DB
Changed: Moto G20 (XT-2821-X line) included in list (support under test)

Other
Changed: Some changes and fixes

SPD unlock supported models


Download link #1

Download link #2

Download link #3


Infinity-Box as nobody else since year 2005



Last edited by YellowBoss; 07-11-2021 at 09:37.
  Reply With Quote
The Following 35 Users Say Thank You to YellowBoss For This Useful Post:
Show/Hide list of the thanked
Old 06-27-2021, 09:00   #2 (permalink)
Product Supporter
 
Join Date: Jun 2009
Posts: 32,041
Member: 1043909
Status: Offline
Thanks Meter: 57,704
Dear Sirs,

If you have good flash files and if you want to share it with other users please use IOS File Uploader Tool



Please upload only GOOD WORKING files without password
  Reply With Quote
The Following 10 Users Say Thank You to YellowBoss For This Useful Post:
Show/Hide list of the thanked
Old 06-27-2021, 09:08   #3 (permalink)
Junior Member
 
Join Date: Mar 2019
Posts: 7
Member: 2898797
Status: Offline
Sonork: 100.1680109
Thanks Meter: 2
Wow nice

Great update team that is what we call an update
  Reply With Quote
The Following 2 Users Say Thank You to killerjr007 For This Useful Post:
Old 06-27-2021, 11:17   #4 (permalink)
Freak Poster
 
Join Date: Jun 2013
Posts: 282
Member: 1958094
Status: Offline
Thanks Meter: 41
Not its free

" Feature is free and unlimited for all currently supported models "

BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : MANUAL LDR
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

NVMng : SecurityInfo
IMEI[1] : 863685040573093
IMEI[2] : 867400020316620
IMEI[3] : 867400020316638
WIFIMAC : FFFFFFFFFFFF
BT_MAC : FFFFFFFFFFFF
SEC : SLS:2, SKS:0, SKV:0


New SecInfo :
IMEI[1] : 352184523621536

NVMng : Using server support

Connecting to server...
Connected
Init...
Init: Ok
Authenticating...
Authenticated
Checking Client version...
Client version Ok
Balance: 0, price:5
Process...
Process failed : 62 order failure
Disconnected
  Reply With Quote
Old 06-27-2021, 11:45   #5 (permalink)
Freak Poster
 
Join Date: Jun 2013
Posts: 282
Member: 1958094
Status: Offline
Thanks Meter: 41
Quote:
Originally Posted by zapata13 View Post
Not its free

" Feature is free and unlimited for all currently supported models "

BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : MANUAL LDR
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

NVMng : SecurityInfo
IMEI[1] : 863685040573093
IMEI[2] : 867400020316620
IMEI[3] : 867400020316638
WIFIMAC : FFFFFFFFFFFF
BT_MAC : FFFFFFFFFFFF
SEC : SLS:2, SKS:0, SKV:0


New SecInfo :
IMEI[1] : 352184523621536

NVMng : Using server support

Connecting to server...
Connected
Init...
Init: Ok
Authenticating...
Authenticated
Checking Client version...
Client version Ok
Balance: 0, price:5
Process...
Process failed : 62 order failure
Disconnected

5crd for operation

Operation : Repair Security [ v2.13 ]

BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : MANUAL LDR
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

NVMng : SecurityInfo
IMEI[1] : 863685040573093
IMEI[2] : 867400020316620
IMEI[3] : 867400020316638
WIFIMAC : FFFFFFFFFFFF
BT_MAC : FFFFFFFFFFFF
SEC : SLS:2, SKS:0, SKV:0


New SecInfo :
IMEI[1] : 352184523621536
IMEI[2] : 352184523621536

NVMng : Using server support

Connecting to server...
Connected
Init...
Init: Ok
Authenticating...
Authenticated
Checking Client version...
Client version Ok
Balance: 5, price:5
Process...
Finished

NVMng : Item updated!
NVMng : Post-Process Ok!


Done!
Elapsed: 00:00:33
  Reply With Quote
Old 06-27-2021, 12:18   #6 (permalink)
No Life Poster
 
JayDi's Avatar
 
Join Date: Mar 2007
Posts: 18,036
Member: 462970
Status: Offline
Thanks Meter: 19,455
Quote:
Originally Posted by zapata13 View Post
5crd for operation

Code:
Operation : Repair Security [ v2.13 ]

BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : MANUAL LDR
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : 0x0008
FDL :  EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

NVMng  : SecurityInfo 
IMEI[1] : 863685040573093
IMEI[2] : 867400020316620
IMEI[3] : 867400020316638
WIFIMAC : FFFFFFFFFFFF
BT_MAC  : FFFFFFFFFFFF
SEC : SLS:2, SKS:0, SKV:0


New SecInfo : 
IMEI[1] : 352184523621536
IMEI[2] : 352184523621536

NVMng  : Using server support

Connecting to server...
Connected
Init...
Init: Ok
Authenticating...
Authenticated
Checking Client version...
Client version Ok
Balance: 5,  price:5
Process...
Finished

NVMng  : Item updated!
NVMng  : Post-Process Ok!


Done!
Elapsed: 00:00:33
Quote:
Originally Posted by zapata13 View Post
Not its free

" Feature is free and unlimited for all currently supported models "

Code:
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : MANUAL LDR
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : 0x0008
FDL :  EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

NVMng  : SecurityInfo 
IMEI[1] : 863685040573093
IMEI[2] : 867400020316620
IMEI[3] : 867400020316638
WIFIMAC : FFFFFFFFFFFF
BT_MAC  : FFFFFFFFFFFF
SEC : SLS:2, SKS:0, SKV:0


New SecInfo : 
IMEI[1] : 352184523621536

NVMng  : Using server support

Connecting to server...
Connected
Init...
Init: Ok
Authenticating...
Authenticated
Checking Client version...
Client version Ok
Balance: 0,  price:5
Process...
Process failed : 62 order failure
Disconnected
You don't read update logs.

It allow BOOT new security type phones for free, but not free unlock/repair.
  Reply With Quote
The Following 3 Users Say Thank You to JayDi For This Useful Post:
Show/Hide list of the thanked
Old 06-27-2021, 12:19   #7 (permalink)
No Life Poster
 
JayDi's Avatar
 
Join Date: Mar 2007
Posts: 18,036
Member: 462970
Status: Offline
Thanks Meter: 19,455
During 2 week test period users made over 900 sucessfull auth!
  Reply With Quote
The Following 6 Users Say Thank You to JayDi For This Useful Post:
Show/Hide list of the thanked
Old 06-27-2021, 12:45   #8 (permalink)
Freak Poster
 
Join Date: Apr 2006
Posts: 299
Member: 255977
Status: Offline
Thanks Meter: 24
Card found : 80CB8E77 , v0149
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.13

Load IDBase v8331 Ok!


Open : W6502-F3108-10.0-OP-V029-20210408.pac
VER : BP_R1.0.0
LEN : 2.68 GiB
CPU : sp7731e_1h10
VER : W6502-F3108-10.0-OP-V029-20210408_1645-user

Reading package ...
Read package finished!

Product Brand : Itel
Product Device : W6502
Product Model : itel W6502
Product Name : W6502
Patch Level : QP1A.190711.020
Display ID : W6502-F3108-10.0-OP-V029-20210408
Ver. Incmt : OP-V029-20210408
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2021-04-05
Build Time : 08.04.2021
Product Name : F3108
Product Device : itel-W6502
Product Info : W6502
Product Board : W6502
Board Platform : sp7731e
Product Manfct : itel

Operation : Flash Firmware [ v2.13 ]

Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
>>> ERROR : Protocol HandShake failed!

>>> Error : Fail to init protocol!
>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Flash Firmware [ v2.13 ]

Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : W6502-F3108-10.0-OP-V029-20210408.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
FDL : SEC : RSA auth passed!
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x28
PMTMng : Update PMT Ok!

Prepare target ...
ERROR : 0000008E:80000000FF7F7E00
INT : WAIT TIMEOUT! DEVICE PROBLEM or WRONG FDL!


>>> Error : Flashing failed!
>>> Check previous message for more info!

Reconnect Power/Cable!

Operation : Read FW [ v2.13 ]
Extra : Ignore CriticalPart Verify : Enabled

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : W6502-F3108-10.0-OP-V029-20210408.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
FDL : SEC : RSA auth passed!
FDL : Control transfered!

Boot Done!


>>> Error : Device NOT INITIALIZED ! Initialize it first via "IDENTIFY" !
>>> Make sure you have made "IDENTIFY" first!

Reconnect Power/Cable!

Operation : Identify [ v2.13 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : W6502-F3108-10.0-OP-V029-20210408.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
FDL : SEC : RSA auth passed!
FDL : Control transfered!

Boot Done!

Device info :
Product Brand : Itel
Product Device : W6502
Product Model : itel W6502
Product Name : W6502
Patch Level : QP1A.190711.020
Display ID : W6502-F3108-10.0-OP-V029-20210408
Ver. Incmt : OP-V029-20210408
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2021-04-05
Build Time : 08.04.2021
Product Name : F3108
Product Device : itel-W6502
Product Info : W6502
Product Board : W6502
Board Platform : sp7731e
Product Manfct : itel


Platform Version: MOCORTM_17C_W20.21.2_P9_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W20.21.2_P9
HW Version: sc7731e_modem
CMP_Time : 01-28-2021 11:10:37

MODEM TAG : MOCORTM_17C_W20.21.2_P9_Debug_FM_BASE_17C_W20.21.2 _P9_sc7731e_modem_pike2_pub

USERDATA : FILESYSTEM : F2FS with FDE ( Full Disk Encryption ***)

- > INFO : Remove cable from device to switch it off!

Done!
Elapsed: 00:01:46

Operation : Flash Firmware [ v2.13 ]

Setting : Update NVRAM : True
Setting : Force NVRAM : True
Setting : SlowSparse Fix : True
Setting : Update PMT : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
>>> ERROR : Protocol HandShake failed!

>>> Error : Fail to init protocol!
>>> Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Flash Firmware [ v2.13 ]

Setting : Update NVRAM : True
Setting : Force NVRAM : True
Setting : SlowSparse Fix : True
Setting : Update PMT : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : W6502-F3108-10.0-OP-V029-20210408.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
FDL : SEC : RSA auth passed!
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x28
PMTMng : Update PMT Ok!

NVRM : pike2_pubcp_PLD_base_nv_nvitem.bin
NVMng : Load 0x17
NVMng : Init SRC
NVMng : SecurityInfo
IMEI[1] : 359471081135014
IMEI[2] : 359471081135014
IMEI[3] : 867400020316638
WIFIMAC : FFFFFFFFFFFF
BT_MAC : FFFFFFFFFFFF
SEC : SLS:0, SKS:0, SKV:4

NVMng : Backup Ok , 0x00066B50
NVMng : Init DST
NVMng : Rx11 : Wx10
NVMng : NVM block updated!

Prepare target ...
ERROR : 0000008E:80000000FF7F7E00
INT : WAIT TIMEOUT! DEVICE PROBLEM or WRONG FDL!


>>> Error : Flashing failed!
>>> Check previous message for more info!

Reconnect Power/Cable!

Operation : Flash Firmware [ v2.13 ]

Setting : Update NVRAM : True
Setting : Force NVRAM : True
Setting : SlowSparse Fix : True
Setting : Update PMT : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : W6502-F3108-10.0-OP-V029-20210408.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
FDL : SEC : RSA auth passed!
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x28
PMTMng : Update PMT Ok!

NVRM : pike2_pubcp_PLD_base_nv_nvitem.bin
NVMng : Load 0x17
NVMng : Init SRC
NVMng : SecurityInfo
IMEI[1] : 359471081135014
IMEI[2] : 359471081135014
IMEI[3] : 867400020316638
WIFIMAC : FFFFFFFFFFFF
BT_MAC : FFFFFFFFFFFF
SEC : SLS:0, SKS:0, SKV:4

NVMng : Backup Ok , 0x00066B50
NVMng : Init DST
NVMng : Rx11 : Wx10
NVMng : NVM block updated!

Prepare target ...
ERROR : 0000008E:80000000FF7F7E00
INT : WAIT TIMEOUT! DEVICE PROBLEM or WRONG FDL!


>>> Error : Flashing failed!
>>> Check previous message for more info!

Reconnect Power/Cable!

Operation : Format FS / Reset Settings [ v2.13 ]
Mode : Forced [ Format FS / Fix ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : W6502-F3108-10.0-OP-V029-20210408.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
FDL : SEC : RSA auth passed!
FDL : Control transfered!

Boot Done!

Wipe Ok : Forced Wipe
Wipe Ok : Forced Wipe

Reconnect Power/Cable!

Done!
Elapsed: 00:01:51

Operation : Flash Firmware [ v2.13 ]

Setting : Update NVRAM : True
Setting : Force NVRAM : True
Setting : SlowSparse Fix : True
Setting : Update PMT : True

Setting : WholeFLASH FORMAT : True
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : W6502-F3108-10.0-OP-V029-20210408.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
FDL : SEC : RSA auth passed!
FDL : Control transfered!

Boot Done!

ERASE : FORMAT WHOLE FLASH ...
ERASE : FORMAT FLASH Completed!

PMTMng : Load PMT
PMTMng : 0x28
PMTMng : Update PMT Ok!

NVRM : pike2_pubcp_PLD_base_nv_nvitem.bin
NVMng : Load 0x17
NVMng : Init SRC
NVMng : Trying use recover mode
NVMng : Security DAMAGED!
NVMng : Backup Ok , 0x00100000
NVMng : Trying use recover mode
NVMng : Init DST
NVMng : NV has been destroyed! Forced Update enabled! Repair security after!
NVMng : NVM block updated!

Prepare target ...
ERROR : 0000008E:80000000FF7F7E00
INT : WAIT TIMEOUT! DEVICE PROBLEM or WRONG FDL!


>>> Error : Flashing failed!
>>> Check previous message for more info!

Reconnect Power/Cable!

Operation : Flash Firmware [ v2.13 ]

Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : False

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : W6502-F3108-10.0-OP-V029-20210408.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
FDL : SEC : RSA auth passed!
FDL : Control transfered!

Boot Done!

Prepare target ...
ERROR : 0000008E:80000000FF7F7E00
INT : WAIT TIMEOUT! DEVICE PROBLEM or WRONG FDL!


>>> Error : Flashing failed!
>>> Check previous message for more info!

Reconnect Power/Cable!

flashing failed any help
  Reply With Quote
The Following User Says Thank You to lgarapo For This Useful Post:
Old 06-27-2021, 12:54   #9 (permalink)
No Life Poster
 
Yusuf Lawal's Avatar
 
Join Date: Oct 2011
Location: Nigeria
Posts: 6,481
Member: 1677653
Status: Online
Thanks Meter: 2,679
@Igarapo,

What do you want to achieve exactly?

In what state the device now?
  Reply With Quote
Old 06-27-2021, 13:00   #10 (permalink)
Freak Poster
 
Join Date: Apr 2006
Posts: 299
Member: 255977
Status: Offline
Thanks Meter: 24
trying to flash the device hangs and reboots itel w6502
All flashing attempts hang on preparing device
  Reply With Quote
Old 06-27-2021, 13:05   #11 (permalink)
Freak Poster
 
Join Date: Apr 2006
Posts: 299
Member: 255977
Status: Offline
Thanks Meter: 24
another device w6503 error on flashing

Operation : Flash Firmware [ v2.13 ]

Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : W6503-F3115-10.0-OP-V022-20201230_1850_user.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
FDL : SEC : RSA auth passed!
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x28
PMTMng : Update PMT Ok!

Prepare target ...
ERROR : 0000008E:00000000FF7F0000
INT : WAIT TIMEOUT! DEVICE PROBLEM or WRONG FDL!


>>> Error : Flashing failed!
>>> Check previous message for more info!

Reconnect Power/Cable!

Last edited by lgarapo; 06-27-2021 at 13:14.
  Reply With Quote
Old 06-27-2021, 15:34   #12 (permalink)
No Life Poster
 
JayDi's Avatar
 
Join Date: Mar 2007
Posts: 18,036
Member: 462970
Status: Offline
Thanks Meter: 19,455
@lgarapo, don't smash buttons for fun.
Is second one alive?
It wont flash it, because not accept / can't verify signatures.


1. Try flash just UBOOT and SPL.
2. Try read FW from alive one and reflash to faulty. Let us know results after.
3. Try with V026 also (on support), to check.
  Reply With Quote
The Following 2 Users Say Thank You to JayDi For This Useful Post:
Old 06-27-2021, 21:19   #13 (permalink)
Product Supporter
 
Join Date: Jun 2009
Posts: 32,041
Member: 1043909
Status: Offline
Thanks Meter: 57,704
Quote:
Originally Posted by zapata13 View Post
Not its free

" Feature is free and unlimited for all currently supported models "

BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : MANUAL LDR
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

NVMng : SecurityInfo
IMEI[1] : 863685040573093
IMEI[2] : 867400020316620
IMEI[3] : 867400020316638
WIFIMAC : FFFFFFFFFFFF
BT_MAC : FFFFFFFFFFFF
SEC : SLS:2, SKS:0, SKV:0


New SecInfo :
IMEI[1] : 352184523621536

NVMng : Using server support

Connecting to server...
Connected
Init...
Init: Ok
Authenticating...
Authenticated
Checking Client version...
Client version Ok
Balance: 0, price:5
Process...
Process failed : 62 order failure
Disconnected
Authorization is free


UNLOCK is not free (as before) for newest models.
If you do not know the difference please read info and learn before post.
Thank you!
  Reply With Quote
The Following User Says Thank You to YellowBoss For This Useful Post:
Old 06-27-2021, 21:20   #14 (permalink)
Product Supporter
 
Join Date: Jun 2009
Posts: 32,041
Member: 1043909
Status: Offline
Thanks Meter: 57,704
@kamrulsohan
Fake news not allowed here
Your fake news post was deleted.

Do not forget to use "?" sign if you ask a question and use search before post.
Thank you!
  Reply With Quote
The Following User Says Thank You to YellowBoss For This Useful Post:
Old 06-28-2021, 03:47   #15 (permalink)
Junior Member
 
Join Date: Apr 2011
Posts: 30
Member: 1563468
Status: Offline
Sonork: featuring
Thanks Meter: 2
Hello infinity team , i have a working ios account with my infinitybest, can i still login with that account on cm2sp2 as my auth
  Reply With Quote
The Following User Says Thank You to kisekka For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 12:45.



Powered by Searchlight © 2021 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.10708 seconds with 8 queries

SEO by vBSEO