GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 09-28-2021, 16:04   #46 (permalink)
Freak Poster
 
Join Date: Dec 2015
Posts: 182
Member: 2499853
Status: Offline
Thanks Meter: 32

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : PR651H-F6317-11.0-OP-V043-20210729.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
Server Error : Access denied: {"Message":"Access denied `aminu` auth"}
>>> ERROR : Server process failed!
>>> ERROR : FLASH FDL AUTHENTIFICATION FAILED!

>>> Error : Fail to boot FDL!
>>> Check previous message for more info!

Reconnect Power/Cable!
  Reply With Quote
Old 09-28-2021, 16:05   #47 (permalink)
Freak Poster
 
Join Date: Dec 2015
Posts: 182
Member: 2499853
Status: Offline
Thanks Meter: 32
error android 11

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : PR651H-F6317-11.0-OP-V043-20210729.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
Server Error : Access denied: {"Message":"Access denied `aminu` auth"}
>>> ERROR : Server process failed!
>>> ERROR : FLASH FDL AUTHENTIFICATION FAILED!

>>> Error : Fail to boot FDL!
>>> Check previous message for more info!

Reconnect Power/Cable!
  Reply With Quote
Old 09-29-2021, 11:15   #48 (permalink)
Insane Poster
 
Join Date: May 2015
Posts: 81
Member: 2393670
Status: Offline
Thanks Meter: 11
Itel w6501 (s15 pro) not supported but i selected the model

Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Itel : itel W6501
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!
  Reply With Quote
Old 09-29-2021, 12:18   #49 (permalink)
Insane Poster
 
Join Date: Feb 2017
Location: Uzbekiston
Posts: 99
Member: 2684254
Status: Offline
Sonork: 1-212-228-9600
Thanks Meter: 53
Realme C11 2021 RMX3231 imei repair error



Quote:
Operation : Repair Security [ v2.14 ]

BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Realme : RMX3231
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!


>>> Error : Device NOT INITIALIZED ! Initialize it first via "IDENTIFY" !
>>> Make sure you have made "IDENTIFY" first!

Reconnect Power/Cable!
  Reply With Quote
Old 09-29-2021, 12:44   #50 (permalink)
Insane Poster
 
Join Date: May 2015
Posts: 81
Member: 2393670
Status: Offline
Thanks Meter: 11
Itel w6501 (s15 pro) not supported

Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Itel : itel W6501
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!






READ INFO BY DIAG MODE

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : W6501-F3111-9.0-OP2-V022-20210402
MemoryInfo : EMMC : 32 GB ; DRAM : 2 GB

Platform Version: MOCORTM_17C_ITEL_RLS2_W19.28.5_P8_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_ITEL_RLS2_W19.28.5_P8
HW Version: sc7731e_modem
CMP_Time : 08-28-2020 00:46:28

MODEM TAG : MOCORTM_17C_ITEL_RLS2_W19.28.5_P8_Debug_FM_BASE_17 C_ITEL_RLS2_W19.28.5_P8_sc7731e_modem_pike2_pub


PSN1 : 0569635066013067

NVMng : SecurityInfo
IMEI[1] : 353812116667909
IMEI[2] : 353812116667917
WIFIMAC : 40D25F6F5399
BT_MAC : 40D25F6F5398
SEC : SLS:0, SKS:0, SKV:4


Done!
Elapsed: 00:00:24
  Reply With Quote
Old 09-29-2021, 13:51   #51 (permalink)
No Life Poster
 
kamal_singla's Avatar
 
Join Date: Jun 2014
Location: https://t.me/kamal_singla
Age: 28
Posts: 4,781
Member: 2211790
Status: Offline
Thanks Meter: 4,763
Quote:
Originally Posted by kasykasy View Post
Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : Itel : itel W6501
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!






READ INFO BY DIAG MODE

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices - 1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : W6501-F3111-9.0-OP2-V022-20210402
MemoryInfo : EMMC : 32 GB ; DRAM : 2 GB

Platform Version: MOCORTM_17C_ITEL_RLS2_W19.28.5_P8_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_ITEL_RLS2_W19.28.5_P8
HW Version: sc7731e_modem
CMP_Time : 08-28-2020 00:46:28

MODEM TAG : MOCORTM_17C_ITEL_RLS2_W19.28.5_P8_Debug_FM_BASE_17 C_ITEL_RLS2_W19.28.5_P8_sc7731e_modem_pike2_pub




PSN1 : 0569635066013067

NVMng : SecurityInfo
IMEI[1] : 353812116667909
IMEI[2] : 353812116667917
WIFIMAC : 40D25F6F5399
BT_MAC : 40D25F6F5398
SEC : SLS:0, SKS:0, SKV:4


Done!
Elapsed: 00:00:24
Replace (C:\InfinityBox\CM2SP2\Boot\Itel )here and restart exe select model repeat
https://mega.nz/file/Q1RySLKR#brA3tJ...pp7O60KLrLjM6A
  Reply With Quote
Old 09-30-2021, 07:11   #52 (permalink)
No Life Poster
 
JayDi's Avatar
 
Join Date: Mar 2007
Posts: 18,244
Member: 462970
Status: Offline
Thanks Meter: 19,785
Quote:
Originally Posted by Jorabek-1987 View Post
Realme C11 2021 RMX3231 imei repair error
You can't repair security on REALME.
  Reply With Quote
The Following 2 Users Say Thank You to JayDi For This Useful Post:
Old 09-30-2021, 07:12   #53 (permalink)
No Life Poster
 
JayDi's Avatar
 
Join Date: Mar 2007
Posts: 18,244
Member: 462970
Status: Offline
Thanks Meter: 19,785
Quote:
Originally Posted by aminudonatos View Post
Code:
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : PAC : PR651H-F6317-11.0-OP-V043-20210729.pac
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : 0x0020
FDL :  EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ... 
Server Error : Access denied: {"Message":"Access denied `aminu` auth"}
>>>   ERROR : Server process failed!
>>>   ERROR : FLASH FDL AUTHENTIFICATION FAILED!

>>>  Error : Fail to boot FDL!
>>>  Check previous message for more info!

Reconnect Power/Cable!
Just read again and set correct login and pwd.
  Reply With Quote
The Following 3 Users Say Thank You to JayDi For This Useful Post:
Show/Hide list of the thanked
Old 09-30-2021, 09:18   #54 (permalink)
Freak Poster
 
Join Date: Nov 2013
Location: pakistan gujrat lalamusa
Age: 37
Posts: 345
Member: 2067643
Status: Offline
Sonork: 1611265
Thanks Meter: 108
zte blade a7 2019 imei repair problem
after repair no network and block

Operation : Repair Security [ v2.14 ]

BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : ZTE : ZTE_BLADE_A5_A7_[2019]
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0004
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : Control transfered!

Boot Done!

NVMng : SecurityInfo
IMEI[1] : 359835081210466
IMEI[2] : 359835081210466
IMEI[3] : 867400020316638

SEC : SLS:2, SKS:0, SKV:0


New SecInfo :
IMEI[1] : 359835081210466
IMEI[2] : 359835086210461
IMEI[3] : 359835081210466

>>> Info : Signed device, security repair may lead to break device!

NVMng : Item updated!
NVMng : Post-Process Ok!


Done!
Elapsed: 00:02:00
  Reply With Quote
Old 09-30-2021, 14:51   #55 (permalink)
Junior Member
 
Join Date: Oct 2013
Posts: 18
Member: 2045602
Status: Offline
Thanks Meter: 0
pls am having issue with my cm2 dongle. it brings card misconfigurations.

Username: 00FDC5A942
  Reply With Quote
Old 09-30-2021, 15:45   #56 (permalink)
Product Supporter
 
Join Date: Jun 2009
Posts: 32,643
Member: 1043909
Status: Offline
Thanks Meter: 58,189
Quote:
Originally Posted by ali cletus View Post
pls am having issue with my cm2 dongle. it brings card misconfigurations.

Username: 00FDC5A942
You got an answer week ago https://forum.infinity-box.com/viewt...hp?f=17&t=2131
  Reply With Quote
Old 09-30-2021, 15:47   #57 (permalink)
Product Supporter
 
Join Date: Jun 2009
Posts: 32,643
Member: 1043909
Status: Offline
Thanks Meter: 58,189
Quote:
Originally Posted by aminudonatos View Post
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : PR651H-F6317-11.0-OP-V043-20210729.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
Server Error : Access denied: {"Message":"Access denied `aminu` auth"}

>>> ERROR : Server process failed!
>>> ERROR : FLASH FDL AUTHENTIFICATION FAILED!

>>> Error : Fail to boot FDL!
>>> Check previous message for more info!

Reconnect Power/Cable!
Go to software `Settings` and enter your IOS Username and Password, see video https://www.youtube.com/watch?v=KogYDEkg-O8
  Reply With Quote
The Following User Says Thank You to YellowBoss For This Useful Post:
Old 09-30-2021, 16:43   #58 (permalink)
Product Supporter
 
Join Date: Jun 2009
Posts: 32,643
Member: 1043909
Status: Offline
Thanks Meter: 58,189
Quote:
Originally Posted by ali cletus View Post
pls am having issue with my cm2 dongle. it brings card misconfigurations.

Username: 00FDC5A942
Still waiting for the answer
  Reply With Quote
Old 09-30-2021, 17:46   #59 (permalink)
Junior Member
 
Join Date: May 2011
Posts: 28
Member: 1568053
Status: Offline
Thanks Meter: 4
Thanks Team for good update .
  Reply With Quote
Old 09-30-2021, 19:35   #60 (permalink)
Product Supporter
 
Join Date: Jun 2009
Posts: 32,643
Member: 1043909
Status: Offline
Thanks Meter: 58,189
Quote:
Originally Posted by iftikharrana58 View Post
zte blade a7 2019 imei repair problem
after repair no network and block

Operation : Repair Security [ v2.14 ]

BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : ZTE : ZTE_BLADE_A5_A7_[2019]
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0004
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : Control transfered!

Boot Done!

NVMng : SecurityInfo
IMEI[1] : 359835081210466
IMEI[2] : 359835081210466
IMEI[3] : 867400020316638

SEC : SLS:2, SKS:0, SKV:0


New SecInfo :
IMEI[1] : 359835081210466
IMEI[2] : 359835086210461
IMEI[3] : 359835081210466

>>> Info : Signed device, security repair may lead to break device!

NVMng : Item updated!
NVMng : Post-Process Ok!


Done!
Elapsed: 00:02:00
What was the problem BEFORE repair?
Also no network?
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 01:25.



Powered by Searchlight © 2021 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.23661 seconds with 8 queries

SEO by vBSEO