Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.14 - A/B support and more - Page 8 - GSM-Forum

yuslamunique · 11-08-2021, 23:06

Please add Unlock Bootloader in next update

geo/mobile · 11-10-2021, 08:47

Identif

Code:

Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : Itel : itel L6501
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : 0x0008
FDL :  EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0001
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ... 
FDL : SEC : RSA auth passed!
FDL : Control transfered!

Boot Done!

Device info : 
Patch Level    : PPR1.180610.011
Display ID     : L6501-F6311-9.0-OP-V048-20210913
Ver. Incmt     : OP-V048-20210913
Ver. CodeName  : REL
Ver. Release   : 9
Sec. Patch     : 2021-09-05
Build Time     : 13.09.2021
Product Model  : itel L6501
Product Brand  : Itel
Product Name   : F6311
Product Device : itel-L6501
Product Manfct : itel
Product Info   : L6501
Product Board  : L6501
Board Platform : sp9863a
Product Name   : L6501
Product Device : L6501


Platform Version: MOCORTM_18B_ITEL_W19.28.5_P16_Debug
Project Version:   sharkl3_pub
BASE  Version:    FM_BASE_18B_ITEL_W19.28.5_P16
HW Version:        sc9863A_modem
CMP_Time : 08-24-2021 01:37:58

MODEM TAG : MOCORTM_18B_ITEL_W19.28.5_P16_Debug_FM_BASE_18B_ITEL_W19.28.5_P16_sc9863A_modem_sharkl3_pub

USERDATA : FILESYSTEM : F2FS  with FDE ( Full Disk Encryption ***)

 - > INFO : Remove cable from device to switch it off!

Done!
Elapsed: 00:02:14

Reset Settings + FRP

Code:

Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : Itel : itel L6501
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : 0x0008
FDL :  EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0001
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ... 
FDL : SEC : RSA auth passed!
FDL : Control transfered!

Boot Done!

Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP

Reconnect Power/Cable!

Done!
Elapsed: 00:00:15

miaccountguider · 11-10-2021, 21:31

Thanks for the good update about latest spd chipset smartphone

debeliamark · 11-18-2021, 18:57

The phone A1 Alpha was so popular in 2019 like cheapest SP branded unit in Bulgaria / Belarus ect... The original one is ZTE xxx.

The readout:

Code:

Operation : Read FW [ v2.13 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : PAC : A1_EU_P963F01V1.0.0B11_DL.pac
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : 0x0004
FDL :  EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : Control transfered!

Boot Done!

Device info : 
Patch Level    : PPR1.180610.011
Display ID     : A1_Alpha_EEA_B14
Ver. Incmt     : 20200116.232039
Ver. CodeName  : REL
Ver. Release   : 9
Sec. Patch     : 2020-01-05
Build Time     : 16.01.2020
Product Model  : A1 Alpha
Product Brand  : A1
Product Name   : A1_AT_EEA_P963F01
Product Device : P963F01D
Product Manfct : A1
Product Info   : P963F01D
Product Name   : s9863a1h10_Natv
Product Device : s9863a1h10
Product Board  : sprout
Board Platform : sp9863a

AndroidVer : 9
VlnrLevel : 0x02

SP9863A__A1__A1_Alpha__9__A1_Alpha_EEA_B14__PPR1.180610.011__P963F01D

Read : u-boot.bin
Read : sml.bin
Read : tos.bin
Read : vbmeta.img
Read : dtb.img
Read : dtbo.img
Read : ldsp_l.bin
Read : gdsp_l.bin
Read : modem_l.bin
Read : nvitem_l.bin
Read : modem_wcn.img
Read : gnssmodem.bin
Read : gnssbdmodem.bin
Read : pm_sys.bin
Read : boot.img
Read : recovery.img
Make : persist.img
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Read : system.img
Read : vendor.img
Read : otp_product.img
ExtSparse : Compression ratio : 1%
Make : userdata.img
Make : cache.img
Read : prodnv.img
ExtSparse : Compression ratio : 9%
Read : deltanv_l.bin
Read : phase.cfg
Read : ztecfg.bin
Read : ztepersist.bin
ExtSparse : Compression ratio : 16%
Read : u-boot-spl.bin

Waiting for device ... 
ADB : Device found!
ADB : Connected!
ADB : Prepare Ok!
Cookies!
Wait for something to happen ...
Mankind should survive

Firmware size : 0x103EB6A6C ( 4,06 GiB )
Android Info saved : _Android_info.txt
Reconnect Power/Cable!

Done!
Elapsed: 00:18:54

Is missing version B14 are packed and ready for download here.

BR, DebeliaMark, BG

GODISTHEBEST · 11-18-2021, 20:31

Tank you infinity team for the support and new fetures
pls tell as if there is a way to unlock service provider lock of spd 9832E XIAOMI QIN 1S+
thank you in advance !

JayDi · 11-22-2021, 18:50

Quote:

Originally Posted by GODISTHEBEST

Tank you infinity team for the support and new fetures
pls tell as if there is a way to unlock service provider lock of spd 9832E XIAOMI QIN 1S+
thank you in advance !

did you try make SPUnlock? what a result?
Diag or flash.

debeliamark · 11-23-2021, 11:16

There is a readout from strange phone, named iHunt APEX S20 Plus [ Same as Invens MAX 5 ]:

Code:

Device info : 
Patch Level    : PPR1.180610.011
Display ID     : J106E_iHunt_S20 Plus Apex_B18_12816_V1.0_20201102
Ver. Incmt     : 43318
Ver. CodeName  : REL
Ver. Release   : 9
Sec. Patch     : 2019-12-05
Build Time     : 02.11.2020
Product Model  : MAX5
Product Brand  : Invens
Product Name   : MAX5
Product Device : MAX5
Product Manfct : Invens
Product Info   : MAX5
Product Board  : sp7731e_1h10
Board Platform : sp7731e

AndroidVer : 9
VlnrLevel : 0x02

It was hard to find it for free, so get it from my link if someone need it.

BR, DebeliaMark, BG

mortal90210 · 11-24-2021, 07:19

Hi team

log is here
--------------------------------------
Operation : Identify [ v2.11 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : OPM2.171019.012
Display ID : Z518_PLUM_V1.0_20180903
Ver. Incmt : 36114
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-08-05
Build Time : 03.09.2018
Product Model : Z518
Product Brand : PLUM
Product Name : Z518
Product Device : Z518
Product Board : Z518
Product Manfct : TEM
Product Info : sp7731e_fs286
Product Board : sp7731e_fs286
Board Platform : sp7731e

Platform Version: MOCORTM_17C_W18.23.4_P5_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W18.23.4_P5
HW Version: sc7731e_modem
CMP_Time : 07-31-2018 11:14:32

MODEM TAG : MOCORTM_17C_W18.23.4_P5_Debug_FM_BASE_17C_W18.23.4 _P5_sc7731e_modem_pike2_pub

USERDATA : FILESYSTEM : F2FS with FDE ( Full Disk Encryption ***)

- > INFO : Remove cable from device to switch it off!

Done!
Elapsed: 00:01:57

Operation : Format FS / Reset Settings [ v2.11 ]
Mode : Reset FRP
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

Wipe Ok : FRP

Reconnect Power/Cable!

Done!
Elapsed: 00:00:49

IMEI_info · 11-25-2021, 19:21

Realme C21Y RMX3263 can't read info and any other operation always this can add in the next update?
This device got Unisoc T612 CPU and is the same as T610 CPU just a little faster.

Quote:

Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_UT61x_BASE : UT61x_eMMC_4GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
>>> ERROR : FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!

JayDi · 11-25-2021, 21:50

Did you try check in Realme brand list?

IMEI_info · 11-25-2021, 23:19

Yes, I try not work.
Mean in realme tab is only RMX3231 or SC9863.
I try boot like RMX3231 and not work too.

Quote:

Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
>>> ERROR : Protocol HandShake failed!

>>> Error : Fail to init protocol!
>>> Remove battery, cable. Check cable and connection. Repeat operation!

Working firmware got here that found and flash to device with SPD upgrade tool to reset the phone.
https://mega.nz/file/sr4lXQLL#zNd6PJ...0Mt_ho0lY79oX8

JayDi · 11-25-2021, 23:25

Quote:

Originally Posted by IMEI_info

Yes, I try not work.
Mean in realme tab is only RMX3231 or SC9863.
I try boot like RMX3231 and not work too.

Connect device in FLASH mode, not in diag.

Log says you had try diag one. Hold side keys to force flash one.

Artemius · 11-27-2021, 17:39

Hi Gents!

Need your advice,I read firmware via spd2 and when i trying to flash it back i getint error
UBOOT : u-boot-spl.bin
Failed to update block!
ERROR : 0000008E:00000000FF7F0000
INT : WAIT TIMEOUT! DEVICE PROBLEM or WRONG FDL!

this error i geting on most phone with normal emmc, so it means that i do smething wrong but what?

JayDi · 11-27-2021, 17:55

Quote:

Originally Posted by Artemius

Hi Gents!

Need your advice,I read firmware via spd2 and when i trying to flash it back i getint error
UBOOT : u-boot-spl.bin
Failed to update block!
ERROR : 0000008E:00000000FF7F0000
INT : WAIT TIMEOUT! DEVICE PROBLEM or WRONG FDL!

this error i geting on most phone with normal emmc, so it means that i do smething wrong but what?

Hello, please, post complete log.

Also, you may try change working loader :
Select FW, select in platform tab, from model list appropriate loader for device, try flash.
What a result?

Artemius · 11-27-2021, 18:09

Always problem with this "UBOOT : u-boot-spl.bin" file
Its from last log

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0002
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x20
PMTMng : Update PMT Ok!

Prepare target ...
Prepare Ok!

UBOOT : u-boot.bin
UBOOT : u-boot.bin
CODE : sml.bin
CODE : sml.bin
CODE : tos.bin
CODE : tos.bin
CODE : vbmeta.img
CODE : vbmeta.img
CODE : pm_sys.bin
CODE : modem_w.bin
CODE : gdsp_w.bin
CODE : modem_wcn.img
CODE : gnssmodem.bin
CODE : gnssbdmodem.bin
CODE : boot_logo.bmp
CODE : fastboot_logo.bmp
FSIMG : persist.img
CODE : boot.img
CODE : recovery.img
FSIMG : system.img
FSIMG : vendor.img
FSIMG : userdata.img
FSIMG : cache.img
FSIMG : prodnv.img
UBOOT : u-boot-spl.bin
Failed to update block!
ERROR : 0000008E:00000000FF7F0000
INT : WAIT TIMEOUT! DEVICE PROBLEM or WRONG FDL!

>>> Error : Flashing failed!
>>> Check previous message for more info!

Reconnect Power/Cable!

11-18-2021, 20:31	#110 (permalink)
GODISTHEBEST Freak Poster Join Date: Dec 2015 Age: 46 Posts: 417 Member: 2496790 Status: Offline Thanks Meter: 11	hi Tank you infinity team for the support and new fetures pls tell as if there is a way to unlock service provider lock of spd 9832E XIAOMI QIN 1S+ thank you in advance !

11-23-2021, 11:16	#112 (permalink)
debeliamark No Life Poster Join Date: May 2001 Location: Bulgaria Age: 56 Posts: 4,796 Member: 4627 Status: Offline Sonork: 57528:debeliamark Thanks Meter: 1,034	iHunt Apex S20 Plus Readout There is a readout from strange phone, named iHunt APEX S20 Plus [ Same as Invens MAX 5 ]: Code: Device info : Patch Level : PPR1.180610.011 Display ID : J106E_iHunt_S20 Plus Apex_B18_12816_V1.0_20201102 Ver. Incmt : 43318 Ver. CodeName : REL Ver. Release : 9 Sec. Patch : 2019-12-05 Build Time : 02.11.2020 Product Model : MAX5 Product Brand : Invens Product Name : MAX5 Product Device : MAX5 Product Manfct : Invens Product Info : MAX5 Product Board : sp7731e_1h10 Board Platform : sp7731e AndroidVer : 9 VlnrLevel : 0x02 It was hard to find it for free, so get it from my link if someone need it. BR, DebeliaMark, BG

11-24-2021, 07:19	#113 (permalink)
mortal90210 Freak Poster Join Date: Nov 2005 Posts: 394 Member: 199340 Status: Offline Sonork: 100.1592925 Thanks Meter: 192	Plum spd 7731 frp reset done Hi team log is here -------------------------------------- Operation : Identify [ v2.11 ] BootMode : FLASH 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! BootVersion : SPRD3 Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_0S Sending Init Boot ... Boot sent! Kick FDL ... BootVersion : Spreadtrum Boot Block version 1.1 Protocol setup ... Port speed : 921600 Sending Flash Boot ... Boot sent! Kick FLASH FDL ... FDL : 0x0008 FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True FDL : RAW : 0x0002 FDL : FLH : 0x400000 FDL : Control transfered! Boot Done! Device info : Patch Level : OPM2.171019.012 Display ID : Z518_PLUM_V1.0_20180903 Ver. Incmt : 36114 Ver. CodeName : REL Ver. Release : 8.1.0 Sec. Patch : 2018-08-05 Build Time : 03.09.2018 Product Model : Z518 Product Brand : PLUM Product Name : Z518 Product Device : Z518 Product Board : Z518 Product Manfct : TEM Product Info : sp7731e_fs286 Product Board : sp7731e_fs286 Board Platform : sp7731e Platform Version: MOCORTM_17C_W18.23.4_P5_Debug Project Version: pike2_pub BASE Version: FM_BASE_17C_W18.23.4_P5 HW Version: sc7731e_modem CMP_Time : 07-31-2018 11:14:32 MODEM TAG : MOCORTM_17C_W18.23.4_P5_Debug_FM_BASE_17C_W18.23.4 _P5_sc7731e_modem_pike2_pub USERDATA : FILESYSTEM : F2FS with FDE ( Full Disk Encryption ***) - > INFO : Remove cable from device to switch it off! Done! Elapsed: 00:01:57 Operation : Format FS / Reset Settings [ v2.11 ] Mode : Reset FRP BootMode : FLASH 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! BootVersion : SPRD3 Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_0S Sending Init Boot ... Boot sent! Kick FDL ... BootVersion : Spreadtrum Boot Block version 1.1 Protocol setup ... Port speed : 921600 Sending Flash Boot ... Boot sent! Kick FLASH FDL ... FDL : 0x0008 FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True FDL : RAW : 0x0002 FDL : FLH : 0x400000 FDL : Control transfered! Boot Done! Wipe Ok : FRP Reconnect Power/Cable! Done! Elapsed: 00:00:49

11-08-2021, 23:06	#106 (permalink)
yuslamunique Freak Poster Join Date: Jul 2021 Location: Nigeria Posts: 403 Member: 2993572 Status: Offline Thanks Meter: 164	Please add Unlock Bootloader in next update

11-10-2021, 21:31	#108 (permalink)
miaccountguider Junior Member Join Date: Aug 2021 Location: Dhaka Posts: 18 Member: 2994353 Status: Offline Thanks Meter: 4	Thanks for the good update about latest spd chipset smartphone

11-25-2021, 21:50	#115 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	Did you try check in Realme brand list?

11-27-2021, 17:39	#118 (permalink)
Artemius Insane Poster Join Date: Oct 2013 Location: Turkmenistan, Balkanabat Posts: 76 Member: 2044809 Status: Offline Thanks Meter: 11	Hi Gents! Need your advice,I read firmware via spd2 and when i trying to flash it back i getint error UBOOT : u-boot-spl.bin Failed to update block! ERROR : 0000008E:00000000FF7F0000 INT : WAIT TIMEOUT! DEVICE PROBLEM or WRONG FDL! this error i geting on most phone with normal emmc, so it means that i do smething wrong but what?

11-27-2021, 18:09	#120 (permalink)
Artemius Insane Poster Join Date: Oct 2013 Location: Turkmenistan, Balkanabat Posts: 76 Member: 2044809 Status: Offline Thanks Meter: 11	Always problem with this "UBOOT : u-boot-spl.bin" file Its from last log 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! BootVersion : SPRD3 Boot : INF : INFINITY FW PACKAGE Sending Init Boot ... Boot sent! Kick FDL ... BootVersion : Spreadtrum Boot Block version 1.1 Protocol setup ... Port speed : 921600 Sending Flash Boot ... Boot sent! Kick FLASH FDL ... FDL : 0x0002 FDL : Control transfered! Boot Done! PMTMng : Load PMT PMTMng : 0x20 PMTMng : Update PMT Ok! Prepare target ... Prepare Ok! UBOOT : u-boot.bin UBOOT : u-boot.bin CODE : sml.bin CODE : sml.bin CODE : tos.bin CODE : tos.bin CODE : vbmeta.img CODE : vbmeta.img CODE : pm_sys.bin CODE : modem_w.bin CODE : gdsp_w.bin CODE : modem_wcn.img CODE : gnssmodem.bin CODE : gnssbdmodem.bin CODE : boot_logo.bmp CODE : fastboot_logo.bmp FSIMG : persist.img CODE : boot.img CODE : recovery.img FSIMG : system.img FSIMG : vendor.img FSIMG : userdata.img FSIMG : cache.img FSIMG : prodnv.img UBOOT : u-boot-spl.bin Failed to update block! ERROR : 0000008E:00000000FF7F0000 INT : WAIT TIMEOUT! DEVICE PROBLEM or WRONG FDL! >>> Error : Flashing failed! >>> Check previous message for more info! Reconnect Power/Cable!