GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 01-17-2020, 14:19   #121 (permalink)
Freak Poster
 
Join Date: Aug 2014
Location: khulna bangladash
Posts: 288
Member: 2243325
Status: Offline
Sonork: 01715634715
Thanks Meter: 26
Donate money to this user

=== DongleManager [Infinity] v1.70 [2020-01-17 19:16:48] ===
Searching...
Card-Reader: Alcor Micro USB Smart Card Reader 0
HWID: 0100985818201292
Box/Dongle found: [BEST]
Serial No (S/N): A7359858
Firmware version: 0122.02
Box/Dongle misconfiguration
Diagnostic code: 30
"UK Edition" status: On
Last launched Application: 0031 v.0122
=> Activations:
- 03: [BEST] v.0122
- 07: module #07
- 0A: Test Version
Diagnostic Key: 7FD91DFE0656C72C
=> External Activations:
- Micro-Box
carde not open halp me sir
  Reply With Quote
Old 01-17-2020, 14:20   #122 (permalink)
Freak Poster
 
Join Date: Aug 2014
Location: khulna bangladash
Posts: 288
Member: 2243325
Status: Offline
Sonork: 01715634715
Thanks Meter: 26
Donate money to this user
== DongleManager [Infinity] v1.70 [2020-01-16 21:16:03] ===
Box/Dongle type selected: [BEST]
Card-Reader: Alcor Micro USB Smart Card Reader 0
HWID: 0100985818201292
Box/Dongle found: [BEST]
Reading...
Serial No (S/N): A7359858
Firmware version: 0122.02
=== Process started: 2020-01-16 21:16:04 ===
Connecting to server
Server connection successfully established
Checking DongleManager version...
Your DongleManager is up-to-date
Checking Dongle Identification...
Authenticating on server...
Authentication stage error:
Server answer:[0031] Dongle identification data damaged.
Contact to http://www.infinity-box.com/support/?r=2
halp me sir
  Reply With Quote
Old 01-17-2020, 14:21   #123 (permalink)
Freak Poster
 
Join Date: Aug 2014
Location: khulna bangladash
Posts: 288
Member: 2243325
Status: Offline
Sonork: 01715634715
Thanks Meter: 26
Donate money to this user
halp me sir
my wave khulnaunlock.com
  Reply With Quote
Old 01-17-2020, 15:08   #124 (permalink)
Junior Member
 
Join Date: Nov 2015
Posts: 6
Member: 2489396
Status: Offline
Thanks Meter: 2
Why is it need dongle firmware update?
  Reply With Quote
Old 01-17-2020, 15:28   #125 (permalink)
Product Supporter
 
Join Date: Jun 2009
Posts: 33,730
Member: 1043909
Status: Offline
Thanks Meter: 58,968
Quote:
Originally Posted by sami-mobil View Post
Why is it need dongle firmware update?
because dongle has some kind of special functions and new software require new dongle firmware
  Reply With Quote
Old 01-17-2020, 15:29   #126 (permalink)
Product Supporter
 
Join Date: Jun 2009
Posts: 33,730
Member: 1043909
Status: Offline
Thanks Meter: 58,968
Quote:
Originally Posted by gsmshapla View Post
== DongleManager [Infinity] v1.70 [2020-01-16 21:16:03] ===
Box/Dongle type selected: [BEST]
Card-Reader: Alcor Micro USB Smart Card Reader 0
HWID: 0100985818201292
Box/Dongle found: [BEST]
Reading...
Serial No (S/N): A7359858
Firmware version: 0122.02
=== Process started: 2020-01-16 21:16:04 ===
Connecting to server
Server connection successfully established
Checking DongleManager version...
Your DongleManager is up-to-date
Checking Dongle Identification...
Authenticating on server...
Authentication stage error:
Server answer:[0031] Dongle identification data damaged.
Contact to http://www.infinity-box.com/support/?r=2
halp me sir
as I can see you have updated dongle firmware well today. Right ?
  Reply With Quote
Old 01-17-2020, 15:30   #127 (permalink)
Product Supporter
 
Join Date: Jun 2009
Posts: 33,730
Member: 1043909
Status: Offline
Thanks Meter: 58,968
Quote:
Originally Posted by sanaththaranga View Post

please help team.
thanks
Hello,

It looks like your dongle support period is expired.
How to check - https://www.infinity-box.com/doc/?r=17

If support is expired please contact to your seller and renew support - https://www.infinity-box.com/buy/
  Reply With Quote
Old 01-17-2020, 23:49   #128 (permalink)
Junior Member
 
Join Date: Apr 2017
Posts: 1
Member: 2702450
Status: Offline
Thanks Meter: 0
hello ,please how can I download and install cm2 MTK2
  Reply With Quote
Old 01-18-2020, 12:21   #129 (permalink)
Junior Member
 
Join Date: May 2016
Posts: 1
Member: 2576799
Status: Offline
Thanks Meter: 0
No se puede actualizar el firmware de la caja infinity box
  Reply With Quote
Old 01-18-2020, 17:54   #130 (permalink)
No Life Poster
 
johnmadzeka1's Avatar
 
Join Date: Apr 2015
Location: Harare Zimbabwe
Age: 40
Posts: 897
Member: 2377686
Status: Offline
Sonork: 100.1668474
Thanks Meter: 303
Donate money to this user
Exclamation Hisense u605-DF HV network locked NVM

NVM Dump here:

https://mega.nz/#!lNR1zArQ!JNOSRKo1w...cjAYsajHyJPL7M


Code:
Operation : Read NVM [ v2.04 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
Enter SVC ... 
Waiting Device ... 
Check SVC ... 
SVC : DiagChannel opened!

Boot Done!

BuildInfo : sp7731e_fs280_project-user 8.1.0 OPM2.171019.012 49415 release-keys
SecInfo   : ABCDC8BECCCFA0CECEA0CEC7A0CFF5F5

Platform Version: MOCORTM_17C_W18.23.4_P20_Debug
Project Version:   pike2_pub
BASE  Version:    FM_BASE_17C_W18.23.4_P20
HW Version:        sc7731e_modem
CMP_Time : 02-25-2019 18:03:32
MODEM TAG : MOCORTM_17C_W18.23.4_P20_Debug_FM_BASE_17C_W18.23.4_P20_sc7731e_modem_pike2_pub

SecInfo : 
IMEI[1] : 867790xxxxxxxxxx
IMEI[2] : 867400xxxxxxxxxx
WIFIMAC : 08BA5F5FDD6A
BT_MAC  : 08BA5F5F2424

NVMng  : Reading NV. Please, wait ...
NVMng  : Backup Ok , 0x00066C18

NVMng  : Saved as : 867790042783785_ABCDC8BECCCFA0CECEA0CEC7A0CFF5F5_diag.nvm
NVMng  : Saved to : C:\InfinityBox\CM2SP2\Backup\86779xxxxxxxxxx\
Reconnect Power/Cable!


Done!
Elapsed: 00:00:52

Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.04

Load IDBase v1119 Ok!


Operation : Identify [ v2.04 ]
BootMode : SVC

1. Power off device, wait 10-15 seconds
2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
Enter SVC ... 
Waiting Device ... 
Check SVC ... 
SVC : DiagChannel opened!

Boot Done!

SOC GEN : UniSoc ( E-family and Modern )
BuildInfo : sp7731e_fs280_project-user 8.1.0 OPM2.171019.012 49415 release-keys
MemoryInfo : EMMC : 8 GB  ;  DRAM : 1 GB

ModemInfo :
Platform Version: MOCORTM_17C_W18.23.4_P20_Debug
Project Version:   pike2_pub
BASE  Version:    FM_BASE_17C_W18.23.4_P20
HW Version:        sc7731e_modem
CMP_Time : 02-25-2019 18:03:32



Done!
Elapsed: 00:00:45

Last edited by johnmadzeka1; 01-18-2020 at 17:57. Reason: nvm dump link
  Reply With Quote
The Following 2 Users Say Thank You to johnmadzeka1 For This Useful Post:
Old 01-19-2020, 01:46   #131 (permalink)
Freak Poster
 
Join Date: Dec 2015
Posts: 398
Member: 2496790
Status: Offline
Thanks Meter: 11
i mistackly wrote that i can read firmware . acually i can not

i need help pls !!!!!
first the sc9820e can be recognized in the software. and i can read even nv data here is log
*************
*************
Wait for device ...

Device Connected!
Enter SVC ...
Waiting Device ...
Check SVC ...
SVC : DiagChannel opened!

Boot Done!

BuildInfo : sp9820e_1h10_native-user 4.4.4 KTU84P 54 dev-keys
SecInfo : ABCEBDA7CACFA0CECCA0CCCAA0CCCCF5F5

Platform Version: MOCORTM_17B_Release_W18.47.2_Debug
Project Version: sharkle_Feature_Phone
BASE Version: FM_BASE_17B_Release_W18.47.2
HW Version: sc9820e_modem
MODEM TAG : MOCORTM_17B_Release_W18.47.2_Debug_FM_BASE_17B_Rel ease_W18.47.2_sc9820e_modem_sharkle_Feature_Phone

SecInfo :
IMEI[1] : 352352550069949
IMEI[2] : 352352550069949
WIFIMAC : 10DF8B0D52FF
BT_MAC : 4045DA00A2F9

NVMng : Reading NV. Please, wait ...
NVMng : Backup Ok , 0x000C62A4

NVMng : Saved as : _2nd_351953050069949_ABCEBDA7CACFA0CECCA0CCCAA0CCC CF5F5_diag.nvm
NVMng : Saved to : C:\InfinityBox\CM2SP2\Backup\352352550069949\
Reconnect Power/Cable!
Done!
Elapsed: 00:00:46
***************
***************
but i can not write it again to any phone
BTW if i will write the nv data to another phone will it change the International Mobile Equipment Identity ? without network connection and if at all will change ?
2. also the reading firmware can not be done even if i push the L SHIFT button ? what can be the problem ? cuase you can see that the drivers are ok but the Functioning is not !
( in the previos post you can see in the log that the reading is not working ?
3. and the L.SHIFT button need to be press only for 1 second ,when i pushing the "read" button or the whole time of reading?
4. does reducing the port speed will help ?
THANK YOU IN ADVANCE
*******************
******************* HERE IS THE LOG WHEN IT IS TRYING TO READ FIRMWARE******
*****************
Wait for device ...

Device Connected!
ERROR : Protocol HandShake failed!

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!
******************
  Reply With Quote
Old 01-19-2020, 03:20   #132 (permalink)
Freak Poster
 
Join Date: Jul 2006
Posts: 113
Member: 305558
Status: Offline
Thanks Meter: 27
MyPhone MyG1 Flashing failed.

Code:
Card found : 82F , v0139
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.04

Load IDBase v1119 Ok!


Operation : Identify [ v2.04 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : Control transfered!

Boot Done!


UserData : STATE : DAMAGED


Done!
Elapsed: 00:00:50

Operation : Identify [ v2.04 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : Control transfered!

Boot Done!


UserData : STATE : DAMAGED


Done!
Elapsed: 00:01:03

Open : SPD_PROG.xml
Reading package ... 
Read package finished!

Created by Infinity-Box (c) 2019
Chinese Miracle II : Spreadtrum / UniSoc Service Module
Device Info file   : _Android_info.txt

Patch Level    : P00610
Display ID     : S556M_MYG1_20190919_V1.14
Ver. CodeName  : REL
Ver. Release   : 9
Sec. Patch     : 2019-09-05
Build Time     : 1568859731
Product Model  : myG1
Product Brand  : MyPhone
Product Name   : myG1
Product Device : myG1
Product Manfct : MyPhone
Product Info   : myG1
Board Platform : sp7731e
Product Board  : sp7731e_1h10


Operation : Flash Firmware [ v2.04 ]

Setting   : Update NVRAM : False
Setting   : Force NVRAM : False
Setting   : Update PMT   : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
ERROR : FLASH FDL NOT started!

Error : Fail to boot FDL!
Unsupported device with selected fdl! Change settings!

Reconnect Power/Cable!

Operation : Flash Firmware [ v2.04 ]

Setting   : Update NVRAM : False
Setting   : Force NVRAM : False
Setting   : Update PMT   : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_2GB_RS
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
ERROR : FLASH FDL NOT started!

Error : Fail to boot FDL!
Unsupported device with selected fdl! Change settings!

Reconnect Power/Cable!

Operation : Identify [ v2.04 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731C_eMMC_1GB_NS
Sending Init Boot ... 
ERROR : FDL Start Failed!

Error : Fail to boot FDL!
Unsupported device with selected fdl! Change settings!

Reconnect Power/Cable!

Operation : Identify [ v2.04 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : Control transfered!

Boot Done!


UserData : STATE : DAMAGED


Done!
Elapsed: 00:00:57

Operation : Flash Firmware [ v2.04 ]

Setting   : Update NVRAM : False
Setting   : Force NVRAM : False
Setting   : Update PMT   : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x24
PMTMng : Update failed!
ERROR  : 00000084:84000000FF7B7E00
SYS : OPERATION FAILED!


Error : Flashing failed!
Make sure device HW is ok, check battery and cable! Try hold BootKey at whole Flash Process

Reconnect Power/Cable!

Operation : Flash Firmware [ v2.04 ]

Setting   : Update NVRAM : False
Setting   : Force NVRAM : False
Setting   : Update PMT   : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x24
PMTMng : Update failed!
ERROR  : 00000084:84000000FF7B7E00
SYS : OPERATION FAILED!


Error : Flashing failed!
Make sure device HW is ok, check battery and cable! Try hold BootKey at whole Flash Process

Reconnect Power/Cable!

Open : SPD_PROG.xml
Reading package ... 
Read package finished!

Created by Infinity-Box (c) 2019
Chinese Miracle II : Spreadtrum / UniSoc Service Module
Device Info file   : _Android_info.txt

Patch Level    : P00610
Display ID     : S556M_MYG1_20190919_V1.14
Ver. CodeName  : REL
Ver. Release   : 9
Sec. Patch     : 2019-09-05
Build Time     : 1568859731
Product Model  : myG1
Product Brand  : MyPhone
Product Name   : myG1
Product Device : myG1
Product Manfct : MyPhone
Product Info   : myG1
Board Platform : sp7731e
Product Board  : sp7731e_1h10


Operation : Flash Firmware [ v2.04 ]

Setting   : Update NVRAM : False
Setting   : Force NVRAM : False
Setting   : Update PMT   : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
ERROR : FLASH FDL NOT started!

Error : Fail to boot FDL!
Unsupported device with selected fdl! Change settings!

Reconnect Power/Cable!
  Reply With Quote
Old 01-19-2020, 05:13   #133 (permalink)
Freak Poster
 
Join Date: Jan 2012
Location: Above the earth
Posts: 195
Member: 1711578
Status: Offline
Sonork: 100.1606127
Thanks Meter: 40
Quote:
Originally Posted by dbustamante2k View Post
MyPhone MyG1 Flashing failed.

Code:
Card found : 82F , v0139
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.04

Load IDBase v1119 Ok!


Operation : Identify [ v2.04 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : Control transfered!

Boot Done!


UserData : STATE : DAMAGED


Done!
Elapsed: 00:00:50

Operation : Identify [ v2.04 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : Control transfered!

Boot Done!


UserData : STATE : DAMAGED


Done!
Elapsed: 00:01:03

Open : SPD_PROG.xml
Reading package ... 
Read package finished!

Created by Infinity-Box (c) 2019
Chinese Miracle II : Spreadtrum / UniSoc Service Module
Device Info file   : _Android_info.txt

Patch Level    : P00610
Display ID     : S556M_MYG1_20190919_V1.14
Ver. CodeName  : REL
Ver. Release   : 9
Sec. Patch     : 2019-09-05
Build Time     : 1568859731
Product Model  : myG1
Product Brand  : MyPhone
Product Name   : myG1
Product Device : myG1
Product Manfct : MyPhone
Product Info   : myG1
Board Platform : sp7731e
Product Board  : sp7731e_1h10


Operation : Flash Firmware [ v2.04 ]

Setting   : Update NVRAM : False
Setting   : Force NVRAM : False
Setting   : Update PMT   : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
ERROR : FLASH FDL NOT started!

Error : Fail to boot FDL!
Unsupported device with selected fdl! Change settings!

Reconnect Power/Cable!

Operation : Flash Firmware [ v2.04 ]

Setting   : Update NVRAM : False
Setting   : Force NVRAM : False
Setting   : Update PMT   : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_2GB_RS
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
ERROR : FLASH FDL NOT started!

Error : Fail to boot FDL!
Unsupported device with selected fdl! Change settings!

Reconnect Power/Cable!

Operation : Identify [ v2.04 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731C_eMMC_1GB_NS
Sending Init Boot ... 
ERROR : FDL Start Failed!

Error : Fail to boot FDL!
Unsupported device with selected fdl! Change settings!

Reconnect Power/Cable!

Operation : Identify [ v2.04 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : Control transfered!

Boot Done!


UserData : STATE : DAMAGED


Done!
Elapsed: 00:00:57

Operation : Flash Firmware [ v2.04 ]

Setting   : Update NVRAM : False
Setting   : Force NVRAM : False
Setting   : Update PMT   : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x24
PMTMng : Update failed!
ERROR  : 00000084:84000000FF7B7E00
SYS : OPERATION FAILED!


Error : Flashing failed!
Make sure device HW is ok, check battery and cable! Try hold BootKey at whole Flash Process

Reconnect Power/Cable!

Operation : Flash Firmware [ v2.04 ]

Setting   : Update NVRAM : False
Setting   : Force NVRAM : False
Setting   : Update PMT   : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x24
PMTMng : Update failed!
ERROR  : 00000084:84000000FF7B7E00
SYS : OPERATION FAILED!


Error : Flashing failed!
Make sure device HW is ok, check battery and cable! Try hold BootKey at whole Flash Process

Reconnect Power/Cable!

Open : SPD_PROG.xml
Reading package ... 
Read package finished!

Created by Infinity-Box (c) 2019
Chinese Miracle II : Spreadtrum / UniSoc Service Module
Device Info file   : _Android_info.txt

Patch Level    : P00610
Display ID     : S556M_MYG1_20190919_V1.14
Ver. CodeName  : REL
Ver. Release   : 9
Sec. Patch     : 2019-09-05
Build Time     : 1568859731
Product Model  : myG1
Product Brand  : MyPhone
Product Name   : myG1
Product Device : myG1
Product Manfct : MyPhone
Product Info   : myG1
Board Platform : sp7731e
Product Board  : sp7731e_1h10


Operation : Flash Firmware [ v2.04 ]

Setting   : Update NVRAM : False
Setting   : Force NVRAM : False
Setting   : Update PMT   : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
ERROR : FLASH FDL NOT started!

Error : Fail to boot FDL!
Unsupported device with selected fdl! Change settings!

Reconnect Power/Cable!
change firmware..nasa ant yung tested nyan
  Reply With Quote
Old 01-19-2020, 15:10   #134 (permalink)
No Life Poster
 
JayDi's Avatar
 
Join Date: Mar 2007
Posts: 18,512
Member: 462970
Status: Offline
Thanks Meter: 20,241
Quote:
Originally Posted by dbustamante2k View Post
MyPhone MyG1 Flashing failed.

Code:
Card found : 82F , v0139
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.04

Load IDBase v1119 Ok!


Operation : Identify [ v2.04 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : Control transfered!

Boot Done!


UserData : STATE : DAMAGED


Done!
Elapsed: 00:00:50

Operation : Identify [ v2.04 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : Control transfered!

Boot Done!


UserData : STATE : DAMAGED


Done!
Elapsed: 00:01:03

Open : SPD_PROG.xml
Reading package ... 
Read package finished!

Created by Infinity-Box (c) 2019
Chinese Miracle II : Spreadtrum / UniSoc Service Module
Device Info file   : _Android_info.txt

Patch Level    : P00610
Display ID     : S556M_MYG1_20190919_V1.14
Ver. CodeName  : REL
Ver. Release   : 9
Sec. Patch     : 2019-09-05
Build Time     : 1568859731
Product Model  : myG1
Product Brand  : MyPhone
Product Name   : myG1
Product Device : myG1
Product Manfct : MyPhone
Product Info   : myG1
Board Platform : sp7731e
Product Board  : sp7731e_1h10


Operation : Flash Firmware [ v2.04 ]

Setting   : Update NVRAM : False
Setting   : Force NVRAM : False
Setting   : Update PMT   : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
ERROR : FLASH FDL NOT started!

Error : Fail to boot FDL!
Unsupported device with selected fdl! Change settings!

Reconnect Power/Cable!

Operation : Flash Firmware [ v2.04 ]

Setting   : Update NVRAM : False
Setting   : Force NVRAM : False
Setting   : Update PMT   : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_2GB_RS
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
ERROR : FLASH FDL NOT started!

Error : Fail to boot FDL!
Unsupported device with selected fdl! Change settings!

Reconnect Power/Cable!

Operation : Identify [ v2.04 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731C_eMMC_1GB_NS
Sending Init Boot ... 
ERROR : FDL Start Failed!

Error : Fail to boot FDL!
Unsupported device with selected fdl! Change settings!

Reconnect Power/Cable!

Operation : Identify [ v2.04 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : Control transfered!

Boot Done!


UserData : STATE : DAMAGED


Done!
Elapsed: 00:00:57

Operation : Flash Firmware [ v2.04 ]

Setting   : Update NVRAM : False
Setting   : Force NVRAM : False
Setting   : Update PMT   : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x24
PMTMng : Update failed!
ERROR  : 00000084:84000000FF7B7E00
SYS : OPERATION FAILED!


Error : Flashing failed!
Make sure device HW is ok, check battery and cable! Try hold BootKey at whole Flash Process

Reconnect Power/Cable!

Operation : Flash Firmware [ v2.04 ]

Setting   : Update NVRAM : False
Setting   : Force NVRAM : False
Setting   : Update PMT   : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x24
PMTMng : Update failed!
ERROR  : 00000084:84000000FF7B7E00
SYS : OPERATION FAILED!


Error : Flashing failed!
Make sure device HW is ok, check battery and cable! Try hold BootKey at whole Flash Process

Reconnect Power/Cable!

Open : SPD_PROG.xml
Reading package ... 
Read package finished!

Created by Infinity-Box (c) 2019
Chinese Miracle II : Spreadtrum / UniSoc Service Module
Device Info file   : _Android_info.txt

Patch Level    : P00610
Display ID     : S556M_MYG1_20190919_V1.14
Ver. CodeName  : REL
Ver. Release   : 9
Sec. Patch     : 2019-09-05
Build Time     : 1568859731
Product Model  : myG1
Product Brand  : MyPhone
Product Name   : myG1
Product Device : myG1
Product Manfct : MyPhone
Product Info   : myG1
Board Platform : sp7731e
Product Board  : sp7731e_1h10


Operation : Flash Firmware [ v2.04 ]

Setting   : Update NVRAM : False
Setting   : Force NVRAM : False
Setting   : Update PMT   : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
ERROR : FLASH FDL NOT started!

Error : Fail to boot FDL!
Unsupported device with selected fdl! Change settings!

Reconnect Power/Cable!
That seems as device not accept made by SW bootloader, in that casy you may select external, as you does.
Try with SC7731E_eMMC_1GB_SS, does it work?

About flashing error, PMT update in most cases fail if eMMC has gone in ReadOnly state.
  Reply With Quote
The Following User Says Thank You to JayDi For This Useful Post:
Old 01-19-2020, 15:28   #135 (permalink)
No Life Poster
 
JayDi's Avatar
 
Join Date: Mar 2007
Posts: 18,512
Member: 462970
Status: Offline
Thanks Meter: 20,241
Quote:
Originally Posted by mss020 View Post
please explain more about nvitems
i have a locked spd9820 alcatel 3088x
i can't get the combo buttons to get in diag mode but i can make setprop sys.usb.config diag,adb (rooted)
how do i get a backup nv as the tool doesn't work when phone is live
and where do i uploade the nv locked and unlocked version
USB cable in powered off device - SVC.
Combo keys ( mostly LEFT SOFT KEY or CALL button ) as boot key for keypad phones do the work.
  Reply With Quote
The Following User Says Thank You to JayDi For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 03:50.



Powered by Searchlight © 2022 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2022 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.25772 seconds with 7 queries

SEO by vBSEO