GSMSERVER GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 04-30-2020, 12:20   #1 (permalink)
Product Supporter
 
Join Date: Jun 2009
Posts: 28,801
Member: 1043909
Status: Online
Thanks Meter: 54,017
Infinity Chinese Miracle-2 SPD/UniSOC v2.05 - NAND, KaiOs and new features


Infinity Chinese Miracle-2 SPD/UniSOC v2.05 - NAND, KaiOs and new features

As ordinary, unique functions and methods released

Core
NewChip : SC7731E with NAND ( KaiOS and MocorDroid5 )
NewChip : SC7715x with NAND ( KaiOS , MocorDroid5 , Android 4x)
NewChip : SC9820x with NAND ( MocorDroid5 , Android 4x)
Protocol : Speed increased for most operations ( SPD and UniSOC )
Protocol : Protocol changes according SPD/UniSOC R23 line

New Feature : NAND support ( SPD and UniSOC generation )
!* Support flashing Factory / InfinityFW
!* Support correct flash selection and servicing phones with NAND
!* Support InfinityFW reading ( Complete, Factory-Like )
!* Support Service operations

Service
Changed : Repair security procedure updated (Flash and Diag mode)
Changed : Identify procedure updated
!* Support complete and fast NAND devices identification
!* Support complete simlock info structure identify and verify
!* Support multi-nv structure detection and security info detection
!* Database update / self-learning updated
!* FileSystem identification support UBIFS and F2FS detection
Changed : Format FS / Reset FRP procedure updated

Firmware Reader
New Feature : NAND support
!* Support old and new generations ( SPD and UniSOC )
!* Support plain Android , KaiOs and MocorDroid5 OS
!* Automatic and correct FileSystem creation for NAND devices
!* Support all security types, include UniSoc secure/signed
!* Produced FW is 100% like factory one
Changed : FileSystem creation engine updated ( UBIFS support , bugfixes )
Changed : Improved structure identification
Changed : Support more different types
Changed : Old SPD line support rebuild ( SC7715,SC7731,SC983x,SC9820x )
Changed : Fixed FW creation in full manual / skip verify mode settings

Flasher
New Feature : Complete flash erase ( whole flash format ) during flashing ( eMMC / NAND )
New Feature : Correct NAND flashing support ( SPD and UniSOC ) ( Factory PAC and InfinityFW )
Changed : Flashing core for InfinityFW more stable

Loader Database
NewChip : SC7715 BASE NAND revisions included
NewChip : SC9820 BASE NAND revisions included
NewChip : SC7731E BASE NAND revisions included
NewChip : SC7731E BASE eMMC LOW_MEM revisions included ( cheap A8-A9 devices )
NewChip : SC7731x BASE eMMC LOW_MEM revisions included ( old A4-A5 GEA devices )

Other
Changed : Manual mode : automatic structure and setting detection in manual mode
Changed : Automatic base settings selection for BASE loaders ( Protocol, Charging, FlashSettings )
Changed : Separate NAND mode option activated in platform settings for manual mode
BugFix : Lot of minor changes and bugfixes
Changed : Software compatibility with other applications improved


Download link #1

Download link #2

Download link #3



Information about Infinity products support period renew due to situation with COVID-19




- How to upload files to support

Infinity-Box 15 years (since year 2005) updates and support as nobody else !
  Reply With Quote
The Following 51 Users Say Thank You to YellowBoss For This Useful Post:
Show/Hide list of the thanked
Old 04-30-2020, 12:26   #2 (permalink)
No Life Poster
 
Join Date: Aug 2006
Location: CAPE TOWN
Posts: 6,207
Member: 328688
Status: Online
Thanks Meter: 1,671
Donate money to this user
File password pleaz 123456789 not working
  Reply With Quote
Old 04-30-2020, 12:39   #3 (permalink)
Freak Poster
 
Join Date: Mar 2019
Location: Gsm-Boss
Age: 42
Posts: 469
Member: 2902804
Status: Offline
Sonork: 100.1660513
Thanks Meter: 400
nice update

Loader Database
NewChip : SC7715 BASE NAND revisions included
NewChip : SC9820 BASE NAND revisions included
NewChip : SC7731E BASE NAND revisions included
NewChip : SC7731E BASE eMMC LOW_MEM revisions included ( cheap A8-A9 devices )
NewChip : SC7731x BASE eMMC LOW_MEM revisions included ( old A4-A5 GEA devices )
  Reply With Quote
The Following 5 Users Say Thank You to Gsm-Boss. For This Useful Post:
Show/Hide list of the thanked
Old 04-30-2020, 13:03   #4 (permalink)
Freak Poster
 
Join Date: Mar 2016
Posts: 418
Member: 2552533
Status: Offline
Thanks Meter: 86
Boom Boom update thnx team
  Reply With Quote
Old 04-30-2020, 13:12   #5 (permalink)
Junior Member
 
Join Date: Jun 2011
Posts: 11
Member: 1594841
Status: Offline
Thanks Meter: 1
Quote:
Originally Posted by CHAUDHRAY ARSHAD View Post
File password pleaz 123456789 not working
password 12345678
  Reply With Quote
The Following User Says Thank You to Ulugbek84 For This Useful Post:
Old 04-30-2020, 13:27   #6 (permalink)
No Life Poster
 
Join Date: Jul 2016
Posts: 577
Member: 2603633
Status: Offline
Sonork: family
Thanks Meter: 120
Great team great update..
Best spd in the world..
  Reply With Quote
Old 04-30-2020, 13:40   #7 (permalink)
Freak Poster
 
busywonder's Avatar
 
Join Date: Mar 2009
Location: South Africa
Posts: 410
Member: 985857
Status: Offline
Sonork: 100.1677137
Thanks Meter: 190
Donate money to this user
Quote:
Originally Posted by CHAUDHRAY ARSHAD View Post
File password pleaz 123456789 not working
Password is 12345678
  Reply With Quote
Old 04-30-2020, 13:48   #8 (permalink)
Insane Poster
 
Join Date: Feb 2016
Location: Tashkent
Posts: 62
Member: 2532428
Status: Offline
Sonork: https://t.me/BotirJon
Thanks Meter: 28
When to upgrade quallcom?
  Reply With Quote
The Following 3 Users Say Thank You to BootYa For This Useful Post:
Show/Hide list of the thanked
Old 04-30-2020, 13:49   #9 (permalink)
No Life Poster
 
JayDi's Avatar
 
Join Date: Mar 2007
Posts: 16,690
Member: 462970
Status: Offline
Thanks Meter: 16,917
MocorDroid5 on SC7715 with NAND test :
Code:
Operation : Identify [ v2.05 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7715x_BASE : SC7715G_NAND_256MB_NS
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : Control transfered!

Boot Done!

Device info : 
Patch Level    : MocorDroid
Display ID     : BQ_F9281B_2800G_V02_20191205
Ver. Incmt     : FS330_QVGA_V100_20191205_141535
Ver. CodeName  : REL
Ver. Release   : 4.4.2
Build Time     : 1575526568
Product Model  : BQ-2800G
Product Brand  : BQ-2800G
Product Name   : scx15_sp7715ga_FS330_project
Product Device : scx15_sp7715ga_FS330
Product Board  : scx15_sp7715ga_FS330
Product Manfct : BQ-2800G
Board Platform : scx15
Product Info   : scx15_sp7715ga_FS330

FlashInfo : 256k / 4k

NVMng  : SecurityInfo 
IMEI[1] : 3xxxxxxxxxxxxxx3
IMEI[2] : 3xxxxxxxxxxxxxx3
IMEI[3] : 3xxxxxxxxxxxxxx3
WIFIMAC : FFFFFFFFFFFF
BT_MAC  : FFFFFFFFFFFF
SEC : SLS:1, SKS:0, SKV:0

Platform Version: MOCORTM_W17.46.5_P2_Debug
Project Version:   sc7715_modem
BASE  Version:    TM_BASE_W17.46.5_P2
MMI Version:       sc7715_modem
HW Version:        sc7715_sc7715_modem
CMP_Time : 12-13-2018 16:13:00

MODEM TAG : MOCORTM_W17.46.5_P2_Debug_TM_BASE_W17.46.5_P2_sc7715_sc7715_modem_sc7715_modem_sc7715_modem

UserData : STATE : PLAIN [UBIFS]


Done!
Elapsed: 00:01:32
Code:
Operation : Read FW [ v2.05 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7715x_BASE : SC7715G_NAND_256MB_NS
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : Control transfered!

Boot Done!

Device info : 
Patch Level    : MocorDroid
Display ID     : BQ_F9281B_2800G_V02_20191205
Ver. Incmt     : FS330_QVGA_V100_20191205_141535
Ver. CodeName  : REL
Ver. Release   : 4.4.2
Build Time     : 1575526568
Product Model  : BQ-2800G
Product Brand  : BQ-2800G
Product Name   : scx15_sp7715ga_FS330_project
Product Device : scx15_sp7715ga_FS330
Product Board  : scx15_sp7715ga_FS330
Product Manfct : BQ-2800G
Board Platform : scx15
Product Info   : scx15_sp7715ga_FS330

AndroidVer : 4
VlnrLevel : 0x01
FlashInfo : 256k / 4k

SCX15__BQ-2800G__BQ-2800G__4.4.2__BQ_F9281B_2800G_V02_20191205__MocorDroid__scx15_sp7715ga_FS330

Read : prodnv.img
Read : phase.cfg
Read : wnvitem.bin
Read : wcnnvitem.bin
Read : wmodem.bin
Read : wdsp.bin
Read : modem_wcn.img
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Read : boot.img
Read : system.img
Make : cache.img
Read : recovery.img
Make : userdata.img
Read : u-boot.bin
Read : u-boot-spl-16k.bin

Firmware size : 0x127B4F84 ( 295,71 MiB )
Android Info saved : _Android_info.txt
Reconnect Power/Cable!


Done!
Elapsed: 00:05:09
Code:
Open : SPD_PROG.xml
Reading package ... 
Read package finished!

Created by Infinity-Box (c) 2020
Chinese Miracle II : Spreadtrum / UniSoc Service Module
Device Info file   : _Android_info.txt

Patch Level    : MocorDroid
Display ID     : BQ_F9281B_2800G_V02_20191205
Ver. Incmt     : FS330_QVGA_V100_20191205_141535
Ver. CodeName  : REL
Ver. Release   : 4.4.2
Build Time     : 1575526568
Product Model  : BQ-2800G
Product Brand  : BQ-2800G
Product Name   : scx15_sp7715ga_FS330_project
Product Device : scx15_sp7715ga_FS330
Product Board  : scx15_sp7715ga_FS330
Product Manfct : BQ-2800G
Board Platform : scx15
Product Info   : scx15_sp7715ga_FS330


Operation : Flash Firmware [ v2.05 ]

Setting   : Update NVRAM : True
Setting   : Force NVRAM : False
Setting   : Update PMT   : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot ... 
Boot sent!
Kick FDL ... 
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ... 
Port speed : 921600
Sending Flash Boot ... 
Boot sent!
Kick FLASH FDL ... 
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x15
PMTMng : Update PMT Ok!

NVRM  : wnvitem.bin
NVMng  : Load 0x30
NVMng  : Init SRC
NVMng  : SecurityInfo 
IMEI[1] : 3xxxxxxxxxxxxxx3
IMEI[2] : 3xxxxxxxxxxxxxx3
IMEI[3] : 3xxxxxxxxxxxxxx3
WIFIMAC : FFFFFFFFFFFF
BT_MAC  : FFFFFFFFFFFF
SEC : SLS:1, SKS:0, SKV:0

NVMng  : Backup Ok , 0x000283BC
NVMng  : Init DST
NVMng  : Rx0D : Wx0C
NVMng  : NVM block updated!

NVRM  : wcnnvitem.bin
NVMng  : Load 0x30
NVMng  : Init SRC
NVMng  : SecurityInfo 
IMEI[1] : 3xxxxxxxxxxxxxx3
IMEI[2] : 3xxxxxxxxxxxxxx3
IMEI[3] : 3xxxxxxxxxxxxxx3
WIFIMAC : FFFFFFFFFFFF
BT_MAC  : FFFFFFFFFFFF
SEC : SLS:1, SKS:0, SKV:0

NVMng  : Backup Ok , 0x00009BC8
NVMng  : Init DST
NVMng  : Rx09 : Wx08
NVMng  : NVM block updated!

FSIMG  : prodnv.img
CODE  : wmodem.bin
CODE  : wdsp.bin
CODE  : modem_wcn.img
CODE  : boot_logo.bmp
CODE  : fastboot_logo.bmp
CODE  : boot.img
FSIMG  : system.img
FSIMG  : cache.img
CODE  : recovery.img
FSIMG  : userdata.img
UBOOT  : u-boot.bin
UBOOT  : u-boot-spl-16k.bin
ERASE : WFLASH
ERASE : WCNFLASH
ERASE : MISC
Flashing finished!
Reconnect Power/Cable!


Done!
Elapsed: 00:02:05
  Reply With Quote
The Following 19 Users Say Thank You to JayDi For This Useful Post:
Show/Hide list of the thanked
Old 04-30-2020, 13:51   #10 (permalink)
Product Supporter
 
Join Date: Jun 2009
Posts: 28,801
Member: 1043909
Status: Online
Thanks Meter: 54,017
Quote:
Originally Posted by CHAUDHRAY ARSHAD View Post
File password pleaz 123456789 not working
Yes, you are right !
"123456789 not working" because password is 12345678
  Reply With Quote
The Following User Says Thank You to YellowBoss For This Useful Post:
Old 04-30-2020, 13:54   #11 (permalink)
Product Supporter
 
Join Date: Jun 2009
Posts: 28,801
Member: 1043909
Status: Online
Thanks Meter: 54,017
Quote:
Originally Posted by BootYa View Post
When to upgrade quallcom?
Friend !

this thread is about SPD/UniSoc. Please in future check thread name before ask questions.
Anyway let me inform you that work about other updates and improvements is in progress, you will see an announce when it will be finished
  Reply With Quote
The Following 4 Users Say Thank You to YellowBoss For This Useful Post:
Show/Hide list of the thanked
Old 04-30-2020, 14:34   #12 (permalink)
No Life Poster
 
Join Date: Nov 2016
Posts: 889
Member: 2643730
Status: Online
Thanks Meter: 589
I am always excited when infinity product update come , always exciting update , one of the best team in gsm market.
  Reply With Quote
Old 04-30-2020, 14:51   #13 (permalink)
Freak Poster
 
Join Date: Jan 2014
Location: CUBA
Age: 29
Posts: 442
Member: 2108610
Status: Offline
Thanks Meter: 346
Good Update Team, keep it Up!
  Reply With Quote
Old 04-30-2020, 15:10   #14 (permalink)
Crazy Poster
 
Join Date: Sep 2019
Location: Mozambique
Posts: 56
Member: 2927861
Status: Offline
Thanks Meter: 6
Can we unlock ZTE blande L130 nos??
  Reply With Quote
The Following User Says Thank You to Khadaff_papillo For This Useful Post:
Old 04-30-2020, 15:50   #15 (permalink)
Product Supporter
 
Join Date: Jun 2009
Posts: 28,801
Member: 1043909
Status: Online
Thanks Meter: 54,017
Quote:
Originally Posted by Khadaff_papillo View Post
Can we unlock ZTE blande L130 nos??
Hi,
It's hard to say anything without phone.
You can try to connect phone and see results.
  Reply With Quote
The Following User Says Thank You to YellowBoss For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 12:06.



Powered by Searchlight © 2020 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.39111 seconds with 8 queries

SEO by vBSEO