Infinity #CM2MT2 v2.44 Infinix/Tecno no need TP and more features

[YellowBoss]

Infinity #CM2MT2 v2.44 Infinix/Tecno no need TP and more features

General:
- Device info detection revised
- EMI processing for legacy hardware (f.e. MT6580) revised
- EMI database rebuilded
- Meizu operations revised
- New feature: Brom ON/OFF - allow enable BROM mode and allow do extended services such as:
All FireFly Features: Boot unlock, testing, service etc.
All FireFly DA features: Boot unlock, RPMB, service and other
NOTE: Read BROM On|Off manual
- Display partition/image size during flash Read/Write
- Device information parser updated
- DA selection mode revised
- DA information/hints displayed on selection for number of loaders
- DA config database updated
- Red|Orange state methods revised
- Incompatible image confirmation during Flash fixed
- Simlock methods output updated
- Format methods output updated
- Infinix and Tecno without testpoint/disassembly included MT6739, MT6761, MT6763, MT6765, MT6768, MT6781, MT6785, MT6833, MT6877, MT6893
- Internal changes - memory management and more

MemoryTool:
- Bulk Read/Write operations updated: selection and Read/Write path sync
- Read/Write file path handling method on file select/cancel revised
- Messages & errors|hints updated

Backup:
- Backup restore process updated with any record On|Off selection
- Select All/None items by right mouse click

User Interface:
- Startup window position config revised
- Software messages & hints updated

Dongle firmware version required: 0155


Download link #1
Download link #2
Download link #3



Infinity Telegram Channel
Infinity Telegram Chat English
Infinity Telegram Chat Русский, Українська, Белару́ская #1
Infinity Telegram Chat Русский, Українська, Белару́ская #2
Infinity Telegram Flash File search
Infinity Video Manuals
Infinity Facebook Page
Infinity Facebook Group
Infinity Twitter

[.:asmat:.]

Good updae. any news about xiaomi 5g imei/baseband repair?

[YellowBoss]

Originally Posted by .:asmat:.

Good updae. any news about xiaomi 5g imei/baseband repair?

https://infinity-box.com/?r=100199

[.:asmat:.]

its xiaomi 11t (Dimensity 1200) with unknown basband caused by overwritten NVRAM from another phone.

[alimobile279]

good update
NOTE: Read BROM On|Off manual
- Display partition/image size during flash Read/Write
- Device information parser updated
- DA selection mode revised
- DA information/hints displayed on selection for number of loaders
- DA config database updated
- Red|Orange state methods revised
- Incompatible image confirmation during Flash fixed
- Simlock methods output updated
- Format methods output updated
- Infinix and Tecno without testpoint/disassembly included MT6739, MT6761, MT6763, MT6765, MT6768, MT6781, MT6785, MT6833, MT6877, MT6893
- Internal changes - memory management and more

[rockstar00739]

Great Update Team infinity
kindly do Something For Vivo Latest Security...

[Jacobkamudyariw]

GREAT TOOL INFINITY BOX

: Infinix/Tecno no need TP

[Mcctechnologies]

FIRST JOB USING THIS WONDERFUL UPDATE WAS DONE SUCCESSFULLY



DA selected: TECNO | 2023-05 | MTK_AllInOne_DA.bin
Preloader Mode without testpoint/disassembly
MT6739, MT6761, MT6763, MT6765, MT6768, MT6781, MT6785, MT6833, MT6877, MT6893

Operation: Identify Device [ v2.44 ]
Platform: MTK SmartPhone - MT65/67/68/69/81/83/87 | Helio G/P/X
Mode: FLASH
Port: Both [ B + P ]
[+] Read Deep info: PRL, HW, DEBUG
[+] Auto-EMI
[+] FireFly UNI-Proto
[+] Vendor-Specific Analyzer
[-] Local SLA
[-] Force BROM
Wait...

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek PreLoader USB VCOM (Android) (COM168)
MODE [0]: PRELOADER PORT; PORT: 168
Waiting BOOT ACK...
PRELOADER: ACK Ok
BROM: Init...
Init passed
CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
CODE: Cervino
TYPE: MODERN [RAPHAEL]
BROM: Sec Level: 0x00000005 Mode: SBC+SDA
VER: 0xFF BL: 0x03 [PRELOADER PORT]
AGENT: AUTO: TECNO: 2023-05
[caf6df7e] C:\InfinityBox\CM2MT2\boot\INFINIX\2023-05\MTK_AllInOne_DA.bin
Looking for suitable BootChain in DA...
Found MT6765
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
DA sent
Transfer control to DA...
DA: AGENT started
DA: SYNC
MODE: PRELOADER
EXT_RAM initialized
DA: Boot to 2nd DA...
2nd stage confirmed
DA: SYNC passed

Load HW info...
SRAM: 0x0003A000 [ 232.00 Kb ]
DRAM: 0xC0000000 [ 3.00 Gb ]

EMMC CID: 150100445036384D420260BB903B58CB
VEN: Samsung OEM: 256 ID: 445036384D42 [DP68MB] PRV: 0x02
SNN: 1622904891 [0x60BB903B]
MM/YY: 5/2021
BOOT1: 0x00400000 [ 4.00 Mb ]
BOOT2: 0x00400000 [ 4.00 Mb ]
RPMB: 0x01000000 [ 16.00 Mb ]
USER: 0xE8F800000 [ 58.24 Gb ]

CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
CODE: Cervino
TYPE: MODERN [RAPHAEL]
RNID: F3160C0AB3EB837DF250E9546F0294B0

USB: HIGH-SPEED
Boot done [Raphael]

Analyze PMT...
Loaded 0x8000 bytes
PMT: PGPT [0x64] Records: 50
Get slot info...
Select info source... Ok
SW: TECNO/KF6i-OP/TECNO-KF6i:11/RP1A.200720.011/230111V196:user/release-keys
Product Brand: TECNO
Product Device: TECNO-KF6i
Product Model: TECNO KF6i
Product Name: KF6i-OP
Patch Level: RP1A.200720.011
Display ID: KF6i-H6218EFK-R-OP-230111V196
SW Version: 230111V196
Ver. CodeName: REL
Ver. Release: 11
Sec. Patch: 2023-01-05
Build Time: 11/01/2023 10:14:00
CPU: arm64-v8a,armeabi-v7a,armeabi
CPU: armeabi-v7a,armeabi
CPU: arm64-v8a
Product Info: kf6j_h6218
SW: vnd_kf6j_h6218-user 11 RP1A.200720.011 217771 release-keys
Product Board: TECNO-KF6i
Board Platform: mt6765
Product Manfct: TECNO MOBILE LIMITED

Strategy: [none|generic]
Firmware ID: MT6765_TECNO_MOBILE_LIMITED_TECNO_KF6i_OSv11_KF6i-H6218EFK-R-OP-230111V196_RP1A.200720.011_kf6j_h6218
Verify firmware [MT6765_TECNO_MOBILE_LIMITED_TECNO_KF6i_OSv11_KF6i-H6218EFK-R-OP-230111V196_RP1A.200720.011_kf6j_h6218]...
Firmware is unknown
Please upload file https://infinity-box.com/?r=100020

Analyze userdata...
userData: fileSystem : [f2fs] with FBE [file based encryption]

Analyze modem... Nothing
Analyze nvram...
NVRAM: Items: 0xA3 Size: 0x101BCE State: Ok
WiFi MAC: AA0036004400
BlTh MAC: 2C4DDE6B1C10
IMEI[1]: 355700000000000
IMEI[2]: 355000000000000
Verify device config...
Ok
Loaders Ok
Backup to C:\InfinityBox\CM2MT2\backup\MT6765__F3160C0AB3EB8 37DF250E9546F0294B0\
Items to check: 20
Read [16] NVRAM
Read [8] NVDATA
Read [3] PROINFO
Read [7] NVCFG
Read [11] PROTECT1
Read [1] PGPT
Read [14] PERSIST
Read [0] PRELOADER
Done 8 files
Compress: C:\InfinityBox\CM2MT2\backup\MT6765__F3160C0AB3EB8 37DF250E9546F0294B0\
Cleanup...
Ok
Verify C:\InfinityBox\CM2MT2\backup\MT6765__F3160C0AB3EB8 37DF250E9546F0294B0.7z
Finished

STORAGE : Life Status : eMMC : OK!
STORAGE : OTP Status : UNLOCKED!
STORAGE : RPMB Status : eMMC : RPMB KEY NOT PROGRAMMED [USABLE]

Analyze preloader...
EMI: MT6765 preloader_kf6j_h6218.bin with 6 memory type(s)
1. eMMC LP_DDR4X ID: 90014A68433861503E Ven: Hynix | Dev: hC8aP> RAM: 3.00 Gb
2. eMMC LP_DDR4X ID: 150100445036384D42 Ven: Samsung | Dev: DP68MB RAM: 3.00 Gb
3. eMMC LP_DDR4X ID: 150100445636444142 Ven: Samsung | Dev: DV6DAB RAM: 4.00 Gb
4. eMMC LP_DDR4X ID: 150100445036444142 Ven: Samsung | Dev: DP6DAB RAM: 4.00 Gb
5. eMMC LP_DDR4X ID: 150100445636444242 Ven: Samsung | Dev: DV6DBB RAM: 4.00 Gb
6. eMMC LP_DDR4X ID: 150100445036444242 Ven: Samsung | Dev: DP6DBB RAM: 4.00 Gb
Preloader saved: C:\InfinityBox\CM2MT2\backup\preloader\preloader_k f6j_h6218.bin
Verify C:\InfinityBox\CM2MT2\backup\preloader\preloader_k f6j_h6218.bin [145f7bc4]...
Exist
Done: 00:02:21
Reconnect Power/Cable now

WARNING:
Operation will DISABLE Normal boot by damaging PRELOADER!
If device already enabled by this operation - it will revert device state back!
Continue? Yes

Operation: BROM Enable/Disable [ v2.44 ]
Platform: MTK SmartPhone - MT65/67/68/69/81/83/87 | Helio G/P/X
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek PreLoader USB VCOM (Android) (COM168)
MODE [0]: PRELOADER PORT; PORT: 168
Waiting BOOT ACK...
PRELOADER: ACK Ok
BROM: Init...
Init passed
CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
CODE: Cervino
TYPE: MODERN [RAPHAEL]
BROM: Sec Level: 0x00000005 Mode: SBC+SDA
VER: 0xFF BL: 0x03 [PRELOADER PORT]
AGENT: AUTO: TECNO: 2023-05
[caf6df7e] C:\InfinityBox\CM2MT2\boot\INFINIX\2023-05\MTK_AllInOne_DA.bin
Looking for suitable BootChain in DA...
Found MT6765
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
DA sent
Transfer control to DA...
DA: AGENT started
DA: SYNC
MODE: PRELOADER
EXT_RAM initialized
DA: Boot to 2nd DA...
2nd stage confirmed
DA: SYNC passed

Load HW info...
SRAM: 0x0003A000 [ 232.00 Kb ]
DRAM: 0xC0000000 [ 3.00 Gb ]

EMMC CID: 150100445036384D420260BB903B58CB
VEN: Samsung OEM: 256 ID: 445036384D42 [DP68MB] PRV: 0x02
SNN: 1622904891 [0x60BB903B]
MM/YY: 5/2021
BOOT1: 0x00400000 [ 4.00 Mb ]
BOOT2: 0x00400000 [ 4.00 Mb ]
RPMB: 0x01000000 [ 16.00 Mb ]
USER: 0xE8F800000 [ 58.24 Gb ]

CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
CODE: Cervino
TYPE: MODERN [RAPHAEL]
RNID: F3160C0AB3EB837DF250E9546F0294B0

USB: HIGH-SPEED
Boot done [Raphael]

Reading... Ok
Disabling preloader...
Boot config updated with C:\InfinityBox\CM2MT2\backup\preloader\preloader.b in
State change : Ok!
Done: 00:01:33
Reconnect Power/Cable now

Reset Mode: Reset FRP only

Operation: Reset Settings/Format FS [ v2.44 ]
Platform: MTK SmartPhone - MT65/67/68/69/81/83/87 | Helio G/P/X
Format: FRP [ RESET PROTECTION ]
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek PreLoader USB VCOM (Android) (COM168)
MODE [0]: PRELOADER PORT; PORT: 168
Waiting BOOT ACK...
PRELOADER: ACK Ok
BROM: Init...
Init passed
CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
CODE: Cervino
TYPE: MODERN [RAPHAEL]
BROM: Sec Level: 0x00000005 Mode: SBC+SDA
VER: 0xFF BL: 0x03 [PRELOADER PORT]
AGENT: AUTO: TECNO: 2023-05
[caf6df7e] C:\InfinityBox\CM2MT2\boot\INFINIX\2023-05\MTK_AllInOne_DA.bin
[145f7bc4] C:\InfinityBox\CM2MT2\backup\preloader\preloader.b in
Looking for suitable BootChain in DA...
Found MT6765
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
DA sent
Transfer control to DA...
DA: AGENT started
DA: SYNC
MODE: PRELOADER
EXT_RAM initialized
DA: Boot to 2nd DA...
2nd stage confirmed
DA: SYNC passed

Load HW info...
SRAM: 0x0003A000 [ 232.00 Kb ]
DRAM: 0xC0000000 [ 3.00 Gb ]

EMMC CID: 150100445036384D420260BB903B58CB
VEN: Samsung OEM: 256 ID: 445036384D42 [DP68MB] PRV: 0x02
SNN: 1622904891 [0x60BB903B]
MM/YY: 5/2021
BOOT1: 0x00400000 [ 4.00 Mb ]
BOOT2: 0x00400000 [ 4.00 Mb ]
RPMB: 0x01000000 [ 16.00 Mb ]
USER: 0xE8F800000 [ 58.24 Gb ]

CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
CODE: Cervino
TYPE: MODERN [RAPHAEL]
RNID: F3160C0AB3EB837DF250E9546F0294B0

USB: HIGH-SPEED
Boot done [Raphael]

Analyze PMT...
Loaded 0x8000 bytes
PMT: PGPT [0x64] Records: 50
Select info source... Ok
SW: TECNO/KF6i-OP/TECNO-KF6i:11/RP1A.200720.011/230111V196:user/release-keys
Product Brand: TECNO
Product Device: TECNO-KF6i
Product Model: TECNO KF6i
Product Name: KF6i-OP
Patch Level: RP1A.200720.011
Display ID: KF6i-H6218EFK-R-OP-230111V196
SW Version: 230111V196
Ver. CodeName: REL
Ver. Release: 11
Sec. Patch: 2023-01-05
Build Time: 11/01/2023 10:14:00
CPU: arm64-v8a,armeabi-v7a,armeabi
CPU: armeabi-v7a,armeabi
CPU: arm64-v8a
Product Info: kf6j_h6218
SW: vnd_kf6j_h6218-user 11 RP1A.200720.011 217771 release-keys
Product Board: TECNO-KF6i
Board Platform: mt6765
Product Manfct: TECNO MOBILE LIMITED
Strategy: [none|generic]
Verify device config...
Ok
Loaders Ok
Backup exist: C:\InfinityBox\CM2MT2\backup\MT6765__F3160C0AB3EB8 37DF250E9546F0294B0
Stage a: FRP [ RESET PROTECTION ]
[1] Process RESET PROTECTION... Ok
[2] Verified
Stage b: FRP [ RESET PROTECTION ]
[1] Verified
[2] Verified
Stage d: FRP [ RESET PROTECTION ]
Done: 00:00:21
Reconnect Power/Cable now

WARNING:
Operation will DISABLE Normal boot by damaging PRELOADER!
If device already enabled by this operation - it will revert device state back!
Continue? Yes

Operation: BROM Enable/Disable [ v2.44 ]
Platform: MTK SmartPhone - MT65/67/68/69/81/83/87 | Helio G/P/X
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek PreLoader USB VCOM (Android) (COM168)
MODE [0]: PRELOADER PORT; PORT: 168
Waiting BOOT ACK...
PRELOADER: ACK Ok
BROM: Init...
Init passed
CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
CODE: Cervino
TYPE: MODERN [RAPHAEL]
BROM: Sec Level: 0x00000005 Mode: SBC+SDA
VER: 0xFF BL: 0x03 [PRELOADER PORT]
AGENT: AUTO: TECNO: 2023-05
[caf6df7e] C:\InfinityBox\CM2MT2\boot\INFINIX\2023-05\MTK_AllInOne_DA.bin
[145f7bc4] C:\InfinityBox\CM2MT2\backup\preloader\preloader.b in
Looking for suitable BootChain in DA...
Found MT6765
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
DA sent
Transfer control to DA...
DA: AGENT started
DA: SYNC
MODE: PRELOADER
EXT_RAM initialized
DA: Boot to 2nd DA...
2nd stage confirmed
DA: SYNC passed

Load HW info...
SRAM: 0x0003A000 [ 232.00 Kb ]
DRAM: 0xC0000000 [ 3.00 Gb ]

EMMC CID: 150100445036384D420260BB903B58CB
VEN: Samsung OEM: 256 ID: 445036384D42 [DP68MB] PRV: 0x02
SNN: 1622904891 [0x60BB903B]
MM/YY: 5/2021
BOOT1: 0x00400000 [ 4.00 Mb ]
BOOT2: 0x00400000 [ 4.00 Mb ]
RPMB: 0x01000000 [ 16.00 Mb ]
USER: 0xE8F800000 [ 58.24 Gb ]

CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
CODE: Cervino
TYPE: MODERN [RAPHAEL]
RNID: F3160C0AB3EB837DF250E9546F0294B0

USB: HIGH-SPEED
Boot done [Raphael]

Reading... Ok
Enabling preloader...
Bootloader code area 0 updated
Bootloader code area 1 updated
State change : Ok!
Done: 00:00:53
Reconnect Power/Cable now

[azukaikelia]

Can it erase and flash?

[SAJONDUTTA]

https://dc696.4shared.com/img/UNtG5d...44118695009719sir my pc monitor medium 125% use but new 2.44 not show full soft image

[reedson]

Originally Posted by SAJONDUTTA

https://dc696.4shared.com/img/UNtG5d...44118695009719sir my pc monitor medium 125% use but new 2.44 not show full soft image

Can adjust your resolution to 100% to see if you got it fixed

[ribbentrop]

Originally Posted by SAJONDUTTA

https://dc696.4shared.com/img/UNtG5d...44118695009719sir my pc monitor medium 125% use but new 2.44 not show full soft image

Yeah ... The same story with my laptop. It started from 2.43 version

Originally Posted by reedson

Can adjust your resolution to 100% to see if you got it fixed

It will not help. Something has been changed in exe from 2.43 version

[SAJONDUTTA]

Originally Posted by reedson

Can adjust your resolution to 100% to see if you got it fixed

i know but 125% is perfect for me butcm2 1.40 is ok

[YellowBoss]

Originally Posted by SAJONDUTTA

i know but 125% is perfect for me butcm2 1.40 is ok

try 2.45a3 (you know where to get). result?

[YellowBoss]

Originally Posted by SAJONDUTTA

https://dc696.4shared.com/img/UNtG5d...44118695009719sir my pc monitor medium 125% use but new 2.44 not show full soft image

try to click to [View] button at bottom right. Any changes?