Infinix x680 dead after flashing wrong file by cm2 mt2 v2.12 ..please help to revive! - GSM-Forum

safina gsm · 07-11-2020, 14:03

PHONE CAME FROM ANOTHER TECHNICIAN WHO FLASHED WRONG FIRMWARE TO THE PHONE....

I WAS ABLE TO GET OPERATION LOG FROM HIS COMPUTER...

AND I'VE FOUND LOG BELOW:

Code:

Card found : 3716BCA6 , v0144
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.12

Load IDBase v518137 Ok!


Operation : Identify [ v2.12 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM14)
MODE : PRELOADER PORT
PORT : 14
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000005
BROM : SecMode  : SBC+SDA
BROM : BROM|BL  : 0xFF|0x03
BROM : PRELOADER PORT
MODE : INFINIX : SEC_NEW | Manual : Disabled
BROM : SOCID : 1B638CCC3482FD467B96B7A3AF5F99EEB17B5D506CE8BAB047D2AF901ACE8ADF
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00080000 [ 512.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: 150100514436334D42011EC86A3EC661
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : QD63MB
        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : C60B52A0495BBB685B9D1D42F97B3746

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : QP1A.190711.020
Display ID     : X680-H6116DE-QGo-OP-200702V331
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2020-06-05
Build Time     : 1593625160
Product Info   : x680_h6116
Product Board  : Infinix-X680
Board Platform : mt6761

USERDATA : FILESYSTEM : F2FS  with FBE ( File-Base Encryption )


STORAGE : LifeStatus : Verify NOT supported by DA/HW!

Done!
Elapsed: 00:00:17

AND WHEN HE FLASHED THE CORRECT FIRMWARE HE GOT THIS:

Code:

Preloader [HW DEV] Info : 
 EMI : DEV : MT6761
 EMI : SRC : preloader_x680_h6116.bin
 EMI : CNT : 0008
 EMI : [00] : eMMC : DDR3 : ID : 90014A68423861503E : VEN : HYNIX     | DEV : hB8aP> : RAM : [ 3.00 GB ]
 EMI : [01] : eMMC : DDR3 : ID : 90014A484247346132 : VEN : HYNIX     | DEV : HBG4a2 : RAM : [ 3.00 GB ]
 EMI : [02] : eMMC : DDR3 : ID : 90014A68423861503E : VEN : HYNIX     | DEV : hB8aP> : RAM : [ 2.00 GB ]
 EMI : [03] : eMMC : DDR3 : ID : 150100514436334D42 : VEN : SAMSUNG   | DEV : QD63MB : RAM : [ 2.00 GB ]
 EMI : [04] : eMMC : DDR3 : ID : 150100475836424142 : VEN : SAMSUNG   | DEV : GX6BAB : RAM : [ 3.00 GB ]
 EMI : [05] : eMMC : DDR3 : ID : 150100515836334142 : VEN : SAMSUNG   | DEV : QX63AB : RAM : [ 2.00 GB ]
 EMI : [06] : eMMC : DDR3 : ID : 90014A484347386134 : VEN : HYNIX     | DEV : HCG8a4 : RAM : [ 4.00 GB ]
 EMI : [07] : eMMC : DDR3 : ID : 700100474D424D4541 : VEN : KINGSTON  | DEV : GMBMEA : RAM : [ 2.00 GB ]

Operation : Write Flash [ v2.12 ]

Repartition   : Enabled
Flash Verify  : Disabled
Reg.Pre-Erase : Enabled
Verify HW/SW  : Enabled
SData Backup  : Disabled
Safe UserData : Disabled
Flash Format  : Disabled

Files :23
[FL] : Set : preloader_x680_h6116.bin
[FL] : Set : tkv.img
[FL] : Set : recovery.img
[FL] : Set : md1img-verified.img
[FL] : Set : spmfw-verified.img
[FL] : Set : scp-verified.img
[FL] : Set : scp-verified.img
[FL] : Set : sspm-verified.img
[FL] : Set : sspm-verified.img
[FL] : Set : lk-verified.img
[FL] : Set : lk-verified.img
[FL] : Set : boot.img
[FL] : Set : logo-verified.bin
[FL] : Set : dtbo-verified.img
[FL] : Set : tee-verified.img
[FL] : Set : tee-verified.img
[FL] : Set : vbmeta.img
[FL] : Set : vbmeta_system.img
[FL] : Set : vbmeta_vendor.img
[FL] : Set : super.img
[FL] : Set : cache.img
[FL] : Set : tranfs.img
[FL] : Set : userdata.img

[FL] : Total size : 0xAB41F394 [ 2.68 GB ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM14)
MODE : PRELOADER PORT
PORT : 14
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000005
BROM : SecMode  : SBC+SDA
BROM : BROM|BL  : 0xFF|0x03
BROM : PRELOADER PORT
MODE : INFINIX : SEC_NEW | Manual : Disabled
BROM : SOCID : 1B638CCC3482FD467B96B7A3AF5F99EEB17B5D506CE8BAB047D2AF901ACE8ADF
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00080000 [ 512.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: 150100514436334D42011EC86A3EC661
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : QD63MB
        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : C60B52A0495BBB685B9D1D42F97B3746

DA : USB : HIGH-SPEED

Boot done!

[FL] : HW verification passed!

SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432

[FL] : Pre-Erase 
Erase : 0x0000000000000000 : 0x0000000000108000
Erase : 0x0000000000408000 : 0x0000000004C1A000
Erase : 0x0000000007022000 : 0x00000000047DE000
Erase : 0x000000000F800000 : 0x000000000BB00000
Erase : 0x000000001F300000 : 0x00000001A1500000

[FL] : RePartition 
[FL] : RePartition Ok!


[FL] : Flashing now ... 

Write : PRELOADER
Update bootloader backup copy ... 
Update bootloader backup copy Ok!
Write : TKV
Write : RECOVERY
Write : MD1IMG
Write : SPMFW
Write : SCP1
Write : SCP2
Write : SSPM_1
Write : SSPM_2
Write : LK
Write : LK2
Write : BOOT
Write : LOGO
Write : DTBO
Write : TEE1
Write : TEE2
Write : VBMETA
Write : VBMETA_SYSTEM
ERR : 0xC002002A
ERR : SEC : IMG TYPE MISMATCH
ERR : 0x00001000|0x00001000

Error : Flashing failed!
>>> Seems as something wrong with device! Check battery charge and device state!

Reconnect Power/Cable!

AND WHEN HE FLASHED THE WRONGG FIRMWARE :

Code:

Operation : Write Flash [ v2.12 ]

Repartition   : Enabled
Flash Verify  : Enabled
Reg.Pre-Erase : Enabled
Verify HW/SW  : Enabled
SData Backup  : Disabled
Safe UserData : Disabled
Flash Format  : Disabled

Files :23
[FL] : Set : preloader_x680c_h6118.bin
[FL] : Set : tkv.img
[FL] : Set : recovery.img
[FL] : Set : md1img-verified.img
[FL] : Set : spmfw-verified.img
[FL] : Set : scp-verified.img
[FL] : Set : scp-verified.img
[FL] : Set : sspm-verified.img
[FL] : Set : sspm-verified.img
[FL] : Set : lk-verified.img
[FL] : Set : lk-verified.img
[FL] : Set : boot.img
[FL] : Set : logo-verified.bin
[FL] : Set : dtbo-verified.img
[FL] : Set : tee-verified.img
[FL] : Set : tee-verified.img
[FL] : Set : vbmeta.img
[FL] : Set : vbmeta_system.img
[FL] : Set : vbmeta_vendor.img
[FL] : Set : super.img
[FL] : Set : cache.img
[FL] : Set : tranfs.img
[FL] : Set : userdata.img

[FL] : Total size : 0xA8181B1C [ 2.63 GB ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM16)
MODE : PRELOADER PORT
PORT : 16
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000005
BROM : SecMode  : SBC+SDA
BROM : BROM|BL  : 0xFF|0x03
BROM : PRELOADER PORT
MODE : INFINIX : SEC_NEW | Manual : Disabled
BROM : SOCID : 1B638CCC3482FD467B96B7A3AF5F99EEB17B5D506CE8BAB047D2AF901ACE8ADF
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00080000 [ 512.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: 150100514436334D42011EC86A3EC661
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : QD63MB
        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : C60B52A0495BBB685B9D1D42F97B3746

DA : USB : HIGH-SPEED

Boot done!

[FL] : HW verification passed!

SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432

[FL] : Pre-Erase 
Erase : 0x0000000000000000 : 0x0000000000108000
Erase : 0x0000000000408000 : 0x0000000004C1A000
Erase : 0x0000000007022000 : 0x00000000047DE000
Erase : 0x000000000F800000 : 0x000000000BB00000
Erase : 0x000000001F300000 : 0x00000001AA500000

[FL] : RePartition 
[FL] : RePartition Ok!


[FL] : Flashing now ... 

Write : PRELOADER
Update bootloader backup copy ... 
Update bootloader backup copy Ok!
Write : TKV
Write : RECOVERY
Write : MD1IMG
Write : SPMFW
Write : SCP1
Write : SCP2
Write : SSPM_1
Write : SSPM_2
Write : LK
Write : LK2
Write : BOOT
Write : LOGO
Write : DTBO
Write : TEE1
Write : TEE2
Write : VBMETA
Write : VBMETA_SYSTEM
ERR : 0xC002002A
ERR : SEC : IMG TYPE MISMATCH
ERR : 0x00001000|0x00001000

Error : Flashing failed!
>>> Seems as something wrong with device! Check battery charge and device state!

Reconnect Power/Cable!

NOW DEVICE IS TOTALLY DEAD AND ASK FOR AUTH I BOOTROOM MODE HERE IS LOG WHEN I TRIED TO IDENTIFY:

Code:

Operation : Identify [ v2.12 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM17)
MODE : BOOTROM
PORT : 17
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+ARB
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
MODE : INFINIX : SEC_NEW | Manual : Disabled
BROM : SOCID : 1B638CCC3482FD467B96B7A3AF5F99EEB17B5D506CE8BAB047D2AF901ACE8ADF
BROM : ARB : ACTIVE : LOG : F0: 102B 0000  F3: 0000 0000 [0200]  V0: 0000 0000 [0001]
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...

  BROM  : 0x00007017 : DA SEND ERROR!
  ERROR : SECURE BOOT : SLA REQUIRED IN BROM MODE!
  INFO : BROM Level : CERT/AUTH required! Try boot device in PRELOADER mode with select PL/PL_CRYPTO/SWSEC type!

Error : Fail to init protocol!
>>> Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable!

CAN ANYONE HELP ME????????

sahassan82 · 07-11-2020, 18:24

Wait for update 2.13

safina gsm · 07-11-2020, 19:21

Quote:

Originally Posted by sahassan82

Wait for update 2.13

software can't deal with brom mode because the device has wrong preloader inside......it asks for auth file and stopping at SLA challenge

can anyone give me auth file for this device or can cm2 deal with this problem?

Yusuf Lawal · 07-11-2020, 19:47

There is da+auth file exist on support.

http://dl1.infinity-box.com/00/index...o-Dollyphin.7z

safina gsm · 07-12-2020, 00:46

Quote:

Originally Posted by Yusuf Lawal

There is da+auth file exist on support.

Index of

Thanks,i will try and post result tomorrow

safina gsm · 07-16-2020, 01:23

Quote:

Originally Posted by Yusuf Lawal

There is da+auth file exist on support.

Index of

auth file accepted and read device info

Code:

Card found : 3716BCA6 , v0144
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.12

Load IDBase v518137 Ok!


 EMI : DEV : MT6761
 EMI : SRC : preloader_x680_h6116.bin
 EMI : CNT : 0008
 EMI : [00] : eMMC : DDR3 : ID : 90014A68423861503E : VEN : HYNIX     | DEV : hB8aP> : RAM : [ 3.00 GB ]
 EMI : [01] : eMMC : DDR3 : ID : 90014A484247346132 : VEN : HYNIX     | DEV : HBG4a2 : RAM : [ 3.00 GB ]
 EMI : [02] : eMMC : DDR3 : ID : 90014A68423861503E : VEN : HYNIX     | DEV : hB8aP> : RAM : [ 2.00 GB ]
 EMI : [03] : eMMC : DDR3 : ID : 150100514436334D42 : VEN : SAMSUNG   | DEV : QD63MB : RAM : [ 2.00 GB ]
 EMI : [04] : eMMC : DDR3 : ID : 150100475836424142 : VEN : SAMSUNG   | DEV : GX6BAB : RAM : [ 3.00 GB ]
 EMI : [05] : eMMC : DDR3 : ID : 150100515836334142 : VEN : SAMSUNG   | DEV : QX63AB : RAM : [ 2.00 GB ]
 EMI : [06] : eMMC : DDR3 : ID : 90014A484347386134 : VEN : HYNIX     | DEV : HCG8a4 : RAM : [ 4.00 GB ]
 EMI : [07] : eMMC : DDR3 : ID : 700100474D424D4541 : VEN : KINGSTON  | DEV : GMBMEA : RAM : [ 2.00 GB ]

Operation : Identify [ v2.12 ]
Mode : FLASH

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM7)
MODE : BOOTROM
PORT : 7
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+ARB
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
MODE : INFINIX : SEC_NEW | Manual : Enabled
BROM : SOCID : 1B638CCC3482FD467B96B7A3AF5F99EEB17B5D506CE8BAB047D2AF901ACE8ADF
BROM : ARB : ACTIVE : LOG : F0: 102B 0000  F3: 0000 0000 [0200]  V0: 0000 0000 [0001]
BROM : SLA
BROM : SLA Passed!
BROM : SLA CHLNG not used
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : MT6761
     EMI : SRC : preloader_x680_h6116.bin
     EMI : CNT : 0008
 EMI : [00] : eMMC : DDR3 : ID : 90014A68423861503E : VEN : HYNIX     | DEV : hB8aP> : RAM : [ 3.00 GB ]
 EMI : [01] : eMMC : DDR3 : ID : 90014A484247346132 : VEN : HYNIX     | DEV : HBG4a2 : RAM : [ 3.00 GB ]
 EMI : [02] : eMMC : DDR3 : ID : 90014A68423861503E : VEN : HYNIX     | DEV : hB8aP> : RAM : [ 2.00 GB ]
 EMI : [03] : eMMC : DDR3 : ID : 150100514436334D42 : VEN : SAMSUNG   | DEV : QD63MB : RAM : [ 2.00 GB ]
 EMI : [04] : eMMC : DDR3 : ID : 150100475836424142 : VEN : SAMSUNG   | DEV : GX6BAB : RAM : [ 3.00 GB ]
 EMI : [05] : eMMC : DDR3 : ID : 150100515836334142 : VEN : SAMSUNG   | DEV : QX63AB : RAM : [ 2.00 GB ]
 EMI : [06] : eMMC : DDR3 : ID : 90014A484347386134 : VEN : HYNIX     | DEV : HCG8a4 : RAM : [ 4.00 GB ]
 EMI : [07] : eMMC : DDR3 : ID : 700100474D424D4541 : VEN : KINGSTON  | DEV : GMBMEA : RAM : [ 2.00 GB ]
     EMI : Init EMI from PRELOADER
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00080000 [ 512.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: 150100514436334D42011EC86A3EC661
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : QD63MB
        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : C60B52A0495BBB685B9D1D42F97B3746

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : QP1A.190711.020
Display ID     : X680C-H6118DE-QGo-OP-200511V86
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2020-04-05
Build Time     : 1589176637
Product Info   : x680c_h6118
Product Board  : Infinix-X680C
Board Platform : mt6761

USERDATA : FILESYSTEM : F2FS  with FBE ( File-Base Encryption )

NVRAM check : Failed! NVRAM empty!
NVRAM : SEC NORMAL  [ No extra security ]

STORAGE : LifeStatus : Verify NOT supported by DA/HW!

Done!
Elapsed: 00:01:36

flash right preloader done

Code:

Preloader [HW DEV] Info : 
 EMI : DEV : MT6761
 EMI : SRC : preloader_x680_h6116.bin
 EMI : CNT : 0008
 EMI : [00] : eMMC : DDR3 : ID : 90014A68423861503E : VEN : HYNIX     | DEV : hB8aP> : RAM : [ 3.00 GB ]
 EMI : [01] : eMMC : DDR3 : ID : 90014A484247346132 : VEN : HYNIX     | DEV : HBG4a2 : RAM : [ 3.00 GB ]
 EMI : [02] : eMMC : DDR3 : ID : 90014A68423861503E : VEN : HYNIX     | DEV : hB8aP> : RAM : [ 2.00 GB ]
 EMI : [03] : eMMC : DDR3 : ID : 150100514436334D42 : VEN : SAMSUNG   | DEV : QD63MB : RAM : [ 2.00 GB ]
 EMI : [04] : eMMC : DDR3 : ID : 150100475836424142 : VEN : SAMSUNG   | DEV : GX6BAB : RAM : [ 3.00 GB ]
 EMI : [05] : eMMC : DDR3 : ID : 150100515836334142 : VEN : SAMSUNG   | DEV : QX63AB : RAM : [ 2.00 GB ]
 EMI : [06] : eMMC : DDR3 : ID : 90014A484347386134 : VEN : HYNIX     | DEV : HCG8a4 : RAM : [ 4.00 GB ]
 EMI : [07] : eMMC : DDR3 : ID : 700100474D424D4541 : VEN : KINGSTON  | DEV : GMBMEA : RAM : [ 2.00 GB ]

Operation : Write Flash [ v2.12 ]

Repartition   : Enabled
Flash Verify  : Disabled
Reg.Pre-Erase : Enabled
Verify HW/SW  : Enabled
SData Backup  : Disabled
Safe UserData : Disabled
Flash Format  : Disabled

Files :23
[FL] : Set : preloader_x680_h6116.bin
[FL] : Set : tkv.img
[FL] : Set : recovery.img
[FL] : Set : md1img-verified.img
[FL] : Set : spmfw-verified.img
[FL] : Set : scp-verified.img
[FL] : Set : scp-verified.img
[FL] : Set : sspm-verified.img
[FL] : Set : sspm-verified.img
[FL] : Set : lk-verified.img
[FL] : Set : lk-verified.img
[FL] : Set : boot.img
[FL] : Set : logo-verified.bin
[FL] : Set : dtbo-verified.img
[FL] : Set : tee-verified.img
[FL] : Set : tee-verified.img
[FL] : Set : vbmeta.img
[FL] : Set : vbmeta_system.img
[FL] : Set : vbmeta_vendor.img
[FL] : Set : super.img
[FL] : Set : cache.img
[FL] : Set : tranfs.img
[FL] : Set : userdata.img

[FL] : Total size : 0xAB41F394 [ 2.68 GB ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM7)
MODE : BOOTROM
PORT : 7
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+ARB
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
MODE : INFINIX : SEC_NEW | Manual : Enabled
BROM : SOCID : 1B638CCC3482FD467B96B7A3AF5F99EEB17B5D506CE8BAB047D2AF901ACE8ADF
BROM : ARB : ACTIVE : LOG : F0: 102B 0000  F3: 0000 0000 [0200]  V0: 0000 0000 [0001]
BROM : SLA
BROM : SLA Passed!
BROM : SLA CHLNG not used
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : MT6761
     EMI : SRC : preloader_x680_h6116.bin
     EMI : CNT : 0008
 EMI : [00] : eMMC : DDR3 : ID : 90014A68423861503E : VEN : HYNIX     | DEV : hB8aP> : RAM : [ 3.00 GB ]
 EMI : [01] : eMMC : DDR3 : ID : 90014A484247346132 : VEN : HYNIX     | DEV : HBG4a2 : RAM : [ 3.00 GB ]
 EMI : [02] : eMMC : DDR3 : ID : 90014A68423861503E : VEN : HYNIX     | DEV : hB8aP> : RAM : [ 2.00 GB ]
 EMI : [03] : eMMC : DDR3 : ID : 150100514436334D42 : VEN : SAMSUNG   | DEV : QD63MB : RAM : [ 2.00 GB ]
 EMI : [04] : eMMC : DDR3 : ID : 150100475836424142 : VEN : SAMSUNG   | DEV : GX6BAB : RAM : [ 3.00 GB ]
 EMI : [05] : eMMC : DDR3 : ID : 150100515836334142 : VEN : SAMSUNG   | DEV : QX63AB : RAM : [ 2.00 GB ]
 EMI : [06] : eMMC : DDR3 : ID : 90014A484347386134 : VEN : HYNIX     | DEV : HCG8a4 : RAM : [ 4.00 GB ]
 EMI : [07] : eMMC : DDR3 : ID : 700100474D424D4541 : VEN : KINGSTON  | DEV : GMBMEA : RAM : [ 2.00 GB ]
     EMI : Init EMI from PRELOADER
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00080000 [ 512.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: 150100514436334D42011EC86A3EC661
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : QD63MB
        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : C60B52A0495BBB685B9D1D42F97B3746

DA : USB : HIGH-SPEED

Boot done!

[FL] : HW verification passed!

SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432

[FL] : Pre-Erase 
Erase : 0x0000000000000000 : 0x0000000000108000
Erase : 0x0000000000408000 : 0x0000000004C1A000
Erase : 0x0000000007022000 : 0x00000000047DE000
Erase : 0x000000000F800000 : 0x000000000BB00000
Erase : 0x000000001F300000 : 0x00000001A1500000

[FL] : RePartition 
[FL] : RePartition Ok!


[FL] : Flashing now ... 

Write : PRELOADER
Update bootloader backup copy ... 
Update bootloader backup copy Ok!
Write : TKV
Write : RECOVERY
Write : MD1IMG
Write : SPMFW
Write : SCP1
Write : SCP2
Write : SSPM_1
Write : SSPM_2
Write : LK
Write : LK2
Write : BOOT
Write : LOGO
Write : DTBO
Write : TEE1
Write : TEE2
Write : VBMETA
Write : VBMETA_SYSTEM
ERR : 0xC002002A
ERR : SEC : IMG TYPE MISMATCH
ERR : 0x00001000|0x00001000

Error : Flashing failed!
>>> Seems as something wrong with device! Check battery charge and device state!

Reconnect Power/Cable!

same error while flashing

even use latest version

JayDi · 07-27-2020, 11:58

Quote:

Originally Posted by safina gsm

auth file accepted and read device info
same error while flashing

even use latest version

https://forum.gsmhosting.com/vbb/f29...rules-2871087/

We made solution to avoid that. If 2.14 not will be at support, when you read that thread - PM me for obtain test version.

safina gsm · 07-29-2020, 08:29

Quote:

Originally Posted by JayDi

https://forum.gsmhosting.com/vbb/f29...rules-2871087/

We made solution to avoid that. If 2.14 not will be at support, when you read that thread - PM me for obtain test version.

thanks for reply ....but unfortunately have't this device in hand

i'll try to get it again ,,, if it done i'll post result

JayDi · 07-29-2020, 09:26

It will be done, so, if get it again - just reflash it.

07-11-2020, 18:24	#2 (permalink)
sahassan82 No Life Poster Join Date: Feb 2005 Location: Pakistan Posts: 977 Member: 116955 Status: Offline Sonork: 100.1604268 Thanks Meter: 992	Wait for update 2.13

07-11-2020, 19:47	#4 (permalink)
Yusuf Lawal No Life Poster Join Date: Oct 2011 Location: Nigeria Posts: 6,593 Member: 1677653 Status: Offline Thanks Meter: 2,769	There is da+auth file exist on support. http://dl1.infinity-box.com/00/index...o-Dollyphin.7z

07-29-2020, 09:26	#9 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	It will be done, so, if get it again - just reflash it.