infinty team plz help me ztc - GSM-Forum

faisal_fs · 07-24-2009, 09:49

COM4 [VCP0] selected
module v2.84
Action: touchscreen calibration
mode: 1
Calibration order: reverse
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:E603:0003
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: MAUI.06B.W07.20.MP.V12
Version: MTK25_06B_HW
detecting structure #2...
0 done
44 byte(s) read
imei: 35790246811221
connection Ok
detecting structure #5 (mode-1)...
19 18 17 16 done
160 byte(s) read
writing data...
verification...
error: verification failed
Finished, time used: 19 sec
Remove/Install battery now !

faisal_fs · 07-24-2009, 09:51

this set ztc 989 formate comlete but and panal not work

**InfinitySupport** · 07-25-2009, 17:03

Hello,

Try to make "format ffs", then power-on and power-off phone and then make "calibration" again.

07-24-2009, 09:49	#1 (permalink)
faisal_fs No Life Poster Join Date: Jun 2007 Posts: 784 Member: 532257 Status: Offline Sonork: 1624266 Thanks Meter: 64	infinty team plz help me ztc COM4 [VCP0] selected module v2.84 Action: touchscreen calibration mode: 1 Calibration order: reverse Model: Autodetect 6205-6227 NOR Checking data, wait... Phone should be Switched OFF ! Press and HOLD Power button now ! 19200 autodetect Initializing [6225:8A03:8A00]... CPU: MT6225 high speed boot On chip: 0001:E603:0003 status: FF Connecting at 19200, wait... Release Power button now ! Phone detected, wait... Hardware: MT6225,E03 Date: 2006.06.14 Version: 1.0 Version: MAUI.06B.W07.20.MP.V12 Version: MTK25_06B_HW detecting structure #2... 0 done 44 byte(s) read imei: 35790246811221 connection Ok detecting structure #5 (mode-1)... 19 18 17 16 done 160 byte(s) read writing data... verification... error: verification failed Finished, time used: 19 sec Remove/Install battery now !

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
infinty team plz help me	faisal_fs	Infinity-Box	1	08-15-2009 21:41
infinty team plz help me	faisal_fs	Infinity-Box	2	07-28-2009 06:35
infinty team plz help me under 12 houarskg200 dead after whole flash chip formate	faisal_fs	Infinity-Box	8	07-06-2009 10:48
infinty team plz help me	faisal_fs	Infinity-Box	2	06-27-2009 15:02
infinty team plz help me	sonumobilewala	Infinity-Box	6	06-20-2008 20:29

07-24-2009, 09:51	#2 (permalink)
faisal_fs No Life Poster Join Date: Jun 2007 Posts: 784 Member: 532257 Status: Offline Sonork: 1624266 Thanks Meter: 64	this set ztc 989 formate comlete but and panal not work

07-25-2009, 17:03	#3 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Hello, Try to make "format ffs", then power-on and power-off phone and then make "calibration" again.