Someone know what model is this chinese phone ... - GSM-Forum

debeliamark · 02-04-2008, 12:19

And pinouts ( conector is 2x6 pins ) like miniUSB
Please, take a look on the picture:

http://rapidshare.com/files/89058764/DSC00084.JPG.html

WBR, Debeliamark

P.S. info readed via original USB cable:

Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: MT6226, E02
Hardware version: M22M00AB1
Software version: M22M00AB0502.5.3.1.0
Software date: 2005.04.12
Barcode: MT012345678901234567
imei: 135790246811220
Finished, time used: 4 sec
Power off phone now !

InfinityHelp · 02-04-2008, 15:25

hello!

yes, this is MT62...family MCU based phone.
what problem with phone?

debeliamark · 02-04-2008, 16:26

look like is named Bluetooth_Audi, but can't connect it via Infinity and self maded RJ -> to phone conector ... using Multi-Box pinout info, only via original USB

In fact phone drive it's crasy - just restarts do not catch seconf ( B ) SIM ... ect ... things that usualy happened in these units

InfinityHelp · 02-04-2008, 17:01

hello!

yes, this unit must be formatted.
what connector you have? where is located GND pin?

debeliamark · 02-04-2008, 17:42

2x6 pins - like microUSB, on PCB side go to 12 in line - 2 and 5 ( count on back PCB side left to right ) is a GND, USB +5V go to pin 12, 7 and 10 are wired to +USB_data and +USB_data

debeliamark · 02-04-2008, 19:05

Solved - will post pinouts later - 1 and 3 are Rx and Tx - 2 or 5 is GND phone containt: L268_SG_B_PCB01_GPRS_MT6226_S01.M22M00AB0502_5_3_1 _0D0806C02.BIN

02-04-2008, 12:19	#1 (permalink)
debeliamark No Life Poster Join Date: May 2001 Location: Bulgaria Age: 56 Posts: 4,796 Member: 4627 Status: Offline Sonork: 57528:debeliamark Thanks Meter: 1,034	Someone know what model is this chinese phone ... And pinouts ( conector is 2x6 pins ) like miniUSB Please, take a look on the picture: http://rapidshare.com/files/89058764/DSC00084.JPG.html WBR, Debeliamark P.S. info readed via original USB cable: Action: read information Model: Autodetect 6205-6227 NOR Checking data, wait... Phone should be Switched ON ! Connecting, wait... Phone detected, wait... Hardware version: MT6226, E02 Hardware version: M22M00AB1 Software version: M22M00AB0502.5.3.1.0 Software date: 2005.04.12 Barcode: MT012345678901234567 imei: 135790246811220 Finished, time used: 4 sec Power off phone now !

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
do you know what model is this phone ?	yurais	NEC	4	03-20-2008 09:10
help me to know the model of this chinese phone	tsarkh	Infinity-Box	4	09-28-2007 15:22
Nokia NHE-4NX - What model is this??	Ol80	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	01-25-2005 11:02
What model is this Siemens?	Bogi	x1x to x45/x50	1	04-25-2002 00:42
need to know the model of this AEG phone	makona	Various	2	10-07-2000 07:43

02-04-2008, 15:25	#2 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! yes, this is MT62...family MCU based phone. what problem with phone?

02-04-2008, 16:26	#3 (permalink)
debeliamark No Life Poster Join Date: May 2001 Location: Bulgaria Age: 56 Posts: 4,796 Member: 4627 Status: Offline Sonork: 57528:debeliamark Thanks Meter: 1,034	look like is named Bluetooth_Audi, but can't connect it via Infinity and self maded RJ -> to phone conector ... using Multi-Box pinout info, only via original USB In fact phone drive it's crasy - just restarts do not catch seconf ( B ) SIM ... ect ... things that usualy happened in these units

02-04-2008, 17:01	#4 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! yes, this unit must be formatted. what connector you have? where is located GND pin?

02-04-2008, 17:42	#5 (permalink)
debeliamark No Life Poster Join Date: May 2001 Location: Bulgaria Age: 56 Posts: 4,796 Member: 4627 Status: Offline Sonork: 57528:debeliamark Thanks Meter: 1,034	2x6 pins - like microUSB, on PCB side go to 12 in line - 2 and 5 ( count on back PCB side left to right ) is a GND, USB +5V go to pin 12, 7 and 10 are wired to +USB_data and +USB_data

02-04-2008, 19:05	#6 (permalink)
debeliamark No Life Poster Join Date: May 2001 Location: Bulgaria Age: 56 Posts: 4,796 Member: 4627 Status: Offline Sonork: 57528:debeliamark Thanks Meter: 1,034	Solved - will post pinouts later - 1 and 3 are Rx and Tx - 2 or 5 is GND phone containt: L268_SG_B_PCB01_GPRS_MT6226_S01.M22M00AB0502_5_3_1 _0D0806C02.BIN