GSM-Forum - Lenovo k5 note frp problem

PHONE HISTORY FRP PRO

1 READ FACTORY FIRMWARE

Start at : [18/10/2016 / 11:52:31 PM]
Operation : Read Flash [ v1.57 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
DAgent configured successfully
Connection agent : PRELOADER
DRAM already initialized by Preloader
Link with DAgent established
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM41X
[eMMC] : FLASH_CID : 150100525831344D42075169D0186307
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID : 0xE79314A952367605A15ACD322DC41C8A
INT RAM : 0x00000000
EXT RAM : 0x80000000 [2 GiB]
[NAND] : FLASH : NOT INSTALLED
[UFSM] : FLASH : NOT INSTALLED
[HSUSB] : MODE : HIGH-SPEED
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand : Lenovo
ProdName : k52_a48
ProdModel : Lenovo A7020a48
Device : A7020a48
AndroidVer: 6.0
MTKxCPU : MT6755
MTKxPRJ : A7020a48_USR_S312_1609261808_mp7-V2.3_lenovo6755.66c.m_P148_ROW

[Read Ok] : preloader_k52_a48.bin
[Read Ok] : recovery.img
[Read Ok] : persist.img
[Read Ok] : efuse.img
[Read Ok] : md1img.img
[Read Ok] : md1dsp.img
[Read Ok] : md1arm7.img
[Read Ok] : md3img.img
[Read Ok] : lk.bin
[Read Ok] : lk2.bin
[Read Ok] : boot.img
[Read Ok] : logo.bin
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : secro.img
[Read Ok] : preload.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6755 / V1.1.2 / k52_a48 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 3295 MiB
Scatter saved to : C:\Users\admin\Desktop\MT6755__Lenovo__Lenovo_A702 0a48__A7020a48__6.0__A7020a48_USR_S312_1609261808_ mp7-V2.3_lenovo6755.66c.m_P148_ROW\

All done!

Done!
Elapsed: 00:04:56
Reconnect Power/Cable!

2 STEP
RESET FRP

Start at : [18/10/2016 / 11:59:44 PM]
Operation : Format FileSystem [ v1.57 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
DAgent configured successfully
Connection agent : PRELOADER
DRAM already initialized by Preloader
Link with DAgent established
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM41X
[eMMC] : FLASH_CID : 150100525831344D42075169D0186307
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID : 0xE79314A952367605A15ACD322DC41C8A
INT RAM : 0x00000000
EXT RAM : 0x80000000 [2 GiB]
[NAND] : FLASH : NOT INSTALLED
[UFSM] : FLASH : NOT INSTALLED
[HSUSB] : MODE : HIGH-SPEED
Boot Ok!

Clear FRP ( Google Reset Protection )
Clear Ok!
Clear PVL ( PrivacyLock )
Clear Ok!
Clear DIN
Clear Ok!
Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!

Done!
Elapsed: 00:00:50
Reconnect Power/Cable!

Finish at : [19/10/2016 / 12:00:35 AM]

AFTER FORMAT FILE SYSTEM
HANDSET DL TOOL ERROR PRO

3 STEP
FIX DL MODE

Start at : [19/10/2016 / 12:02:36 AM]
Operation : Fix DL Errors [ v1.57 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
DAgent configured successfully
Connection agent : PRELOADER
DRAM already initialized by Preloader
Link with DAgent established
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM41X
[eMMC] : FLASH_CID : 150100525831344D42075169D0186307
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID : 0xE79314A952367605A15ACD322DC41C8A
INT RAM : 0x00000000
EXT RAM : 0x80000000 [2 GiB]
[NAND] : FLASH : NOT INSTALLED
[UFSM] : FLASH : NOT INSTALLED
[HSUSB] : MODE : HIGH-SPEED
Boot Ok!

DA DLFix Passed!

Done!
Elapsed: 00:02:38
Reconnect Power/Cable!

Finish at : [19/10/2016 / 12:05:15 AM]

DL MODE ERROR PRO SAME
PROBLEM NOT SOLVE
:(

4 STEP
WRITE FIRMWARE BACK
FOR BACK CONDITION
FRP CONDTION

Scatter Load Ok , BaseBand : MT6755 , Project : k52_a48 , Storage : EMMC
Files found : 19 , Set to Flash : 18
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand : Lenovo
Device Model : A7020a48
Device CPU : MT6755
Device IntName : k52_a48
Device Version : 6.0
Device Compile : 26/09/2016 10:33:20 AM
Device Project : A7020a48_USR_S312_1609261808_mp7-V2.3_lenovo6755.66c.m_P148_ROW
Device ExtInfo : Lenovo A7020a48
Ready to Flash!

Start at : [19/10/2016 / 12:06:50 AM]
Operation : Flash [ v1.57 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
DAgent configured successfully
Connection agent : PRELOADER
DRAM already initialized by Preloader
Link with DAgent established
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM41X
[eMMC] : FLASH_CID : 150100525831344D42075169D0186307
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID : 0xE79314A952367605A15ACD322DC41C8A
INT RAM : 0x00000000
EXT RAM : 0x80000000 [2 GiB]
[NAND] : FLASH : NOT INSTALLED
[UFSM] : FLASH : NOT INSTALLED
[HSUSB] : MODE : HIGH-SPEED
Boot Ok!

ScatCFG : BaseBand : MT6755 , Project : k52_a48 , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled

M67BL : Check eMMC compatibility
M67BL : eMMC supported by BootLoader!

Selected forced PMT update
Build new PMT ...
Update Primary ...
Update Mirror ...
PMT update Ok!

M67BL : Flash Erase
Total blocks to Erase : 5
Erase : 0x0000000000008000-0x0000000001A80000
Erase : 0x0000000001BC8000-0x0000000007000000
Erase : 0x000000000A000000-0x0000000001000000
Erase : 0x000000000B300000-0x0000000002480000
Erase : 0x000000000DC80000-0x0000000738F7BE00
Flash Erase Done, time used : 00:00:03

Processing : Writing all Flash Files
Flash Partition : PRELOADER
Flash PLC
Image Flash Ok
Flash Partition : RECOVERY
Image Flash Failed!
Something wrong with files or connection!

Operation Failed
Elapsed: 00:00:30
Reconnect Power/Cable!

Finish at : [19/10/2016 / 12:07:19 AM]

Start at : [19/10/2016 / 12:07:42 AM]
Operation : Flash [ v1.57 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
DAgent configured successfully
Connection agent : PRELOADER
DRAM already initialized by Preloader
Link with DAgent established
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM41X
[eMMC] : FLASH_CID : 150100525831344D42075169D0186307
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID : 0xE79314A952367605A15ACD322DC41C8A
INT RAM : 0x00000000
EXT RAM : 0x80000000 [2 GiB]
[NAND] : FLASH : NOT INSTALLED
[UFSM] : FLASH : NOT INSTALLED
[HSUSB] : MODE : HIGH-SPEED
Boot Ok!

ScatCFG : BaseBand : MT6755 , Project : k52_a48 , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled

M67BL : Check eMMC compatibility
M67BL : eMMC supported by BootLoader!

Selected forced PMT update
Build new PMT ...
Update Primary ...
Update Mirror ...
PMT update Ok!

M67BL : Flash Erase
Total blocks to Erase : 5
Erase : 0x0000000000008000-0x0000000001A80000
Erase : 0x0000000001BC8000-0x0000000007000000
Erase : 0x000000000A000000-0x0000000001000000
Erase : 0x000000000B300000-0x0000000002480000
Erase : 0x000000000DC80000-0x0000000738F7BE00
Flash Erase Done, time used : 00:00:02

Processing : Writing all Flash Files
Flash Partition : PRELOADER
Flash PLC
Image Flash Ok
Flash Partition : RECOVERY
Image Flash Failed!
Something wrong with files or connection!

Operation Failed
Elapsed: 00:00:19
Reconnect Power/Cable!

Finish at : [19/10/2016 / 12:08:00 AM]

I ALRAEDY TRY WITH SP FLASH TOOL LATEST TOOL
SAME PRO
HANDSET CANNOT FLASH
AND HANDSET HAVE SINGED FIRMWARE
PLZ HEP ME TEAM :(